M-SYSTEMS FFD
Features
- -40ºC to +85ºC operating temperature
- -55ºC to +95ºC storage temperature
- 128MB to 5.6GB disk capacity
- 1500G operating shock
- 16.3G RMS operating random vibration
- 2.0 MBytes/sec sustained write
- 3.0 MBytes/sec sustained read
- 3.5" standard form factor
- 80,000 feet operating altitude
- 9.7 MBytes/sec burst read/write
- Bad-block mapping-out algorithm
- DIP Switch configuration
- endurance by dynamic wear-leveling
- Enhanced 1,000,000 write/erase cycles
- Ensures data integrity under unstable power conditions
- Front panel LEDs, Power and Diagnostics, Busy/Access
- Hardware and software EDC/ECC
- MIL-STD 810F compliant
- NEBS Level 3 compliant
- No moving parts
- Quick security erase in 10 seconds
- SCSI-2 interface
- Sun MicrosystemsTM SolarisTM Ready
- TrueFFS® technology
Datasheet
Extracted Text
FFD™ 3.5" SCSI Highly Reliable, Narrow SCSI Solid-State Flash Disk Technology Overview M-Systems’ Fast Flash Disk (FFD) 3.5" SCSI disk is a state-of-the-art solid- state disk based on NAND flash technology, containing no moving parts. The outstanding performance of the FFD 3.5" SCSI is based on M-Systems’ ® TrueFFS technology that provides full disk emulation, enhanced endurance with dynamic wear-leveling and bad-block mapping-out flash management. Due to its unique design, the FFD 3.5" SCSI eliminates seek time, latency and other electro-mechanical delays inherent in conventional disk drives with a 9.7 MBytes/sec burst read/write rate. The FFD 3.5” SCSI is equipped with on-the-fly EDC/ECC implementing 48-bit Reed Solomon algorithm with DIP switch configurations and front panel LED indicators. The FFD 3.5" SCSI is fully compatible with the SCSI-2 interface, and has the same mechanical dimensions of traditional mechanical disks. It is a drop-in replacement for rotating disks where top reliability is required. Main Features 128MB to 5.6GB disk capacity Applications 3.5" standard form factor FFD 3.5" SCSI provides an ideal storage solution for mission-critical applications that must operate under harsh environmental conditions. SCSI-2 interface M-Systems' family of FFDs has been used since 1997 as mass storage solutions Front panel LEDs for data recorders, moving maps, sonar, radar, fire control systems, black boxes, Power and Diagnostics data acquisition systems, and rugged laptops and servers in air force, navy and Busy/Access army installations worldwide. DIP Switch configuration The FFD 3.5" SCSI is used in telecommunication systems within optical and 9.7 MBytes/sec burst read/write ATM switches, IP gateways, wireless base stations and core routers, providing 3.0 MBytes/sec sustained read NEBS Level 3 compliance, top reliability and a maintenance-free solution. 2.0 MBytes/sec sustained write The FFD 3.5" SCSI top reliability and high MTBF (>1,000,000 hours) enables Quick security erase in 10 seconds it to be used in Factory Automation (FA) systems, Point Of Sales (POS) ® systems, assembly and robots controllers, and within manufacturing and TrueFFS technology medical systems. Enhanced 1,000,000 write/erase cycles The FFD 3.5" SCSI provides the most reliable solution without compromising endurance by dynamic wear-leveling speed, capacity, data integrity, or portability, making it an ideal solution for Bad-block mapping-out algorithm demanding applications operating under harsh environmental condition Ensures data integrity under unstable FFD Product Line power conditions Hardware and software EDC/ECC M-Systems’ FFD product line offers complete solutions for customers who require rugged and high-performance solid-state flash disks. FFD product No moving parts offering includes IDE/ATA, Narrow SCSI and Ultra-Wide SCSI interfaces in MIL-STD 810F compliant 1.8", 2.5" and 3.5" form factors. Solutions available include: NEBS Level 3 compliant FFD 2.5" IDE TM TM Sun Microsystems Solaris Ready IDE 3000 2.5" 1500G operating shock IDE 3000 3.5" 16.3G RMS operating random vibration IDE 3000 1.8" -40ºC to +85ºC operating temperature FFD 2.5" SCSI -55ºC to +95ºC storage temperature FFD 3.5" SCSI 80,000 feet operating altitude FFD 3.5" Ultra-Wide SCSI 5-year warranty FFD 3.5" SCSI Specifications Disk Capacity Reliability Unformatted (MBytes): 128, 256, 384, 512, 640, 768, 896, MTBF: 3,717,472 hours MTBF for 128MB unit 1024, 1280, 1536, 1792, 2048, 2176, 2304, 2432, 2560, 1,667,222 hours MTBF for 1792 MB unit 2688, 2816, 3072, 3328, 3584, 3840, 4096, 4352, 4608, 1,639,882 hours MTBF for 3,584MB unit 4864, 5120, 5376, 5632 based on British-Telecom-HRD5, GB, 25°C EDC/ECC: On-the-fly hardware and software embedded SCSI Compatibility EDC/ECC based on 48-bit Reed Solomon Industry Standard SCSI-2, CCS algorithm ANSI SCSI Standard X3.131-1994 Reliability features Performance Built-in power-up self-test (BIT) Burst Read/Write: 9.7 MBytes/sec Manual and automatic self-diagnostics ® Sustained Read: 3.0 MBytes/sec TrueFFS Bad Block Mapping-out (BBM management Sustained Write: 2.0 MBytes/sec Data integrity under power-cycling Access time: <0.1ms Endurance Read unlimited Physical 1,000,000 Write/Erase cycles Form factor: 3.5" ® TrueFFS Dynamic Wear-Leveling Mounting: Industry standard Garbage collection process Dimensions (mm): 146.1(L) X 101.5(W) X 25.4(H) >10 years data retention Weight: 0.435Kg for a 5,632 MB unit User Interface & Configuration Environmental Configuration options Operating temperature SCSI ID: 0-7 Commercial: 0ºC to +70ºC Write protect: On/Off Enhanced: -25ºC to +75ºC Termination pwr: On/Off Extended: -40ºC to +85ºC Termination: On/Off Storage temperature: -55ºC to +95ºC Firmware upgrade: Field upgrade capability Humidity: 5% to 95% relative, non-condensing Electrical interface: 8-bit Interface, SE (Single-ended) Operating altitude: Up to 80,000 feet Transfer Modes: Sync (Fast)/Async Operating shock: 1,500G (half sine 0.5ms), MIL-STD- Front panel LEDs: Power and Diagnostics 810F Busy/Access Operating vibration: 16.3G RMS (random, 20Hz to Format: Factory low-level format 2000Hz; Drivers: None required 3 vibration axes), MIL-STD-810F Warranty Quick Security Erase 5 years (longer warranty period can be supported) Entire disk erase: 10 sec (typical) Customization Power PCB conformal coating Input voltage: 5VDC ±5% Customizing case dimensions Power consumption Higher disk capacities 1.0GB unit: 550mA (2.75 Watt) SCSI-I support Compliance Hardware interrupt quick security erase CE, UL, FCC Class B, MIL-STD-810F Read/write rate customization TM TM Sun Microsystems Solaris Ready Contact Us Ordering Information USA: +1-510-494-2090 FFD-350-CCCC-T Taiwan: +886-2-8770-6226 CCCC: Unformatted capacity (MB) 128 to 5632 China: +86-755-2519-4732 T: Temperature range Specifications subject to change without notice. Japan: +81-3-5423-8101 Blank – Commercial: 0°C to +70°C All rights reserved. TrueFFS® and FFD™ are Europe & Israel: N – Enhanced: -25°C to +75°C trademarks of M-Systems. +972-9-764-5000 X – Extended: -40°C to +85°C 45-SR-001-13-6L Rev. 5.0 Sep 2002 E-mail: ffd@m-sys.com Web: http://www.m-sys.com
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the FFD have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods