Manufacturers
M-SYSTEMS M5PA
Description
M-Systems M5PA M5-UNIT Series Terminal Block Signal Conditioner; Frequency Transmitter
Part Number
M5PA
Price
Request Quote
Manufacturer
M-SYSTEMS
Lead Time
Request Quote
Category
TBD
Specifications
Accuracy
±0.1 %
Chattering protection
Filter provided for mechanical contact input
Connection
M3.5 screw terminals (torque 0.8 N•m)
Construction
Terminal block
Dielectric strength (input to output to power to ground)
DC powered: 2000 V AC @1 minute; AC powered: 1500 V AC @1 minute
Housing material
Flame-resistant resin (black)
Insulation resistance
Greater than or equal to 100 M Omega with 500 V DC
Isolation
Input to output to power
Line voltage effect
±0.1 % over voltage range
Mounting
DIN rail
Operating humidity
0 to 90 %RH (non-condensing)
Operating temperature
-5 to +55°C (23 to 131°F)
Power Consumption AC: Approx. 2 VA at 100 V; Approx. 3 VA at 200 V; Approx.
Installation
Power Consumption DC
Approx. 2 W
Power LED
Green light turns on when the power is supplied.
Response time
Max. 0.5 sec. + 1 pulse cycle (0 – 90 %)
Screw terminal
Nickel-plated steel
Span adjustment
98 to 102 % (front)
Temp. coefficient
±0.015 %/°C (±0.008 %/°F)
Weight
80 g (2.8 oz)
Zero adjustment
-2 to +2 % (front)
Features
- 2000V AC isolation (1500V AC for AC powered)
- CE marking for 24 V DC power
- Converts the output from a pulse-type transducer into a standard process signal
- High-density mounting
- Only 41 mm (1.61 in") deep modules can be installed anywhere, even behind the panel cover
- Power Indicator LED
- Power indicator LED
- Selectable power input 24V DC, 85–264V AC
- Standard DIN rail mounting
- The M5 Series features single channel four-wire models
Datasheet
Extracted Text
MODEL: M5PA Super-mini Terminal Block Signal Conditioners M5-UNIT [3] POWER INPUT AC Power M: 85 – 264 V AC (Operational voltage range 85 – 264 V, FREQUENCY TRANSMITTER 47 –66 Hz) Functions & Features (CE not available) • Converts the output from a pulse-type transducer into a DC Power standard process signal R: 24 V DC • High-density mounting (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) • Power LED • CE marking for 24 V DC power [4] OPTIONS 25 (.98) blank: none /Q: With options (specify the specification) 97 SPECIFICATIONS OF OPTION: Q (3.82) COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating 41 (1.61) mm (inch) /C03: Rubber coating MODEL: M5PA-[1][2]-[3][4] GENERAL SPECIFICATIONS Construction: Terminal block Connection: M3.5 screw terminals (torque 0.8 N·m) ORDERING INFORMATION Screw terminal: Nickel-plated steel Specify a code from below for each [1] through [4]. Housing material: Flame-resistant resin (black) • Code number: M5PA-[1][2]-[3][4] Isolation: Input to output to power (e.g. M5PA-CA-R/Q) Zero adjustment: -2 to +2 % (front) Specify variables. Span adjustment: 98 to 102 % (front) • Frequency range (e.g. 0 – 1 kHz) Chattering protection: Filter provided for mechanical • Special output range (For codes Z & 0) contact input • Specify the specification for option code /Q Power LED: Green light turns on when the power is supplied. (e.g. /C01) INPUT SPECIFICATIONS [1] INPUT ■ Open Collector A1: Open collector Frequency range: 0 – 0.01 Hz through 100 kHz A2: Mechanical contact Pulse width time requirement: ≥ 4 µsec. for both ON and C: 5 V pulse (sensitivity 2 V) OFF D: 12 V/24 V pulse (sensitivity 5 V) Sensing voltage/current: 5 V DC @2 mA Detecting levels: ≤ 0.7 V / 350 Ω for ON; ≥ 4 V / 10 kΩ for [2] OUTPUT OFF Current ■ Mechanical Contact A: 4 – 20 mA DC (Load resistance 550 Ω max.) Frequency range: 0 – 0.01 Hz through 30 Hz Z: Specify current (See OUTPUT SPECIFICATIONS) Pulse width time requirement: ≥ 10 msec. for both ON and Voltage OFF 4: 0 – 10 V DC (Load resistance 1000 Ω min.) Sensing voltage/current: 5 V DC @2 mA 5: 0 – 5 V DC (Load resistance 500 Ω min.) Detecting levels: ≤ 0.7 V / 350 Ω for ON; ≥ 4 V / 10 kΩ for 6: 1 – 5 V DC (Load resistance 500 Ω min.) OFF 4W: -10 – +10 V DC (Load resistance 8000 Ω min.) ■ Voltage Pulse 5W: -5 – +5 V DC (Load resistance 4000 Ω min.) Frequency range: 0 – 0.01 Hz through 100 kHz 0: Specify voltage (See OUTPUT SPECIFICATIONS) Pulse width time requirement: ≥ 4 µsec. for both H and L levels http://www.m-system.co.jp/ M5PA SPECIFICATIONS ES-2483 Rev.7 Page 1/4 MODEL: M5PA Waveform: Square or sine Input impedance: ≥ 10 kΩ Max. voltage between input terminals: ±50 V Detecting H level 5 V pulse: ≥ 3 V 12 V, 24 V pulse: ≥ 6 V Detecting L level 5 V pulse: ≤ 1 V 12 V, 24 V pulse: ≤ 4 V OUTPUT SPECIFICATIONS ■ DC Current: 0 – 20 mA DC Minimum span: 1 mA Offset: Max. 1.5 times span Load resistance: Output drive 11 V max. ■ DC Voltage: 0 – 10 V DC Minimum span: 1 V Offset: Max. 1.5 times span Load resistance: Output drive 10 mA max.; at ≥ 1 V INSTALLATION Power Consumption •AC: Approx. 2 VA at 100 V Approx. 3 VA at 200 V Approx. 3 VA at 264 V •DC: Approx. 2 W Operating temperature: -5 to +55°C (23 to 131°F) Operating humidity: 0 to 90 %RH (non-condensing) Mounting: DIN rail Weight: 80 g (2.8 oz) PERFORMANCE in percentage of span Accuracy: ±0.1 % Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) Response time: Max. 0.5 sec. + 1 pulse cycle (0 – 90 %) Line voltage effect: ±0.1 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength (input to output to power to ground) DC powered: 2000 V AC @1 minute AC powered: 1500 V AC @1 minute STANDARDS & APPROVALS CE conformity: EMC Directive (2004/108/EC) EMI EN 61000-6-4: 2007 EMS EN 61000-6-2: 2005 http://www.m-system.co.jp/ M5PA SPECIFICATIONS ES-2483 Rev.7 Page 2/4 MODEL: M5PA FRONT VIEW 1 2 Power LED 3 4 Span Adj. Zero Adj. 5 6 7 8 DIMENSIONS unit: mm (inch) 7.3 (.29) 8–M3.5 SCREW 1 2 DIN RAIL 3 4 35mm wide 5 6 7 8 25 (.98) 41 (1.61) [3.3 (.13)] • When mounting, no extra space is needed between units. SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM Z S Isolation Waveform Digital Voltage Output + 3 5 + Shaper Computation Amplifier Driver INPUT OUTPUT – 4 6 – POWER LED 1 7 U(+) POWER 2 8 V(–) Input Connection Examples � Open Collector or Mechanical Contact � Voltage Pulse +5V 2.5kΩ + 3 + 3 – 4 – 4 http://www.m-system.co.jp/ M5PA SPECIFICATIONS ES-2483 Rev.7 Page 3/4 3 (.12) 94 (3.70) 35.4 (1.39) MODEL: M5PA Specifications are subject to change without notice. http://www.m-system.co.jp/ M5PA SPECIFICATIONS ES-2483 Rev.7 Page 4/4
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the M5PA have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods