Contents E Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 N What’s in the Box? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 G Transit USB Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Transit USB Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 L Software Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 I Windows XP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Windows 2000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 S Windows Me . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 H Windows 98SE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 Mac OS 9.2.2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Mac OS X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 Transit USB Audio Connnections . . . . . . . . . . . . . . . . . . . . . . . . . . .23 Output Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 Input Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 Transit USB’s Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 Operating Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 Latency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 Transit USB and the Windows Media Drivers . . . . . . . . . . . . . . . . . .26 WDM/MME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 ASIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 Transit USB and Macintosh Audio . . . . . . . . . . . . . . . . . . . . . . . . . . .26 Mac OS 9.2.2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 Mac OS X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 Contact Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 Technical Features: Introduction E E • Supports the following sampling frequencies (in Hz): 8000, 9600, 11025, 12000, 16000, 22050, Thanks for choosing the Transit USB by M-Audio.Transit USB is your compact, professional N N 24000, 32000, 44100, 48000, 88200*, 96000 audio solution for any Windows or Macintosh computer*, using the convenience of USB • Supports 16 & 24-bit Linear PCM I/O, 16-bit AC-3 and 16-bit DTS output over S/PDIF connectivity – no need to disassemble your computer, no bulky external power supplies. G G TOSLink Transit USB gives you full 24 bit digital audio at sampling rates from 8 kHz to 96 kHz, with • Supports the following audio protocols:ASIO,WDM, MME, SoundManager, CoreAudio the flexibility of both analog and optical digital connectors in a lightweight form factor you L L • Unique hybrid optical/analog input jack automatically detects whether input is analog or can carry with you anywhere. optical digital I I Please take the time to read this concise Users’ Guide. It will explain how to install the • 1/8” mic input provides power for electret condenser mics S Transit USB on your computer, and tell you how to get the best performance out of your • software-controlled input and output levels, using standard Windows or MacOS S Transit USB audio interface. volume controls H H * must meet minimum system requirements * Transit USB does not support analog recording at 88200 Hz. What’s in the Box? Audio Performance Specifications: The following items are included with your Transit USB: • Input: Dynamic Range 100 dB (typical –60 dB input,A-weighted); • Transit USB audio interface Signal-to-Noise Ratio 100 dB (typical,A-weighted); THD+N –90 dB = 0.00316% (typical) • One (1) standard USB cable • One (1) TOSLink to 1/8” Optical plug adapter • Output: Dynamic Range 104 dB (typical –60 dB input,A-weighted); Signal-to-Noise • M-Audio Driver CD (includes driver installation software) Ratio 104 dB (typical,A-weighted); THD+N –94 dB = 0.00316% (typical) • Users’ Guide and Warranty Card System Requirements, Windows: Transit USB Specifications Minimum: Product and Operational Features: • Pentium II 350 MHz • 64 MB RAM • CD-ROM drive • Available USB 1.1 port • Single USB 1.1 connection for input and output • Windows 98SE, Me, 2000 (SP4) or XP (SP1) • S/PDIF 1/8” mini Optical In or 1/8” mini Analog Mic/Line In • S/PDIF optical out and 1/8” mini Analog Line Out Recommended: • Sleek, slim plastic case with blue power LED. • Pentium III 500 MHz or faster • 128 MB RAM or more • Completely USB powered (no power supply needed) • DVD-ROM drive and DVD player application (for AC-3 & DTS pass-through) • One year warranty 3 2 3. Optical/Analog Mic/Line Input Jack - This hybrid digital/analog jack accepts either analog System Requirements, Macintosh: E E input via a standard 1/8" stereo mini plug, or optical S/PDIF digital input via an included Minimum: mini-optical adapter.The input jack automatically senses whether the input is analog or N N • G3, G4*, iMac, iBook or Powerbook with native USB support digital.The analog input can also accept mic-level inputs, and provides plug-in power for • 64 MB RAM • CD-ROM drive electret condenser microphones. G G 4. Optical Digital-Output Connector - This is a standard optical S/PDIF connector for • Mac OS version 9.2.2, MacOSX version 10.1.5 or MacOSX “Jaguar” version 10.2.6 or later digital audio (sometimes called a TOSLink connector) that accepts a standard optical L L Recommended: digital cable.This port can output either PCM stereo digital audio or digitally-encoded I AC-3 or DTS pass-through. The output comes with a plastic cover that should be I • G3, G4*, iMac, iBook or Powerbook with native USB support removed and stored for use when transporting the Transit USB. • 128 MB RAM S S 5. Line-Output Jack - This 1/8" mini-jack accepts a standard stereo plug, such as those used • DVD-ROM drive for connection with portable audio devices and powered computer speakers. If you need H • MacOSX “Jaguar” version 10.2.4 or later H to connect the Transit to a home stereo system, you may obtain a cable or adapter with a 1/8” stereo plug on one end and two male RCA plugs on the other.This output also * G3 and G4 accelerator cards not supported; AC-3 & DTS pass-throughsupported only with OS X 10.3 or higher boasts an enhanced current drive for use with a pair of headphones. Transit USB Features Software Installation Your Transit USB comes with driver software that allows it to communicate with your particular computer (Mac or PC) and operating system.Please locate the section for your computer type and operating system and follow the instructions for installing the driver software. Your Transit USB comes with a standard USB cable.The squared end of the cable connects to the Transit USB; the flat end connects to your computer’s USB port. Do NOT connect the Transit USB to your computer until instructed to do so. This diagram is an illustration of your Transit USB, with descriptions and information about its physical features, which are described here. Windows XP 1. USB Connector – Connect the squared “device” end of the supplied USB cable here. 1. Place the Transit USB CD into your CD-ROM drive. Do NOT connect the Transit USB 2. Power LED – This LED lights bright blue when Transit USB receives power from your to your computer’s USB port at this time. Browse the CD content and double click the computer’s USB port.This will occur when Transit USB sees a valid USB connection to Transit USB folder.Then double click the Transit USB Icon. your computer, and the computer is powered on and the USB port enabled. 5 4 2. The M-Audio Transit USB Installer screen will appear, asking you to confirm that you 5. After the driver files have been installed, the Performance Enhancements screen appears with E E wish to install Transit USB. Click Next to continue. default settings for CD and DVD playback selected. Unless you’re certain your hardware is incompatible with these settings, it is recommended that you leave them selected . N N G G L L I I S S H 6. You will be prompted to restart your computer. Click Finish to restart. H 3. The installer will copy the Transit USB files to your computer’s hard drive. 7. On rebooting, the M-Audio Transit USB Control Panel icon will appear in the system tray. Connect the Transit USB to your computer’s USB port.Windows will now display 4. The Software Installation window may appear one or more times,warning you that the driver the Found New Hardware dialog and will open the New Hardware Wizard. software has not passed the Windows Logo testing. Click the “Continue Anyway” button. 8. Choose the selection,“Install the software automatically,” and click Next. 7 6 9. The New Hardware Wizard will write the remaining files to your system.You may once 2. The M-Audio Transit USB Installer screen will appear, asking you to confirm that you wish E E again see the warning that the driver software has not passed the Windows Logo testing; to install Transit USB. Click Next to continue. click “Continue Anyway” and allow the installation to complete. Click Finish. N N G G L L I I S S H H 3. The installer will begin to copy the Transit USB files to your computer’s hard drive. 10. After the installation is complete, you may double-click on the M-Audio Transit USB Control Panel icon to open the Transit USB Control Panel. See the section “Transit USB Control Panel” for more information on the Control Panel’s features and function. Windows 2000 It is important to make sure, when installing under Windows 2000, that you have the Service Pack 3 installed.To obtain this update, visit the Windows Updates area at www.microsoft.com. 4. The Digital Signature window will appear, warning you that the driver software does not contain a Microsoft digital signature. Click the Yes button to continue the installation. Note: Transit USB requires that you have Microsoft DirectX version 8.1 or later installed. The Transit USB installer will automatically check for the correct version of DirectX and install the latest Direct X update. This update will be skipped if you already have DirectX version 8.1 (or higher) in your system. 1. Place the Transit USB CD into your CD-ROM drive. Do NOT connect the Transit USB to your computer’s USB port at this time. Browse the CD content and double click the Transit USB folder.Then double click the Transit USB Icon. 9 8 E E N N G G L L I I 5. Once the driver files have successfully been installed, the CD Performance S S Enhancements screen will appear. By default, the performance enhancement settings for 7. On rebooting, the M-Audio Transit USB Control Panel icon will appear in the system H CD and DVD playback will be selected. It is recommended you leave them selected H tray. Connect the Transit USB to your computer’s USB port.Windows will display the unless you are certain that your hardware is incompatible with these settings. Found New Hardware dialog and will open the New Hardware Wizard. 8. Choose “Install the software automatically,” and click Next. 6. If you selected DVD performance enhancements, you will be prompted to restart your computer. Click Finish and allow your computer to restart. 9. The New Hardware Wizard will write the remaining files to your system.When the installation is complete, click Finish. 11 10 E E N N G G L L I I S S 10. After the installation is complete, you may double-click on the M-Audio Transit USB Control Panel icon to open the Transit USB Control Panel. See the section “Transit USB 3. The installer will copy the Transit USB files to your computer’s hard drive. H H Control Panel” for more information on the Control Panel’s features and function. Windows Me Note: Transit USB requires that you have Microsoft DirectX version 8.1 or later installed. The Transit USB installer will automatically check for the correct version of DirectX and install the latest Direct X update. This update will be skipped if you already have DirectX version 8.1 (or higher) in your system. 1. Place the Transit USB CD into your CD-ROM drive. Do NOT connect the Transit USB to your computer’s USB port at this time. Browse the CD content and double click the Transit USB folder.Then double click the Transit USB Icon. 4. Once the driver files have successfully been installed, the CD Performance 2. The M-Audio Transit USB Installer screen will appear, asking you to confirm that you Enhancements screen will appear. By default, the performance enhancement settings for wish to install Transit USB. Click Next to continue. CD and DVD playback will be selected. It is recommended you leave them selected unless you are certain that your hardware is incompatible with these settings. 13 12 E E N N G G L L I 9. If you are running an older version of Windows ME, you may be required to replace the I file stream.sys. Click Yes to continue. S S 5. After the driver files have been installed, you will be prompted to restart your computer. H Click Finish and your computer will reboot. H 10. After the installation is complete, you may double-click on the M-Audio Transit USB Control Panel icon to open the Transit USB Control Panel. See the section “Transit USB Control Panel” for more information on the Control Panel’s features and function. Windows 98SE 6. On rebooting, the M-Audio Transit USB Control Panel icon will appear in the system tray. Connect the Transit USB to your computer’s USB port. Note: Transit USB requires that you have Microsoft DirectX version 8.1 or later 7. The New Hardware Wizard will write the remaining files to your system. installed. The Transit USB installer will automatically check for the correct version of DirectX and install the latest Direct X update. This update will be skipped if you already have DirectX version 8.1 (or higher) in your system. 1. Place the Transit USB CD into your CD-ROM drive. Do NOT connect the Transit USB to your computer’s USB port at this time. Browse the CD content and double click the Transit USB folder.Then double click the Transit USB Icon. 8. If you are running an older version of Windows ME, you may be required to replace the 2. The M-Audio Transit USB Installer screen will appear, asking you to confirm that you wish file ksuser.dll. Click Yes to continue. 