® Ledex Low Profile 100.0 Linear Solenoids (444.8) 10% Duty Cycle 320W 25% Duty Cycle 128W 80.0 50% Duty Cycle 64W (355.9) 100% Duty Cycle 32W 60.0 (266.9) 40.0 (177.9) 20.0 (89.0) 0 0.100 0.200 0.300 0.400 0.500 0.600 (2.54) (5.08) (7.62) (10.16) (12.70) (15.24) Stroke - in (mm) Force - lb (newtons) ® Ledex Low Profile Solenoids ■ Linear actuation ■ Space-saving, low-profile configuration ■ Ideal for high force, short stroke applications ■ Forces to 190 lbs. ■ Stroke lengths to 0.7 inches All catalog products manufactured after April 1, 006 are RoHS Compliant The low profile shape, While some of the force Conical Face vs. Flat Applications besides contributing to component is lost because The reliability and high Face Plunger Design smaller size, optimizes the force vector is not performance of Low Conical-faced designs the magnetic flux paths parallel with the plunger Profile solenoids make extend the useful range for maximum force versus motion, the shorter gap them an ideal choice for of a solenoid to provide stroke characteristics. and higher flux density applications in which higher forces for strokes The construction of the combine to provide more consistent, reliable typically over 0.060 inches. plunger assembly provides output force for longer operation is critical. The pole surface area is an auxiliary flux path strokes. • Pumps greater and the distance which permits a significant For shorter strokes, the • Machine tools between the tapered cone increase in force. The magnetic flux density • Packaging machines faces is approximately low profile solenoid increases and causes the • Cranes one-half that of the gap construction not only iron to saturate rapidly as • Instruments between the land faces provides long life, but also the poles move closer, thus • Flow controls (for 30° angles), providing provides a rugged design reducing the efficiency of • Trucks and buses the effect of a closer air for both military and the conical-faced design. • Computer peripherals gap. commercial applications. At this point, the flat-faced plunger is more efficient. The main advantage of Flat Face: Higher efficiency for Conical Face: Higher force for the flat-faced pole over shorter strokes longer strokes the conical is that the full component of force is usable because the force vector is parallel with the pole motion. De-Energized Energized De-Energized Energized ® Ledex Solenoids G www.ledex.com 1.937.454.345 Fax: 1.937.898.864 LINEAR Low Profile LINEAR Low Profile ® Ledex Low Profile Solenoids Why Low Profile Performance Curves Typical Examples of Custom Features The performance curves solenoids provide such Even though many solenoid designs are in stock, our in this section serve as high force and rapid customers often require a product with unique features guides to determine the response. or performance capabilities. So, if you don’t find what solenoid size needed to A key to the efficiency produce a desired force you’re looking for in the catalog, give us a call to discuss at a given stroke, duty and compact form factor your needs with one of our application engineers. cycle, and power source. of the low profile solenoid Termination Plunger Retainer Power Take Off (to limit stroke) All curves were developed is our special precision Axial under the following standard stroke coil-winding process. With test conditions: ambient maximum copper packed temperature of 20°C, 65% into the allowable space, relative humidity. each solenoid develops Clevis-grooved/cross hole Elliptical Glass bead terminals Riveted retainer for tremendous force for its Starting Force (base) armature end shaft extension size and power input. The Axial When determining stroke low profile form, in addition an application’s force to contributing to smaller requirement, apply a 1.5 size, permits maximum safety factor. For example: a Clevis-tongue Flatted pole face surface area for load requiring 4.5 lb of force Truarc retainer for Stranded leads should utilize a solenoid the magnetic flux. base shaft extension (base) providing 4.5 x 1.5 or 6.75 lb Another factor that Mounting of force. contributes to high efficiency is the additional Notched Drilled hole Duty Cycle iron surface on the external Duty cycle is determined portion of the plunger; by: ON time/(ON + OFF Stranded leads it provides an auxiliary Plate mounting time). flux path and a significant For example: a solenoid is increase in force. Tapped hole Threaded rod actuated for 30 seconds, then The force is also affected off for 90 seconds. by other interrelated 30 sec ON / (30 Sec ON + 90 Solder terminals features, such as the sec OFF) = 30/120 = length of the iron path, 1/4 or 25% duty cycle. Foot mounting Ledex Low Profile the magnetic saturation Life Power Requirements solenoids are rated for properties of the solenoid When selecting a Low Voltage applied to the various duty cycles ranging case and plunger, and the Profile solenoid, as with solenoid must be matched from continuous to 10% duty. area and shape of the pole any other solenoid style, to the coil wire size for Note that maximum pieces. it is important to consider proper operation. Solenoids ON time for a particular The enclosed factors that will affect are cataloged in coil awgs application can be a factor construction of the the life of the unit. Heat, ranging from #23 up to which overrides the duty solenoid not only provides side-loading, stroke and #38 to accommodate cycle rating. For example, an iron path with operating environment all your input power. at 25% duty cycle, the minimum losses at the play an important role in Refer to the individual maximum ON time for a determining the life you can model specification ring gap, but also provides given Ledex solenoid is 36 expect in your application. pages for coil wire awg seconds. If, however, the a rugged design for critical A simple, yet often recommendations. Many solenoid is operated at a environment applications overlooked method to other coil awg sizes are cycle rate which enables the improve Low Profile available. Please feel free unit to return to ambient solenoid life is to minimize to contact our application temperature between ON the side load. Maximum engineering department cycles, then the maximum life can be achieved by for availability. ON time is extended mounting Low Profile somewhat. In the above solenoids so that the shaft example, this extended travels along a vertical ON time is 44 seconds. plane. Keeping the stroke Maximum ON time ratings as short as possible will also are listed on the individual improve life. model specification pages. ® Ledex Solenoids G3 www.ledex.com 1.937.454.345 Fax: 1.937.898.864 ® Ledex Low Profile Selection Low Profile solenoids All catalog products manufactured after are available in nine April 1, 006 are RoHS Compliant sizes. Use the selection chart to determine Low Profile Selection Overview which size offers the Package Max Nominal Force (lbs) @ Nominal Stroke desired performance and Dimensions Stroke Stroke at Specified Duty Cycle @ 0°C mechanical specifications. Size* Dia. Length (in) (in) 100% 50% 5% 10% Refer to the individual size OEC 0.750 0.500 0.150 0.060 0.19 0.44 0.94 .06 specification pages for 1EC 1.000 0.530 0.40 0.080 0.5 0.50 1.5 3.0 complete performance and EF 1.15 0.580 0.075 0.030 .00 3.50 7.00 13.50 mechanical data. EC 1.15 0.580 0.40 0.100 0.5 1.00 .00 3.75 3EF 1.31 0.690 0.075 0.040 .50 5.00 11.00 0.00 3EC 1.31 0.690 0.300 0.10 0.80 .00 3.80 5.60 4EF 1.56 0.835 0.10 0.060 3.00 6.50 1.00 5.00 4EC 1.56 0.835 0.50 0.150 1.00 .5 5.50 11.50 Well-suited for battery 5SF 1.875 0.880 0.140 0.080 3.00 9.50 17.00 39.00 operation. 