M5TS - M-SYSTEMS - Elite.Parts

Description

M-Systems M5TS M5-UNIT Series Terminal Block Signal Conditioner; Thermocouple Transmitter

Part Number

M5TS

Price

Request Quote

Manufacturer

M-SYSTEMS

Lead Time

Request Quote

Category

TBD

Specifications

AC Power input

Approx. 2 VA at 100 V; Approx. 3 VA at 200 V; Approx. 3 VA at 264 V

Accuracy

(whichever is greater)K, E, J: ±0.1 % of FS or ±0.2°C; T, N: ±0.2 % of FS or ±0.2°C; PR, B, R, S: ±0.3 % of FS (at over 400°C for R, S and PR; over 770°C for B)

Burnout response

Less than or equal to 10 sec

Cold junction compensation

CJC sensor attached to the input terminals

Cold junction compensation error (at 20°C ±10°C or 68°F ±18°F)

K, E, J, T, N: ±0.5°C or ±0.9°F max; S, R, PR: ±1°C or ±1.8°F max

Connection

M3.5 screw terminals (torque 0.8 N•m)

Construction

Terminal block

DC Power input

Approx. 2 W

Dielectric strength (input to output to power to ground)

DC powered: 2000 V AC @1 minute; AC powered: 1500 V AC @1 minute

Housing material

Flame-resistant resin (black)

Insulation resistance:

Greater than or equal to 100 M Omega with 500 V DC

Isolation

Input to output to power

Line voltage effect

±0.1 % over voltage range

Linearization

Standard

Mounting

DIN rail

Operating humidity

0 to 90 %RH (non-condensing)

Operating temperature

-5 to +55°C (23 to 131°F)

Power LED

Green light turns on when the power is supplied

Screw terminal

Nickel-plated steel

Span adjustment

98 to 102 % (front)

Temp. Coefficient: ±0.015 %/°C (±0.008 %/°F) (at over 400°C for R, S and PR

Performance

Weight

80 g (2.8 oz)

Zero adjustment

-2 to +2 % (front)

Features

Accepts direct input from a thermocouple and provides a standard process signal
CE marking for 24 V power
Cold junction compensation
Fast response type available
High-density mounting
Linearization and burnout
Power LED

