W2TG - M-SYSTEMS - Elite.Parts

Description

M-Systems W2TG Mini-MW Series Space-saving Dual Output Signal Conditioner; Tachogenerator Transmitter

Part Number

W2TG

Price

Request Quote

Manufacturer

M-SYSTEMS

Lead Time

Request Quote

Category

TBD

Specifications

Approx. 4 VA at 100 V; Approx. 5 VA at 200 V; Approx. 6 VA at 240 V

Accuracy

±0.4 %

Connection

M3 screw terminals (torque 0.8 N•m)

Construction

Plug-in

Approx. 3 W

Dielectric strength

2000 V AC @1 minute (input to output 1 to output 2 to power to ground)

Housing material

Flame-resistant resin (black)

Insulation resistance

Greater than 100 M Omega with 500 V DC

Isolation

Input to output 1 to output 2 to power

Line voltage effect

±0.1 % over voltage range

Mounting

Surface or DIN rail

Operating humidity

30 to 90 %RH (non-condensing)

Operating temperature

-5 to +55°C (23 to 131°F)

Over-range output

0 to 120 % at 1 – 5 V

Response time

Less than 0.7 sec. (0 – 90 %)

Ripple

0.5 %p-p max. (100/120 Hz)

Span adjustment

95 to 105 % (front)

Temp. coefficient

±0.05 %/°C (±0.03 %/°F)

Weight

200 g (0.44 lbs)

Zero adjustment

-5 to +5 % (front)

Features

2000V AC isolation
Base socket included with modules
CE marking and UL/C-UL Class 1 Div 2 approval
Converts an AC voltage from a tachogenerator (tachometer) into a standard process signal
Fixed range or PC programmable models selectable
Selectable 100-240V AC/24V DC power input
Standard DIN rail or surface mounting
Two independent output ranges
W2 use a compact-size, plug-in socket base for quick installation or replacement of modules without disturbing wiring.
Wide input range

Datasheet

W2TG-1578410923.pdf

88 KiB

Download

Extracted Text

Model ZERO SPAN ZERO SPAN MODEL: W2TG A: 0 – 200 V AC (Input resistance 100 kΩ min.) Space-saving Dual Output Signal Conditioners B: 0 – 250 V AC (Input resistance 100 kΩ min.) Mini-MW Series U: Specify voltage (0 % input must be 0 V.) TACHOGENERATOR TRANSMITTER [2] OUTPUT 1 Functions & Features Current • Converts an AC voltage from a tachogenerator A: 4 – 20 mA DC (Load resistance 750 Ω max.) (tachometer) into a standard process signal B: 2 – 10 mA DC (Load resistance 1500 Ω max.) • Wide input range C: 1 – 5 mA DC (Load resistance 3000 Ω max.) • Two independent output ranges D: 0 – 20 mA DC (Load resistance 750 Ω max.) • CE marking E: 0 – 16 mA DC (Load resistance 900 Ω max.) • UL approval F: 0 – 10 mA DC (Load resistance 1500 Ω max.) G: 0 – 1 mA DC (Load resistance 15 kΩ max.) Typical Applications Z: Specify current (See OUTPUT SPECIFICATIONS) • Measuring rotating or moving speed of multispeed Voltage motors, belt conveyers, metering pumps 1: 0 – 10 mV DC (Load resistance 10 kΩ min.) 2: 0 – 100 mV DC (Load resistance 100 kΩ min.) 29.5 (1.16) 3: 0 – 1 V DC (Load resistance 1000 Ω min.) 4: 0 – 10 V DC (Load resistance 10 kΩ min.) 5: 0 – 5 V DC (Load resistance 5000 Ω min.) 89 6: 1 – 5 V DC (Load resistance 5000 Ω min.) (3.51) 4W: -10 – +10 V DC (Load resistance 10 kΩ min.) 5W: -5 – +5 V DC (Load resistance 5000 Ω min.) 0: Specify voltage (See OUTPUT SPECIFICATIONS) 124 (4.88) mm (inch) [3] OUTPUT 2 Y: None Current MODEL: W2TG–[1][2][3]-[4][5] A: 4 – 20 mA DC (Load resistance 350 Ω max.) B: 2 – 10 mA DC (Load resistance 700 Ω max.) ORDERING INFORMATION C: 1 – 5 mA DC (Load resistance 1400 Ω max.) • Code number: W2TG-[1][2][3]-[4][5] D: 0 – 20 mA DC (Load resistance 350 Ω max.) Specify a code from below for each [1] through [5]. E: 0 – 16 mA DC(Load resistance 430 Ω max.) (e.g. W2TG-UAA-M2/CE/Q) F: 0 – 10 mA DC (Load resistance 700 Ω max.) • Special input and output ranges (For codes U, Z & 0) G: 0 – 1 mA DC (Load resistance 7000 Ω max.) • Specify the specification for option code ‘Q.’ Z: Specify current (See OUTPUT SPECIFICATIONS) (e.g. /C01/S01) Voltage Note: If one of the outputs should be a current range, Same range availability as Output 1 specify it for the Output 1 to allow a greater load. [4] POWER INPUT [1] INPUT AC Power Voltage M2: 100 – 240 V AC (Operational voltage range 85 – 264 V, 1: 0 – 35 V AC (Input resistance 100 kΩ min.) 47 – 66 Hz) 2: 0 – 50 mV AC (Input resistance 100 kΩ min.) (90 – 264 V for UL) 3: 0 – 60 mV AC (Input resistance 100 kΩ min.) DC Power 4: 0 – 100 mV AC (Input resistance 100 kΩ min.) R: 24 V DC 5: 0 – 1 V AC (Input resistance 100 kΩ min.) (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) 6: 0 – 10 V AC (Input resistance 100 kΩ min.) R2: 11 – 27 V DC 7: 0 – 100 V AC (Input resistance 100 kΩ min.) (Operational voltage range 11 – 27 V, ripple 10 %p-p max.) 8: 0 – 110 V AC (Input resistance 100 kΩ min.) (Select ‘/N’ for ‘Standards & Approvals’ code.) 9: 0 – 150 V AC (Input resistance 100 kΩ min.) P: 110 V DC http://www.m-system.co.jp/ W2TG SPECIFICATIONS ES-5539 Rev.6 Page 1/3 MODEL: W2TG (Operational voltage range 85 – 150 V, ripple 10 %p-p max.) Approx. 4 VA at 100 V (110 V ±10 % for UL) Approx. 5 VA at 200 V Approx. 6 VA at 240 V •DC: Approx. 3 W [5] OPTIONS (multiple selections) Operating temperature: -5 to +55°C (23 to 131°F) Standards & Approvlas (must be specified) Operating humidity: 30 to 90 %RH (non-condensing) /N: Without CE or UL Mounting: Surface or DIN rail /CE: CE marking Weight: 200 g (0.44 lbs) /UL: UL approval, CE marking Other Options blank: none PERFORMANCE in percentage of span /Q: Option other than the above (specify the specification) Accuracy: ±0.4 % (UL not available) Temp. coefficient: ±0.05 %/°C (±0.03 %/°F) Response time: ≤ 0.7 sec. (0 – 90 %) Ripple: 0.5 %p-p max. (100/120 Hz) SPECIFICATIONS OF OPTION: Q (multiple selections) Line voltage effect: ±0.1 % over voltage range COATING (For the detail, refer to M-System's web site.) Insulation resistance: ≥ 100 MΩ with 500 V DC /C01: Silicone coating Dielectric strength: 2000 V AC @1 minute (input to output /C02: Polyurethane coating 1 to output 2 to power to ground) /C03: Rubber coating TERMINAL SCREW MATERIAL /S01: Stainless steel STANDARDS & APPROVALS CE conformity: EMC Directive (2004/108/EC) GENERAL SPECIFICATIONS EMI EN 61000-6-4: 2007 Construction: Plug-in EMS EN 61000-6-2: 2005 Connection: M3 screw terminals (torque 0.8 N·m) Low Voltage Directive (2006/95/EC) Housing material: Flame-resistant resin (black) EN 61010-1: 2001 Isolation: Input to output 1 to output 2 to power Installation Category II Overrange output: 0 to 120 % at 1 – 5 V Pollution Degree 2 Zero adjustment: -5 to +5 % (front) Input or output 1 or output 2 to power input: Span adjustment: 95 to 105 % (front) Reinforced insulation (300 V) Input to output 1 to output 2: Basic insulation (300 V) INPUT SPECIFICATIONS Approval: •AC Voltage: 0 – 250 V AC UL/C-UL nonincendive Class I, Division 2, Minimum span: 50 mV Groups A, B, C, and D hazardous locations Frequency: 15 Hz min., 1 kHz max. with 100 % input (UL 1604:2004, CAN/CSA-C22.2 No.213:1987) Input resistance: ≥ 100 kΩ UL/C-UL general safety requirements (UL 61010B-1:2003, CAN/CSA-C22.2 No.61010-1:1992) OUTPUT SPECIFICATIONS ■ DC Current: 0 – 20 mA DC Minimum span: 1 mA Offset: Max. 1.5 times span Load resistance: Output drive 15 V max. for Output 1; 7 V max. for Output 2 ■ DC Voltage: -10 – +12 V DC (up to 10 V for Output 2) Minimum span: 5 mV Offset: Max. 1.5 times span Load resistance: Output drive 1 mA max.; at ≥ 0.5 V INSTALLATION Power Consumption •AC: http://www.m-system.co.jp/ W2TG SPECIFICATIONS ES-5539 Rev.6 Page 2/3 MODEL: W2TG DIMENSIONS unit: mm (inch) 6 (.23) DIN RAIL 3 2 1 35mm wide 6 5 4 2–4.2x5 (.17x.20) MTG HOLE 6 (.24) deep 9 8 7 11–M3 SCREW 11 10 22 (.87) 29.5 (1.16) 23 (.91) 10 (.39) 84 (3.31) 114 (4.49) [4 (.16)] When mounting, no extra space is needed between units. SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM Z S Isolation AC R.M.S. Output 1 7 + Amplifier Operation Driver INPUT OUTPUT 1 2 8 – Z S 4 Output + 3 Driver 5 OUTPUT 2 – 6 9 10 U(+) POWER 11 V(–) Base Socket Remark: The section enclosed by broken line is only with 2nd output option. Specifications are subject to change without notice. http://www.m-system.co.jp/ W2TG SPECIFICATIONS ES-5539 Rev.6 Page 3/3 89 (3.50) 53 (2.09) 59 (2.32) 72 (2.83) 4 (.16)

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products