Model MODEL: W2PP (When the low frequency open collector or the dry Space-saving Dual Output Signal Conditioners contact AC/DC switch is selected as one of the outputs, Mini-MW Series the frequency of the other output is limited to max. 30 Hz.) 4: 12 V pulse (max. frequency 10 kHz) PULSE ISOLATOR (When the low frequency open collector or the dry Functions & Features contact AC/DC switch is selected as one of the outputs, • Galvanically isolates pulse rate signals the frequency of the other output is limited to max. 30 Hz.) • Input frequency = output frequency 5: 24 V pulse (max. frequency 10 kHz) • Various outputs (open collector, voltage pulses and dry (When the low frequency open collector or the dry contact AC/DC switch) contact AC/DC switch is selected as one of the outputs, • High-density mounting the frequency of the other output is limited to max. 30 Hz.) • CE marking 6: Dry contact AC/DC switch (max. frequency 30 Hz) Typical Applications [3] OUTPUT 2 • Isolating field pulse signals in order to reduce noises Same range availability as Output 1 • Changing e.g. dry contact signal to e.g. 5 V signals Y: None 29.5 (1.16) [4] OUTPUT LOGIC N: The same as the input R: Inverted 89 (3.51) [5] POWER INPUT AC Power M2: 100 – 240 V AC (Operational voltage range 85 – 264 V, 124 47 – 66 Hz) (4.88) mm (inch) DC Power R: 24 V DC (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) MODEL: W2PP–[1][2][3][4]-[5][6] R2: 11 – 27 V DC (Operational voltage range 11 – 27 V, ripple 10 %p-p max.) (Select ‘/N’ for ‘Standards & Approvals’ code.) ORDERING INFORMATION P: 110 V DC • Code number: W2PP-[1][2][3][4]-[5][6] (Operational voltage range 85 – 150 V, ripple 10 %p-p max.) Specify a code from below for each [1] through [6]. (e.g. W2PP-333N-M2/CE/Q) • Specify the specification for option code ‘Q.’ [6] OPTIONS (multiple selections) (e.g. /C01/S01) Standards & Approvlas (must be specified) /N: Without CE /CE: CE marking Other Options [1] INPUT blank: none 1: Mechanical contact (max. frequency 30 Hz) /Q: Option other than the above (specify the specification) 2: Open collector (max. frequency 10 kHz) 3: Voltage pulse (max. frequency 10 kHz) SPECIFICATIONS OF OPTION: Q (multiple selections) COATING (For the detail, refer to M-System's web site.) [2] OUTPUT 1 /C01: Silicone coating 1: Low frequency open collector (max. frequency 30 Hz) /C02: Polyurethane coating 2: High frequency open collector (max. 10 kHz) /C03: Rubber coating (When the low frequency open collector or the dry TERMINAL SCREW MATERIAL contact AC/DC switch is selected as one of the outputs, /S01: Stainless steel the frequency of the other output is limited to max. 30 Hz.) 3: 5 V pulse (max. frequency 10 kHz) http://www.m-system.co.jp/ W2PP SPECIFICATIONS ES-5534 Rev.5 Page 1/4 MODEL: W2PP ≥ 250 Ω for 5 V GENERAL SPECIFICATIONS ≥ 600 Ω for 12 V Construction: Plug-in ≥ 1200 Ω for 24 V, output 1 Connection: M3 screw terminals (torque 0.8 N·m) ≥ 2400 Ω for 24 V, output 2 Housing material: Flame-resistant resin (black) ■ Dry Contact AC/DC Switch Isolation: Input to output 1 to output 2 to power 132 V AC @200 mA (cos ø = 1) Frequency range: Input and output are the same. 30 V DC @200 mA (resistive load) Chattering protection: Filter provided for mechanical Maximum frequency: 30 Hz contact input Timer: Limits within 75 ±25 msec. Input pulse sensing: DC coupled ON time for output logic non-inverted OFF time for output logic inverted INPUT SPECIFICATIONS (When the low frequency open collector or the dry contact Excitation: 12 V DC @30 mA; shortcircuit protection AC/DC switch is selected as one of the outputs, the timer is ■ Open Collector applied also to the other output.) Maximum frequency: 10 kHz Saturation voltage: 3 V DC Pulse width time requirement: 10 μsec. min. for ON and OFF Sensing: Approx. 