Datasheet

M5TS-1961770239.pdf

100 KiB

Download

Extracted Text

MODEL: M5TS Super-mini Terminal Block Signal Conditioners M5-UNIT Z: Specify current (See OUTPUT SPECIFICATIONS) Voltage 1: 0 – 10 mV DC (Load resistance 100 kΩ min.) THERMOCOUPLE TRANSMITTER (CE not available) 2: 0 – 100 mV DC (Load resistance 100 kΩ min.) Functions & Features (CE not available) • Accepts direct input from a thermocouple and provides a 3: 0 – 1 V DC (Load resistance 100 Ω min.) standard process signal 4: 0 – 10 V DC (Load resistance 1000 Ω min.) • Linearization and burnout 5: 0 – 5 V DC (Load resistance 500 Ω min.) • Cold junction compensation 6: 1 – 5 V DC (Load resistance 500 Ω min.) • Fast response type available 1W: -10 – +10 mV DC (Load resistance 100 kΩ min.) • High-density mounting (CE not available) • Power LED 2W: -100 – +100 mV DC (Load resistance 100 kΩ min.) • CE marking for 24 V power (CE not available) 25 (.98) 3W: -1 – +1 V DC (Load resistance 800 Ω min.) 4W: -10 – +10 V DC (Load resistance 8000 Ω min.) 5W: -5 – +5 V DC (Load resistance 4000 Ω min.) 97 0: Specify voltage (See OUTPUT SPECIFICATIONS) (3.82) 01: Specify voltage (See OUTPUT SPECIFICATIONS) (CE not available) 41 (1.61) mm (inch) [3] POWER INPUT AC Power M5TS-❑❑-❑❑ M: 85 – 264 V AC (Operational voltage range 85 – 264 V, 47 –66 Hz) (CE not available) ORDERING INFORMATION DC Power Specify a code from below for each [1] through [4]. R: 24 V DC • Code number: M5TS-[1][2]-[3][4] (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) (e.g. M5TS-2A-R/K/BL/Q) Specify variables. • Temperature range (e.g. 0 – 800°C) [4] OPTIONS (multiple selections) • Special output range (For codes Z & 0) RESPONSE TIME (0 – 90 %) • Specify the specification for option code /Q blank: Standard (≤ 0.5 sec.) (e.g. /C01 /V01) /K: Fast Response (Approx. 25 msec.) BURNOUT blank: Upscale burnout [1] INPUT THERMOCOUPLE /BL: Downscale burnout 1: (PR) (Usable Range 0 to 1760°C, 32 to 3200°F) /BN: No burnout 2: K (CA) (Usable range -270 to +1370°C, -454 to +2498°F) OTHER OPTIONS 3: E (CRC) (Usable range -270 to +1000°C, -454 to +1832°F) blank: none 4: J (IC) (Usable range -210 to +1200°C, -346 to +2192°F) /Q: Option other than the above (specify the specification) 5: T (CC) (Usable range -270 to +400°C, -454 to +752°F) 6: B (RH) (Usable range 0 to 1820°C, 32 to 3308°F) OPTION SPECIFICATIONS OF /Q (multiple selections) 7: R (Usable range -50 to +1760°C, -58 to +3200°F) COATING (For the detail, refer to M-system's web site.) 8: S (Usable range -50 to +1760°C, -58 to +3200°F) /C01: Silicone coating N: N (Usable range -270 to +1300°C, -454 to +2372°F) /C02: Polyurethane coating 0: Specify /C03: Rubber coating ADJUSTMENT [2] OUTPUT /V01: Multi-turn fine adjuster Current A: 4 – 20 mA DC (Load resistance 550 Ω max.) D: 0 – 20 mA DC (Load resistance 550 Ω max.) http://www.m-system.co.jp/ M5TS SPECIFICATIONS ES-2462 Rev.8 Page 1/4 MODEL: M5TS • DC Voltage GENERAL SPECIFICATIONS Output code 0 (CE) Construction: Terminal block Voltage range: -10 – +10 V DC Connection: M3.5 screw terminals (torque 0.8 N·m) Minimum span: 1 V Screw terminal: Nickel-plated steel Offset: Max. 1.5 times span Housing material: Flame-resistant resin (black) Load resistance: Output drive 10 mA max.; at ≥1 V Isolation: Input to output to power Max. 1.25 mA output drive for negative voltage Zero adjustment: -2 to +2 % (front) Output code 01 (Not CE) Span adjustment: 98 to 102 % (front) Voltage range: -1 – +1 V DC Linearization: Standard Minimum span: 10 mV Cold junction compensation: CJC sensor attached to the Offset: Max. 1.5 times span input terminals Load resistance: Min. 100 kΩ Power LED: Green light turns on when the power is supplied. Min. 1 MΩ for negative voltage INPUT SPECIFICATIONS INSTALLATION Minimum span: 3 mV Power Consumption Input resistance: 20 kΩ min. •AC Power input: Burnout sensing: 0.1 μA Approx. 2 VA at 100 V Approx. 3 VA at 200 V Lower temperature range & span (in °C) Approx. 3 VA at 264 V (PR): Lower range 0 to 880°C; min. span 370°C •DC Power input: Approx. 2 W K (CA): Lower range -270 to +1200°C; min. span 75°C Operating temperature: -5 to +55°C (23 to 131°F) E (CRC): Lower range -270 to +750°C; min. span 50°C Operating humidity: 0 to 90 %RH (non-condensing) J (IC): Lower range -210 to +800°C; min. span 60°C Mounting: DIN rail T (CC): Lower range -270 to +325°C; min. span 75°C Weight: 80 g (2.8 oz) B (RH): Lower range 0 to 750°C; min. span 780°C R: Lower range -50 to +550°C; min. span 360°C S: Lower range -50 to +550°C; min. span 380°C PERFORMANCE in percentage of span N: Lower range -270 to +1100°C; min. span 110°C Accuracy (whichever is greater) K, E, J: ±0.1 % of FS or ±0.2°C Lower temperature range & span (in °F) T, N: ±0.2 % of FS or ±0.2°C (PR): Lower range 32 to 1616°F; min. span 670°F PR, B, R, S: ±0.3 % of FS K (CA): Lower range -454 to +2192°F; min. span 140°F (at over 400°C for R, S and PR; over 770°C for B) E (CRC): Lower range -454 to +1382°F; min. span 90°F Cold junction compensation error J (IC): Lower range -346 to +1472°F; min. span 110°F (at 20°C ±10°C or 68°F ±18°F) T (CC): Lower range -454 to +617°F; min. span 140°F K, E, J, T, N: ±0.5°C or ±0.9°F max. B (RH): Lower range 32 to 1382°F; min. span 1450°F S, R, PR: ±1°C or ±1.8°F max. R: Lower range -58 to +1022°F; min. span 680°F Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) S: Lower range -58 to +1022°F; min. span 700°F (at over 400°C for R, S and PR; over 770°C for B) N: Lower range -454 to +2012°F; min. span 200°F Burnout response: ≤ 10 sec. Line voltage effect: ±0.1 % over voltage range Note 1: The described accuracy may be partially not Insulation resistance: ≥ 100 MΩ with 500 V DC satisfied when the temperature ranges below 0°C. Consult Dielectric strength (input to output to power to ground) M-System. DC powered: 2000 V AC @1 minute Note 2: Consult M-System for the range out of the above AC powered: 1500 V AC @1 minute list. STANDARDS & APPROVALS OUTPUT SPECIFICATIONS CE conformity: • DC Current: 0 – 20 mA DC EMC Directive (2004/108/EC) Minimum span: 1 mA EN 61000-6-4 (EMI) Offset: Max. 1.5 times span EN 61000-6-2 (EMS) Load resistance: Output drive 11 V max. http://www.m-system.co.jp/ M5TS SPECIFICATIONS ES-2462 Rev.8 Page 2/4 MODEL: M5TS FRONT VIEW 1 2 Power LED 3 4 Span Adj. Zero Adj. 5 6 7 8 DIMENSIONS unit: mm (inch) 7.3 (.29) 8–M3.5 SCREW 1 2 DIN RAIL 3 4 35mm wide 5 6 7 8 25 (.98) 41 (1.61) [3.3 (.13)] • When mounting, no extra space is needed between units. TERMINAL ASSIGNMENTS unit: mm (inch) CJC Sensor 1 2 3 4 5 6 7 8 http://www.m-system.co.jp/ M5TS SPECIFICATIONS ES-2462 Rev.8 Page 3/4 3 (.12) 94 (3.70) 16 16 (.63) 35.4 (1.39) MODEL: M5TS SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM Burnout comp. leadwire Z S Isolation T/C + Low Drift Output + 3 Linearizer Amplifier 5 + Amplifier Driver OUTPUT – 6 – metal leg – POWER LED 4 CJC 7 U(+) * Cold Junction SENSOR POWER 2 Compensation 8 V(–) model: CJM 1 *Deleted with B thermocouple Specifications are subject to change without notice. http://www.m-system.co.jp/ M5TS SPECIFICATIONS ES-2462 Rev.8 Page 4/4

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products