15 14 to install Transit USB. Click Next to continue. Click Finish and your computer will reboot. E E N N G G L L I I S S 3. The installer will begin to copy the Transit USB files to your computer’s hard drive. 6. On rebooting, the M-Audio Transit USB Control Panel icon will appear in the system tray. Connect the Transit USB to your computer’s USB port.Windows will display the H H Found New Hardware dialog and will open the Windows Hardware Wizard. Choose the default “Search for the best driver for your device” and click Next. 4. Once the driver files have successfully been installed, the CD Performance Enhancements screen will appear. By default, the performance enhancement settings for CD and DVD playback will be selected. It is recommended you leave them selected 7. Windows will ask you for the location of the driver, uncheck all boxes except “Specify unless you are certain that your hardware is incompatible with these settings. Location” and click "Next". 5. After the driver files have been installed, you will be prompted to restart your computer. 17 16 E E N N G G L L I I 8. Windows will ask “ What do you want to install?” Select the default “The updated driver 11. The New Hardware Wizard will write the remaining files to your system.When the (Recommended)” and click “Next”. S installation is complete, click Finish. S H H 12. After the installation is complete, you may double-click on the M-Audio Transit USB Control Panel icon to open the Transit USB Control Panel. See the section “Transit USB 9. In some cases,Windows may ask you to insert your Windows CD-ROM. If so, insert the Control Panel” for more information on the Control Panel’s features and function. CD and, using the Windows Explorer menu, navigate to your CD-Rom drive. Select Win98SE to open the folder and click "OK". Mac OS 9.2.2 1. Insert the Transit USB driver CD into your CD-ROM drive.AutoRun will open the CD and allow you to view its contents. 2. Double click on the “M-Audio Transit USB Installer” icon. 3. Click Continue in the initial installer introduction screen. 10. In some Windows will ask you to update your stream.sys file. Click “Yes” to continue. 19 18 Mac OS X E E 1. Insert the Transit USB driver CD into your CD-ROM drive and open the CD to view its contents. N N 2. Double click the M-Audio Transit USB Installer.dmg file.An icon labeled Transit USB will appear on your desktop. G G 3. Double click on the Transit USB icon.The file M-Audio Transit USB Installer.mpkg will 4. An informational screen will appear next.Please read through it’s contents and click Continue. L appear. Double click on the installer file. L 4. You will need your Administrator Password for the next step.To continue, click the lock I I icon in the lower left corner of the window that states, “Click The Lock To Make Changes." In OSX version10.2.2 this authentication dialog will automatically appear. S S H H 5. For first-time installations,the default Easy Install is the desired selection..Click Install to continue. 5. Enter your password and click "OK." 6. The next window "Welcomes You..." to the installation process. Click "Continue." 6. You will be prompted to restart your computer. Click Continue. 7. When your computer has restarted, connect the Transit USB to your computer’s USB port. 8. Under Control Panels, select Sound, then select the Output tab. Click on M-Audio Transit USB to select Transit USB as your default audio device. 21 20 E E N N G G L L I I S 11. After the computer has restarted, now plug the Transit into your computer’s USB Port. S 7. Select your OS X hard drive. Click "Continue." 12. Go to "System Preferences" in the Apple Menu. Select the "Sound" preference panel, and H H click the "Output" tab. Select "M-Audio Transit USB" to choose the Transit USB as your default output device. Transit USB Audio Connnections Output Connections Your Transit USB is equipped with an analog stereo output on a 1/8” mini jack.This analog output can be connected to powered speakers, headphones or to the analog inputs of your 8 If prompted to do so, click "Upgrade" to continue. home stereo system, using a 1/8”-to-RCA adapter. 