5EC 1.875 1.035 0.400 0.00 .50 5.00 10.00 1.00 6SF .50 1.145 0.180 0.080 10.00 0.00 40.00 80.00 See the "Battery Operated Solenoids" section for 6EC .50 1.330 0.400 0.00 6.00 13.00 4.00 43.00 complete information. 7EC .750 1.780 0.700 0.300 9.00 18.00 33.00 54.00 8EC 3.375 .165 0.700 0.300 7.00 5.00 90.00 145.00 All data is at 20°C coil temperature. Force outputs degrade with elevated temperatures. * EC sizes have conical face plungers, EF and SF sizes have flat face plungers. How to Use Low Profile Performance Charts Performance Maximum Duty Cycle 100% 50% 5% 10% 1. Select one of the four columns which provides the Maximum ON Time (sec) ∞ 100 36 7 appropriate duty cycle. (For example 50%.) when pulsed continuously Maximum ON Time (sec) ∞ 16 44 8 . Reading down this column provides a variety of for single pulse performance and electrical data including maximum Watts (@ 0°C) 4.5 9 18 45 on time, watts, and amp turns. Ampere Turns (@ 0°C) 8.5 403 570 901 3. Following down the column further into the VDC Coil Data ratings, select the voltage which most closely matches awg Resistance # VDC VDC VDC VDC your supply voltage. (For example, 8.9 for a 9 VDC (0XX) (@0°C) Turns (Nom) (Nom) (Nom) (Nom) power supply.) 6 0.50 90 1.6 .3 3. 5.1 7 0.97 136 .0 .8 3.9 6.3 4. Read across (to the left) to select the awg suffix 8 1.33 15 .6 3.7 5.1 8.1 to complete the part number when ordering. (In this 9 .40 15 3. 4.4 6. 9.9 example using our 0EC chart, 3 awg is required, thus 30 3.9 40 4.1 5.7 8.0 1.7 to order, specify: 174534-03. 31 5.61 34 5.0 7.1 9.9 15.8 3 9.09 40 6.3 8.9 1.4 19.7 33 14.95 544 8.0 11.3 15.7 5.0 34 4.06 684 10. 14.4 0.0 3.0 35 37.10 840 1.8 18.1 5.0 40.0 36 58.51 1056 16.1 3.0 3.0 50.0 37 78.70 1109 19.8 8.0 39.0 6.0 38 13.00 1370 5.0 35.0 49.0 78.0 Force values for reference only. All specifications subject to change without notice. ® Ledex Solenoids G4 www.ledex.com 1.937.454.345 Fax: 1.937.898.864 LINEAR Low Profile LINEAR Low Profile ® Ledex Low Profile Size 0EC — Push or Pull Medium Stroke, Conical Face All catalog products manufactured after Part Number: 174534-0XX April 1, 006 are RoHS Compliant Performance Specifications Dielectric Strength 1000 VRMS Maximum Duty Cycle 100% 50% 5% 10% Recommended Maximum watts dissipated by Maximum ON Time (sec) ∞ 100 36 7 Minimum Heat Sink solenoid are based on an unrestricted 1 when pulsed continuously flow of air at 0°C, with solenoid Maximum ON Time (sec) ∞ 16 44 8 mounted on the equivalent of an  for single pulse aluminum plate measuring ” square 1 by ⁄ ” thick 8 Watts (@ 0°C) 4.5 9 18 45 Coil Resistance ±10% tolerance on all coil awg sizes Ampere Turns (@ 0°C) 85 403 570 901 Weight 0.875 oz (4.8 gms) Coil Data Holding Force 1.7 lb (7.6 N) @ 105°C awg Resistance # VDC VDC VDC VDC Dimensions Ø0.750" x 0.500" L (See page G16) 3 4 (0XX) (@0°C) Turns (Nom) (Nom) (Nom) (Nom) 6 0.50 90 1.6 .3 3. 5.1 7 0.97 136 .0 .8 3.9 6.3 8 1.33 15 .6 3.7 5.1 8.1 9 .40 15 3. 4.4 6. 9.9 How to Order 30 3.9 40 4.1 5.7 8.0 1.7 31 5.61 34 5.0 7.1 9.9 15.8 Add the coil awg number (0XX) to the part number 3 9.09 40 6.3 8.9 1.4 19.7 (for example: to order a 25% duty cycle unit rated at 3.2 33 14.95 544 8.0 11.3 15.7 5.0 VDC, specify 174534-026). 34 4.06 684 10. 14.4 0.0 3.0 Please see www.ledex.com (click on Stock Products 35 37.10 840 1.8 18.1 5.0 40.0 tab) for our list of stock products available through our 36 58.51 1056 16.1 3.0 3.0 50.0 North American distributors. 37 78.70 1109 19.8 8.0 39.0 6.0 38 13.00 1370 5.0 35.0 49.0 78.0 1 Continuously pulsed at stated watts and duty cycle Well-suited for battery operation.  Single pulse at stated watts (with coil at ambient room See the "Battery Operated Solenoids" section for temperature 0°C) complete information. 