12 V DC @3 mA INSTALLATION ON/OFF level: ≤ 200 Ω / 0.6 V for ON, ≥ 100 kΩ / 6 V for OFF Power Consumption ■ Mechanical Contact •AC: Maximum frequency: 30 Hz Approx. 4 VA at 100 V Pulse width time requirement: 10 msec. min. for ON and Approx. 5 VA at 200 V OFF Approx. 6 VA at 240 V Sensing: Approx. 12 V DC @3 mA •DC: Approx. 4 W ON/OFF level: ≤ 200 Ω / 0.6 V for ON, ≥ 100 kΩ / 6 V for OFF Operating temperature: -5 to +55°C (23 to 131°F) ■ Voltage Pulse Operating humidity: 30 to 90 %RH (non-condensing) Maximum frequency: 10 kHz Mounting: Surface or DIN rail Pulse width time requirement: 10 μsec. min. for high and Weight: 200 g (0.44 lbs) low levels Waveforms:Square or sine Hi/Lo level: 2 – 50 V for high level; ≤1 V for low level PERFORMANCE Input impedance: 10 kΩ min. Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 2000 V AC @1 minute (input to output 1 to output 2 to power to ground) OUTPUT SPECIFICATIONS ■ Low Frequency Open Collector: 50 V DC @100 mA (resistive load) STANDARDS & APPROVALS Maximum frequency: 30 Hz CE conformity: Timer: Limits within 75 ±25 msec. EMC Directive (2004/108/EC) ON time for output logic non-inverted EMI EN 61000-6-4: 2007 OFF time for output logic inverted EMS EN 61000-6-2: 2005 (When the low frequency open collector or the dry contact Low Voltage Directive (2006/95/EC) AC/DC switch is selected as one of the outputs, the timer is EN 61010-1: 2001 applied also to the other output.) Installation Category II Saturation voltage: 0.5 V DC Pollution Degree 2 ■ High Frequency Open Collector: Input or output 1 or output 2 to power input: 50 V DC @100 mA (resistive load) Reinforced insulation (300 V) Maximum frequency: 10 kHz Input to output 1 to output 2: Basic insulation (300 V) Saturation voltage: 0.5 V DC ■ Voltage Pulse Maximum frequency: 10 kHz High level: Rating (5, 12 or 24 V) ±10 % Low level: ≤ 0.5V Load resistance: http://www.m-system.co.jp/ W2PP SPECIFICATIONS ES-5534 Rev.5 Page 2/4 MODEL: W2PP OUTPUT LOGIC VOLTAGE PULSE OPEN COLLECTOR INPUT TYPE PULSE LOGIC INPUT PULSE OUTPUT DRY CONTACT AC/DC SW OUT H H OFF Non Inverted L L ON Voltage Pulse H H OFF Inverted L L ON OFF H OFF Non Inverted ON L ON Mechanical Contact Open Collector OFF H OFF Inverted ON L ON DIMENSIONS unit: mm (inch) 6 (.23) DIN RAIL 3 2 1 35mm wide 6 5 4 2–4.2x5 (.17x.20) MTG HOLE 6 (.24) deep 9 8 7 11–M3 SCREW 11 10 22 (.87) 29.5 (1.16) 23 (.91) 10 (.39) 84 (3.31) 114 (4.49) [4 (.16)] When mounting, no extra space is needed between units. http://www.m-system.co.jp/ W2PP SPECIFICATIONS ES-5534 Rev.5 Page 3/4 89 (3.50) 53 (2.09) 59 (2.32) 72 (2.83) 4 (.16) MODEL: W2PP SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM Isolation * Waveform Output + + 1 Timer 7 Shaper Driver INPUT OUTPUT 1 – – 2 8 SENSOR EXCITATION + 4 12V Supply Output 3 + Driver 5 OUTPUT 2 6 – 9 10 U(+) POWER 11 V(–) Base Socket *The timer is provided when the low frequency open collector or the dry contact AC/DC switch is selected as one of the outputs. Remark: The section enclosed by broken line is only with 2nd output option. Input Connection Examples Output Connection Examples � Mechanical Contact or Open Collector � Open Collector � Dry Contact AC/DC Switch • AC Powered Relay or Counter Coil + + 1 + + 7 7 Varistor or Spark – Quenching Circuit – 2 – – LOAD 8 8 – +12V PWR + + 4 4kΩ � Voltage Pulse • DC Powered Relay or � Voltage Pulse Counter Coil + + 7 7 + + – – LOAD Spark Quenching Diode 1 8 8 – – 2 – +12V PWR + + 4 Specifications are subject to change without notice. http://www.m-system.co.jp/ W2PP SPECIFICATIONS ES-5534 Rev.5 Page 4/4