9. When prompted, click "Continue Installation." The Transit USB also has an optical digital output, sometimes referred to as a TOSLink connector.You may connect this digital output to the optical digital inputs of a home theater or stereo, CD-R or MiniDisc recorder, or any device that supports a two-channel optical digital input.When outputting a two-channel signal, the signal at Transit USB’s analog and digital outputs is identical. NOTE: If you need to connect to a device with coaxial S/PDIF inputs, you may purchase the Co2 Coaxial/Optical Bi-directional Converter from M-Audio for this purpose. This optical digital output can also transmit a multichannel encoded digital audio signal from 10. When prompted, click "Restart" to finish the installation. a Dolby Digital or DTS-equipped source.Transit USB’s digital output supports 16-bit AC-3 23 22 encoded signals. Note that when “Dolby Digital / DTS pass-through, 16-bit, 48000 Hz” is E E selected from the Transit USB Control Panel,Transit USB’s analog outputs are defeated. (See the next section for more information.) N N G Input Connections G Your Transit USB is equipped with a unique combination optical/analog input which can L L accept a standard 1/8” stereo analog input at either Mic or Line level.This input can also I accept an optical digital input, via the included TOSLink-to-mini optical adapter.Transit USB’s I input jack automatically detects whether the input is analog or digital. S S Transit USB’s input can also supply +5V bias voltage to power an electret condenser H Latency H microphone such as those supplied with some computer audio products. Latency is defined as the time it takes for your input signal to pass through your audio software and appear at the outputs. Smaller buffer sizes result in lower latency, but may not Transit USB’s Control Panel function well with slower systems.This drop-down menu selects the buffer size Transit USB uses to handle digital audio streaming. In Windows, you can open the Transit USB’s control panel by double clicking on the M-Audio icon in the system tray. On the Mac, select Control Panels under the Apple menu, and locate The default Latency setting is “Medium.” This setting may adequately serve your purposes, the Transit USB control panel selection. but if you wish to, you can experiment with lower settings. If you experience stuttering or crackling in your audio playback, try using a higher latency setting. Operating Mode In this drop down menu you can select how the Transit USB sends and/or receives audio.The following options are available: Transit USB and the Windows Media Drivers • 2-In/2-Out, 16-bit, 8000 – 48000 Hz • 2-In/2-Out, 24-bit, 8000 – 48000 Hz • 2-In/0-Out, 24-bit, 88200 – 96000 Hz • 0-In/2-Out, 24-bit, 88200 – 96000 Hz WDM/MME • Dolby Digital / DTS pass-through, 16-bit, 48000 Hz Transit USB’s Windows drivers support Windows’ native WDM/MME protocol, allowing you Note: Due to USB 1.1 bandwidth limitations and hardware constraints, sampling to use Transit USB as your Windows default audio device. If Transit USB is the only audio rates above 48000 Hz do not support full duplex (i.e., simultaneous input and device installed on your computer,Windows will select it automatically. If you have other output) mode. audio devices installed, you may need to select it as your default device: 1. Click the Start menu, then choose Settings/Control Panel 2. Open the audio properties panel. In Windows XP it’s labeled “Sounds and Audio 25 24 Devices;” in Windows 2000 and Windows ME it’s labeled “Sounds and Multimedia;” and folder (usually located within the Programs folder). Locate the program’s ASIO folder. E E in Windows 98SE it’s called “Multimedia.” Select the Audio tab. 3. Drag Transit USB’s ASIO driver files to the ASIO folder within your application’s folder. 3. Under Playback and Record, select Transit USB from the drop down list. Click Apply, then N N click Okay to close the Control Panel. Mac OS X G G ASIO The Transit USB supports MacOS X Core Audio protocol.To select the Transit USB as your L L Transit USB also supports Steinberg’s ASIO protocol, used in applications such as Cubase, system’s audio device: Reason, Live, Logic and other programs.Transit USB’s ASIO drivers are automatically installed. I I 1. Under the Apple menu, select System Preferences / Sound If you have other audio devices installed in your computer, you may need to select Transit 2. Select Transit USB under input and output tabs to choose the Transit USB as your default USB as the ASIO device in your audio software. Refer to the instructions in your audio S S audio device. software for details. H H Transit USB and Macintosh Audio Mac OS 9.2.2 Transit USB supports Apple’s Sound Manager protocol under OS 9.To select the Transit USB as your system’s audio device: 1. Under the Apple menu, select Control Panel / Sound. 2. Under the Output menu, select Transit USB from the list of available devices. Close the control panel. ASIO Drivers: Contact Information Transit USB also supports Steinberg’s ASIO protocol under OS 9, used in applications such For additional help, contact Midiman/M-Audio Technical Support by telephone (626-445- as Cubase, Reason, Live, Logic and Digital Performer 3. In order to use Transit USB’s ASIO 8495, 9-5 PST M-F), by fax (626-445-7564) or by e-mail (techsupt@m-audio.com). drivers with your DAW application, you will need to copy the drivers into your program’s ASIO folder. 