3 Other coil awg sizes available — please consult factory 4 Reference number of turns Size OEC — Typical Force @ 0°C Size OEC — Typical Speed @ No Load, 0°C 5.0 40 (22.2) 100% Duty Cycle 4.5W 10% Duty Cycle 45W 50% Duty Cycle 9W 25% Duty Cycle 18W 25% Duty Cycle 18W 4.0 50% Duty Cycle 9W 10% Duty Cycle 45W 32 (17.8) 100% Duty Cycle 4.5W 3.0 24 (13.4) 2.0 16 (8.9) 1.0 8 (4.5) 0 0.020 0.040 0.060 0.080 0.100 0.120 0.140 0 0.040 0.080 0.120 0.160 0.200 (0.51) (1.02) (1.52) (2.03) (2.54) (3.05) (3.56) (1.02) (2.03) (3.05) (4.06) (5.08) Stroke - in (mm) Stroke - in (mm) Force values for reference only. All specifications subject to change without notice. ® Ledex Solenoids G5 www.ledex.com 1.937.454.345 Fax: 1.937.898.864 Force - lb (newtons) Time - ms ® Ledex Low Profile Size 1EC — Push or Pull Size 1EC Medium Stroke, Conical Face All catalog products manufactured after Part Number: 1341-0XX April 1, 006 are RoHS Compliant Specifications Dielectric Strength 1000 VRMS Performance Recommended Maximum watts dissipated by Minimum Heat Sink solenoid are based on an unrestricted Maximum Duty Cycle 100% 50% 5% 10% flow of air at 0°C, with solenoid Maximum ON Time (sec) ∞ 100 36 7 mounted on the equivalent of an 1 when pulsed continuously aluminum plate measuring 3” square 1 by ⁄ ” thick Maximum ON Time (sec) ∞ 16 44 8 8  for single pulse Coil Resistance 5-35 awg, ±5%; 36 awg, ±10% Weight 1.50 oz (4.5 gms) Watts (@ 0°C) 5 10 0 50 Holding Force 5.4 lb (4.0 N) @ 105°C Ampere Turns (@ 0°C) 340 480 680 1075 Dimensions Ø1.000" x 0.530" L (See page G16) Coil Data awg Resistance # VDC VDC VDC VDC 3 4 (0XX) (@0°C) Turns (Nom) (Nom) (Nom) (Nom) How to Order 5 0.83 140 .1 .9 4.1 6.5 Add the coil awg number (0XX) to the part number 6 1.38 186 .6 3.7 5. 8. 7 1.91 10 3. 4.5 6.3 10.1 (for example: to order a 25% duty cycle unit rated at 6.3 8 3.17 73 4.1 5.7 8.1 1.8 VDC, specify 124910-027). 9 5.17 35 5.1 7. 10. 16. Please see www.ledex.com (click on Stock Products 30 8.5 441 6.5 9. 13.0 1.0 tab) for our list of stock products available through our 31 1.95 550 8. 11.6 16.4 6.0 North American distributors. 3 0.71 68 10.6 14.9 1.0 34.0 33 30.60 88 1.7 18. 6.0 41.0 34 50.95 1078 16.5 3.0 33.0 5.0 35 83.9 139 1.0 30.0 4.0 67.0 36 11.00 1500 6.0 37.0 5.0 83.0 1 Continuously pulsed at stated watts and duty cycle Well-suited for battery operation.  Single pulse at stated watts (with coil at ambient room See the "Battery Operated Solenoids" section for temperature 0°C) complete information. 3 Other coil awg sizes available — please consult factory 4 Reference number of turns Size 1EC — Typical Force @ 0°C Size 1EC– Typical Speed @ No Load, 0°C 10.0 40 (44.5) 10% Duty Cycle 50W 25% Duty Cycle 20W 8.0 50% Duty Cycle 10W 100% Duty 5W 32 (35.6) 50% Duty 10W 100% Duty Cycle 5W 25% Duty 20W 10% Duty 50W 6.0 24 (26.7) 4.0 16 (17.8) 2.0 8 (8.9) 0 0.050 0.100 0.150 0.200 0.250 0.300 0 0.080 0.160 0.240 0.320 0.400 (1.27) (2.54) (3.81) (5.08) (6.35) (7.62) (2.03) (4.06) (6.10) (8.13) (10.16) Stroke - in (mm) Stroke - in (mm) Force values for reference only. All specifications subject to change without notice. ® Ledex Solenoids G6 www.ledex.com 1.937.454.345 Fax: 1.937.898.864 LINEAR Low Profile Force - lb (newtons) Time - ms LINEAR Low Profile ® Ledex Low Profile Size 2EF/2EC — Push or Pull Size EF Short Stroke, Flat Face All catalog products manufactured after April 1, 006 are RoHS Compliant Part Number: 14911-0XX Specifications Size EC Medium Stroke, Conical Face Dielectric Strength 1000 VRMS Part Number: 134-0XX Recommended Maximum watts dissipated by Minimum Heat Sink solenoid are based on an unrestricted flow of air at 0°C, with solenoid Performance mounted on the equivalent of an 3 aluminum plate measuring 3 ⁄ ” Maximum Duty Cycle 100% 50% 5% 10% 8 1 square by ⁄ ” thick 8 Maximum ON Time (sec) ∞ 100 36 7 Coil Resistance 4-33 awg, ±5% 1 when pulsed continuously Weight .5 oz (63.8 gms) Maximum ON Time (sec) ∞ 16 44 8 Holding Force EF 1.0 lb (53.4 N) @ 105°C  for single pulse Holding Force EC 5.7 lb (5.4 N) @ 105°C Watts (@ 0°C) 7 14 8 70 Dimensions Ø1.15" x 0.580" L (See page G16) Ampere Turns (@ 0°C) 45 60 849 1350 How to Order Coil Data Add the coil awg number (0XX) to the part number awg Resistance # VDC VDC VDC VDC (for example: to order a 25% duty cycle unit rated at 9.0 3 4 (0XX) (@0°C) Turns (Nom) (Nom) (Nom) (Nom) VDC, specify 124911-027). 4 0.68 130 . 3. 4.5 7.1 Please see www.ledex.com (click on Stock Products 5 1.16 174 .8 4.0 5.7 9.0 tab) for our list of stock products available through our 6 1.96 31 3.6 5.1 7. 11.5 North American distributors. 7 3.16 96 4.5 6.4 9.0 14.4 8 5.10 378 5.7 8.1 11.5 18. Size EF and EC – Typical Speed @ No Load, 0°C 9 6.94 43 7.0 9.9 13.9 .0 40 30 11.03 530 8.8 1.5 17.7 8.0 31 16.85 649 11.0 15.6 .0 35.0 100% Duty 7W 3 8.15 858 13.9 19.8 8.0 44.0 32 50% Duty 14W 33 4.75 1036 17.5 5.0 35.0 56.0 25% Duty 28W 10% Duty 70W 1 Continuously pulsed at stated watts and duty cycle 24  Single pulse at stated watts (with coil at ambient room temperature 0°C) 16 3 Other coil awg sizes available — please consult factory 4 Reference number of turns 8 Well-suited for battery operation. See the "Battery Operated Solenoids" section for 0 0.080 0.160 0.240 0.320 0.400 (2.03) (4.06) (6.10) (8.13) (10.16) complete information. Stroke - in (mm) Size EF— Typical Force @ 0°C Size EC — Typical Force @ 0°C 40.0 10.0 (177.9) (44.5) 10% Duty Cycle 70W 10% Duty Cycle 70W 25% Duty Cycle 28W 25% Duty Cycle 28W 32.0 8.0 50% Duty Cycle 14W 50% Duty Cycle 14W 100% Duty Cycle 7W 100% Duty Cycle 7W (142.3) (35.6) 24.0 6.0 (106.8) (26.7) 16.0 4.0 (71.2) (17.8) 8.0 2.0 (35.6) (8.9) 0 0.040 0.080 0.120 0.160 0.200 0.240 0.280 0 0.010 0.020 0.030 0.040 0.050 0.060 0.070 (0.25) (0.51) (0.76) (1.02) (1.27) (1.52) (1.78) (1.02) (2.03) (3.05) (4.06) (5.08) (6.10) (7.11) Stroke - in (mm) Stroke - in (mm) Force values for reference only. All specifications subject to change without notice. ® Ledex Solenoids G7 www.ledex.com 1.937.454.345 Fax: 1.937.898.864 Force - lb (newtons) Force - lb (newtons) Time - ms ® Ledex Low Profile Size 3EF/3EC — Push or Pull Size 3EF Short Stroke, Flat Face All catalog products manufactured after Part Number: 1491-0XX April 1, 006 are RoHS Compliant Specifications Size 3EC Medium Stroke, Conical Face Dielectric Strength 3-7 awg, 1000 VRMS ; 8-33 awg, Part Number: 1343-0XX 100 VRMS Recommended Maximum watts dissipated by Minimum Heat Sink solenoid are based on an unrestricted Performance flow of air at 0°C, with solenoid Maximum Duty Cycle 100% 50% 5% 10% mounted on the equivalent of an 5 aluminum plate measuring 4 ⁄ ” 8 Maximum ON Time (sec) ∞ 100 36 8 1 square by ⁄ ” thick 1 8 when pulsed continuously Coil Resistance 3-33 awg, ±5% Maximum ON Time (sec) ∞ 16 44 9 Weight 3.75 oz (106.3 gms)  for single pulse Holding Force 3EF 6.0 lb (115.6 N) @ 105°C Watts (@ 0°C) 9 18 36 90 Holding Force 3EC 1.0 lb (53.4 N) @ 105°C Ampere Turns (@ 0°C) 535 756 1070 1690 Dimensions Ø1.31" x 0.690" L (See page G16) Coil Data How to Order awg Resistance # VDC VDC VDC VDC Add the coil awg number (0XX) to the part number 3 4 (0XX) (@0°C) Turns (Nom) (Nom) (Nom) (Nom) (for example: to order a 25% duty cycle unit rated at 13.3 3 0.70 145 .6 3.7 5. 8. VDC, specify 124912-027). 4 1.18 19 3.3 4.6 6.6 10.4 Please see www.ledex.com (click on Stock Products tab) 5 1.97 5 4. 5.9 8.4 13. for our list of stock products available through our North 6 3.6 38 5.3 7.5 10.6 16.8 American distributors. 7 5.04 405 6.7 9.4 13.3 1.0 8 8.0 510 8.4 11.9 16.8 7.0 Size 3EF and 3EC – Typical Speed @ No Load, 0°C 9 1.1 67 10.4 14.7 1.0 33.0 40 30 19.0 780 13. 