1. Transit USB’s driver installer will create an ASIO folder on your desktop. Double click on it to open it. 2. Double click on your computer’s hard disk icon and browse to your audio software’s 27 26 Warranty Information M-AUDIO U.S. M-AUDIO U.K. E E 45 E. Saint Joseph St. Unit 5, Saracen Industrial Estate Arcadia, CA 91006-2861 Mark Rd. M-AUDIO warrants this product, under normal use, to be free of defects in materials and workmanship U.S.A. Hemel Hempstead, Herts HP2 7BJ N N for a period of One (1) Year from date of purchase, so long as: the product is owned by the original England purchaser, with proof of purchase from an authorized M-AUDIO dealer and, the product has been G Sales Information: 626-445-2842 Sales Information: 44 (0) 144 241 6590 G registered to the original purchaser, the purchaser having returned to M-AUDIO the completed product Sales Information (email): info@m-audio.com Sales Information (email): info@maudio.co.uk Tech Support: 626-445-8495 Technical Support: 44 (0) 871 717 7102 warranty card.This warranty explicitly excludes power supplies and included cables which may become L L Tech Support (email): techsupt@m-audio.com Tech Support (email): richard@maudio.freeserve.co.uk defective as a result of normal wear and tear. Fax: 626-445-7564 Fax: 44 (0) 144 224 6832 Internet Home Page: http://www.m-audio.com Internet Home Page: http://www.maudio.co.uk I I In the event that M-AUDIO receives, from an original purchaser and within the warranty coverage period, S S written notice of defects in materials or workmanship, M-AUDIO will either replace the product, repair M-AUDIO Canada M-AUDIO France the product, or refund the purchase price at its option. In the event repair is required, shipment to and H 1400 St-Jean Baptiste Ave., #150 Unit 5, Saracen Industrial Estate H from M-AUDIO and possible nominal handling charges shall be born by the purchaser. In the event that Quebec City, QC G2E 5B7 Mark Rd. Canada Hemel Hempstead, Herts HP2 7BJ repair is required, a Return Authorization number must be obtained from M-AUDIO.After this number is England obtained, the unit should be shipped back to M-AUDIO in a protective package with a description of the Tel: 418-872-0444 Sales Information: 0810 001 105 problem and the Return Authorization clearly written on the package. Fax: 418-872-0034 Sales Information (email): info@m-audio-france.com Email: midimancanada@m-audio.com Technical Support: 0820 00 731 Internet Home Page: http://www.m-audio.ca Tech Support (email): support@m-audio-france.com In the event that M-AUDIO determines that the product requires repair because of user misuse or regular Fax: 44 (0) 144 224 6832 wear, it will assess a fair repair or replacement fee.The customer will have the option to pay this fee and Internet Home Page: http://www.maudio.co.uk have the unit repaired and returned, or not pay this fee and have the unit returned un-repaired. The remedy for breach of this limited warranty shall not include any other damages. M-AUDIO will not M-AUDIO Deutschland (Germany) M-AUDIO Japan Kuhallmand 34 Annex Buliding 6F be liable for consequential, special, indirect, or similar damages or claims including loss of profit or any D-74613 Ohringen 2-18-10 Marunouchi other commercial damage, even if its agents have been advised of the possibility of such damages, and in Germany Naka-Ku, Nagoya 460-0002 Japan no event will M-AUDIO's liability for any damages to the purchaser or any other person exceed the price paid for the product, regardless of any form of the claim. M-AUDIO specifically disclaims all other Sales Information: 49 7941 98 7000 Tel: 81 52 218 3375 Sales Information (email): info@m-audio.de Fax: 81 52 218 0875 warranties, expressed or implied. Specifically, M-AUDIO makes no warranty that the product is fit for any Technical Support: 49 7941 98 70030 Technical Support: 0820 00 731 particular purpose.This warranty shall be construed, interpreted, and governed by the laws of the state of Technical Support (email): support@m-audio.de Email: info@m-audio.co.jp California. If any provision of this warranty is found void, invalid or unenforceable, it will not affect the validity of the balance of the warranty, which shall remain valid and enforceable according to its terms. In the event any remedy hereunder is determined to have failed of its essential purpose, all limitations of liability and exclusion. 29 28