18.6 6.0 4.0 31 31.84 1008 16.9 4.0 34.0 53.0 100% Duty 9W 3 46.97 115 1.0 9.0 41.0 65.0 32 50% Duty 18W 33 75.30 1530 6.0 37.0 53.0 83.0 25% Duty 36W 10% Duty 90W 1 Continuously pulsed at stated watts and duty cycle 24  Single pulse at stated watts (with coil at ambient room temperature 0°C) 16 3 Other coil awg sizes available — please consult factory 4 Reference number of turns 8 0 0.080 0.160 0.240 0.320 0.400 (2.03) (4.06) (6.10) (8.13) (10.16) Stroke - in (mm) Size 3EF— Typical Force @ 0°C Size 3EC— Typical Force @ 0°C 40.0 20.0 (177.9) (89.0) 10% Duty Cycle 90W 10% Duty Cycle 90W 25% Duty Cycle 36W 25% Duty Cycle 36W 32.0 50% Duty Cycle 18W 16.0 50% Duty Cycle 18W (142.3) 100% Duty Cycle 9W (71.2) 100% Duty Cycle 9W 24.0 12.0 (106.8) (53.4) 16.0 8.0 (71.2) (35.6) 8.0 4.0 (35.6) (17.8) 0 0.010 0.020 0.030 0.040 0.050 0.060 0.070 0 0.040 0.080 0.120 0.160 0.200 0.240 0.280 (0.25) (0.51) (0.76) (1.02) (1.27) (1.52) (1.78) (1.02) (2.03) (3.05) (4.06) (5.08) (6.10) (7.11) Stroke - in (mm) Stroke - in (mm) Force values for reference only. All specifications subject to change without notice. ® Ledex Solenoids G8 www.ledex.com 1.937.454.345 Fax: 1.937.898.864 LINEAR Low Profile Force - lb (newtons) Force - lb (newtons) Time - ms LINEAR Low Profile ® Ledex Low Profile Size 4EF/4EC — Push or Pull Size 4EF Short Stroke, Flat Face All catalog products manufactured after Part Number: 19440-0XX April 1, 006 are RoHS Compliant Specifications Size 4EC Medium Stroke, Conical Face Dielectric Strength 3-4 awg, 1000 VRMS ; 5-33 awg, Part Number: 19409-0XX 100 VRMS Recommended Maximum watts dissipated by Minimum Heat Sink solenoid are based on an unrestricted Performance flow of air at 0°C, with solenoid Maximum Duty Cycle 100% 50% 5% 10% mounted on the equivalent of an 1 aluminum plate measuring 6 ⁄ ” Maximum ON Time (sec) ∞ 100 36 9 4 1 1 square by ⁄ ” thick when pulsed continuously 8 Coil Resistance 3-33 awg, ±5% Maximum ON Time (sec) ∞ 16 44 10  Weight 6.0 oz (170 gms) for single pulse Holding Force 4EF 37.0 lb (164.6 N) @ 105°C Watts (@ 0°C) 1.5 5 50 15 Holding Force 4EC 16.0 lb (71. N) @ 105°C Ampere Turns (@ 0°C) 714 1000 145 50 Dimensions Ø1.56" x 0.835" L (See page G17) Coil Data How to Order awg Resistance # VDC VDC VDC VDC 3 4 (0XX) (@0°C) Turns (Nom) (Nom) (Nom) (Nom) Add the coil awg number (0XX) to the part number (for 3 1.59 66 4.3 6.0 8.5 13.4 example: to order a 25% duty cycle unit rated at 21 VDC, 4 .0 301 5. 7.3 10.4 16.4 specify 129440-027). Please see www.ledex.com (click 5 3.54 384 6.6 9. 13.1 1.0 on Stock Products tab) for our list of stock products 6 5.67 486 8.3 11.7 16.6 6.0 available through our North American distributors. 7 8.76 600 10.4 14.6 1.0 33.0 8 13.80 748 13. 18.5 6.0 4.0 Size 4EF and 4EC–Typical Speed @ No Load, 0°C 9 .60 975 16.6 3.0 33.0 5.0 40 30 34.80 1190 1.0 9.0 4.0 66.0 31 56.70 150 7.0 37.0 53.0 84.0 100% Duty 12.5W 3 88.30 1908 33.0 46.0 66.0 104.0 32 50% Duty 25W 33 138.00 360 4.0 59.0 83.0 13.0 25% Duty 50W 10% Duty 125W 1 Continuously pulsed at stated watts and duty cycle 24  Single pulse at stated watts (with coil at ambient room temperature 0°C) 16 3 Other coil awg sizes available — please consult factory 4 Reference number of turns 8 0 0.080 0.160 0.240 0.320 0.400 (2.03) (4.06) (6.10) (8.13) (10.16) Stroke - in (mm) Size 4EF— Typical Force @ 0°C Size 4EC— Typical Force @ 0°C 80.0 40.0 (356.0) (178.0) 10% Duty Cycle 125W 10% Duty Cycle 125W 25% Duty Cycle 50W 25% Duty Cycle 50W 50% Duty Cycle 25W 50% Duty Cycle 25W 60.0 30.0 100% Duty Cycle 12.5W 100% Duty Cycle 12.5W (266.9) (133.5) 40.0 20.0 (178.0) (89.0) 20.0 10.0 (89.0) (44.5) 0 0.020 0.040 0.060 0.080 0.100 0.120 0.140 0 0.050 0.100 0.150 0.200 0.250 0.300 (0.51) (1.02) (1.52) (2.03) (2.54) (3.05) (3.56) (1.27) (2.54) (3.81) (5.08) (6.35) (7.62) Stroke - in (mm) Stroke - in (mm) Force values for reference only. All specifications subject to change without notice. ® Ledex Solenoids G9 www.ledex.com 1.937.454.345 Fax: 1.937.898.864 Force - lb (newtons) Force - lb (newtons) Time - ms ® Ledex Low Profile Size 5SF — Push or Pull Short Stroke, Flat Face All catalog products manufactured after April 1, 006 are RoHS Compliant Part Number: 19450-0XX Performance Specifications Dielectric Strength 3 awg, 1000 VRMS ; 4-33 awg, 100 Maximum Duty Cycle 100% 50% 5% 10% VRMS Maximum ON Time (sec) ∞ 100 36 10 Recommended Maximum watts dissipated by 1 when pulsed continuously Minimum Heat Sink solenoid are based on an unrestricted Maximum ON Time (sec) ∞ 160 44 13 flow of air at 0°C, with solenoid  for single pulse mounted on the equivalent of an 1 aluminum plate measuring 7 ⁄ ”  Watts (@ 0°C) 1 4 84 10 1 square by ⁄ ” thick 8 Ampere Turns (@ 0°C) 860 10 170 730 Coil Resistance 3-33 awg, ±5% Coil Data Weight 9.0 oz (55 gms) awg Resistance # VDC VDC VDC VDC Holding Force 58.0 lb (58.0 N) @ 105°C 3 4 (0XX) (@0°C) Turns (Nom) (Nom) (Nom) (Nom) Dimensions Ø1.875" x 0.880" L (See page G17) 3 .03 88 6.1 8.6 1.1 19. 4 3.0 360 7.6 10.8 15.3 4.0 5 4.91 440 9.6 13.6 19. 31.0 6 7.7 550 1.1 17.1 4.0 38.0 How to Order 7 11.1 636 15.0 1.0 30.0 48.0 8 18.79 840 19. 7.0 39.0 61.0 Add the coil awg number (0XX) to the part number 9 30.48 1088 4.0 34.0 48.0 77.0 (for example: to order a 25% duty cycle unit rated at 30 30 44.86 175 30.0 43.0 61.0 96.0 VDC, specify 129450-027). 31 70.90 1596 38.0 54.0 76.0 11.0 Please see www.ledex.com (click on Stock Products 3 109.00 1974 47.0 67.0 95.0 150.0 tab) for our list of stock products available through our 33 175.00 496 60.0 86.0 11.0 19.0 North American distributors. 1 Continuously pulsed at stated watts and duty cycle  Single pulse at stated watts (with coil at ambient room temperature 0°C) 3 Other coil awg sizes available — please consult factory 4 Reference number of turns Size 5SF— Typical Force @ 0°C Size 5SF— Typical Speed @ No Load, 0°C 100.0 20 (444.8) 10% Duty 210W 25% Duty 84W 100% Duty 21W 80.0 50% Duty 42W 16 50% Duty 42W (355.9) 100% Duty 21W 25% Duty 84W 10% Duty 210W 60.0 12 (266.9) 40.0 8 (177.9) 20.0 4 (89.0) 0 0.020 0.040 0.060 0.080 0.100 0.120 0.140 0 0.040 0.080 0.120 0.160 0.200 (0.51) (1.02) (1.52) (2.03) (2.54) (3.05) (3.56) (1.02) (2.03) (3.05) (4.06) (5.08) Stroke - in (mm) Stroke - in (mm) Force values for reference only. All specifications subject to change without notice. ® Ledex Solenoids G10 www.ledex.com 1.937.454.345 Fax: 1.937.898.864 LINEAR Low Profile Force - lb (newtons) Time - ms LINEAR Low Profile ® Ledex Low Profile Size 5EC — Push or Pull Medium Stroke, Conical Face All catalog products manufactured after Part Number: 19415-0XX April 1, 006 are RoHS Compliant Performance Specifications Dielectric Strength 3 awg, 1000 VRMS ; 4-33 awg, 100 Maximum Duty Cycle 100% 50% 5% 10% VRMS Maximum ON Time (sec) ∞ 100 36 10 Recommended Maximum watts dissipated by 1 when pulsed continuously Minimum Heat Sink solenoid are based on an unrestricted Maximum ON Time (sec) ∞ 160 44 13 flow of air at 0°C, with solenoid  for single pulse mounted on the equivalent of an 1 aluminum plate measuring 7 ⁄ ”  Watts (@ 0°C) 1 4 84 10 1 square by ⁄ ” thick 8 Ampere Turns (@ 0°C) 1015 1440 030 310 Coil Resistance 3-33 awg, ±5% Coil Data Weight 11.5 oz (36.0 gms) awg Resistance # VDC VDC VDC VDC Holding Force 7.0 lb (10.1 N) @ 105°C 3 4 (0XX) (@0°C) Turns (Nom) (Nom) (Nom) (Nom) Dimensions Ø1.875" x 1.035" L (See page G17) 3 .70 384 7. 10.1 14.3 3.0 4 4.30 486 9.0 1.7 18.0 8.0 5 6.66 590 11.5 16. 3.0 36.0 6 10.30 737 14.0 0.0 8.0 44.0 How to Order 7 15.70 900 17.7 5.0 35.0 56.0 8 6.60 1190 3.0 3.0 45.0 7.0 Add the coil awg number (0XX) to the part number 9 38.00 1380 8.0 40.0 56.0 89.0 (for example: to order a 25% duty cycle unit rated at 35 30 6.10 1768 36.0 51.0 71.0 113.0 VDC, specify 129415-027). 31 96.10 166 45.0 64.0 90.0 143.0 Please see www.ledex.com (click on Stock Products 3 157.00 816 57.0 80.0 113.0 179.0 tab) for our list of stock products available through our 33 41.00 343 71.0 101.0 143.0 6.0 North American distributors. 1 Continuously pulsed at stated watts and duty cycle  Single pulse at stated watts (with coil at ambient room temperature 0°C) 3 Other coil awg sizes available — please consult factory 4 Reference number of turns Size 5EC— Typical Force @ 0°C Size 5EC— Typical Speed @ No Load, 0°C 40.0 40 (177.9) 10% Duty 210W 25% Duty 84W 100% Duty 21W 32.0 50% Duty 42W 32 50% Duty 42W (142.3) 100% Duty 21W 25% Duty 84W 10% Duty 210W 24.0 24 (106.8) 16.0 16 (71.2) 8.0 8 (35.6) 0 0.100 0.200 0.300 0.400 0.500 0.600 0 0.100 0.200 0.300 0.400 0.500 (2.54) (5.08) (7.62) (10.16) (12.70) (15.24) (2.54) (5.08) (7.62) (10.16) (12.70) Stroke - in (mm) Stroke - in (mm) Force values for reference only. All specifications subject to change without notice. ® Ledex Solenoids G11 www.ledex.com 1.937.454.345 Fax: 1.937.898.864 Force - lb (newtons) Time - ms ® Ledex Low Profile Size 6SF — Push or Pull Short Stroke, Flat Face All catalog products manufactured after Part Number: 187789-0XX April 1, 006 are RoHS Compliant Performance Specifications Dielectric Strength 3-31 awg, 100 VRMS ; 3-33 awg, Maximum Duty Cycle 100% 50% 5% 10% 1500 VRMS Maximum ON Time (sec) ∞ 87 36 13 Recommended Maximum watts dissipated by 1 when pulsed continuously Minimum Heat Sink solenoid are based on an unrestricted Maximum ON Time (sec) ∞ 140 44 16 flow of air at 0°C, with solenoid  for single pulse mounted on the equivalent of an 3 aluminum plate measuring 1 ⁄ ” 8 Watts (@ 0°C) 3 64 18 30 1 square by ⁄ ” thick 8 Ampere Turns (@ 0°C) 140 1760 490 390 Coil Resistance 3-33 awg, ±5% Coil Data Weight 1 lb  oz (510.3 gms) awg Resistance # VDC VDC VDC VDC Holding Force 88.0 lb (391.4 N) @ 105°C 3 4 (0XX) (@0°C) Turns (Nom) (Nom) (Nom) (Nom) Dimensions Ø.50" x 1.145" L (See page G18) 3 3.59 43 10.3 14.6 1.0 33.0 4 5.4 500 13.0 18.4 6.0 41.0 5 9.51 708 16.7 4.0 33.0 53.0 6 14.44 858 1.0 30.0 4.0 66.0 How to Order 7 3.69 1110 7.0 38.0 53.0 84.0 8 38.7 1411 34.0 48.0 68.0 106.0 Add the coil awg number (0XX) to the part number 9 54.6 1638 41.0 59.0 83.0 131.0 (for example: to order a 25% duty cycle unit rated at 53 30 93.67 184 53.0 76.0 107.0 168.0 VDC, specify 187789-027). 31 143.00 645 67.0 95.0 134.0 11.0 Please see www.ledex.com (click on Stock Products 3 3.00 338 83.0 118.0 167.0 6.0 tab) for our list of stock products available through our 33 338.00 4004 105.0 149.0 10.0 331.0 North American distributors. 1 Continuously pulsed at stated watts and duty cycle  Single pulse at stated watts (with coil at ambient room temperature 0°C) 3 Other coil awg sizes available — please consult factory 4 Reference number of turns Size 6SF— Typical Force @ 0°C Size 6SF— Typical Speed @ No Load, 0°C 80 240 100% Duty 32W 10% Duty Cycle 320W (1067.5) 50% Duty 64W 25% Duty Cycle 128W 60 25% Duty 128W 50% Duty Cycle 64W 10% Duty 320W 100% Duty Cycle 32W 160 (711.7) 40 80 (355.9) 20 0 0.1 0.2 0.3 0.4 0 0.040 0.080 0.120 0.160 0.200 (2.54) (5.08) (7.62) (10.16) (1.02) (2.03) (3.05) (4.06) (5.08) Stroke - in (mm) Stroke - in (mm) Force values for reference only. All specifications subject to change without notice. ® Ledex Solenoids G1 www.ledex.com 1.937.454.345 Fax: 1.937.898.864 LINEAR Low Profile Force - lb (newtons) Time - ms LINEAR Low Profile ® Ledex Low Profile Size 6EC — Push or Pull Medium Stroke, Conical Face All catalog products manufactured after Part Number: 17391-0XX April 1, 006 are RoHS Compliant Performance Specifications Dielectric Strength 3-31 awg, 100 VRMS ; 3-33 awg, Maximum Duty Cycle 100% 50% 5% 10% 1500 VRMS Maximum ON Time (sec) ∞ 87 36 13 Recommended Maximum watts dissipated by 1 when pulsed continuously Minimum Heat Sink solenoid are based on an unrestricted Maximum ON Time (sec) ∞ 140 44 16 flow of air at 0°C, with solenoid  for single pulse mounted on the equivalent of an 3 aluminum plate measuring 1 ⁄ ” 8 Watts (@ 0°C) 3 64 18 30 1 square by ⁄ ” thick 8 Ampere Turns (@ 0°C) 1480 080 940 460 Coil Resistance 3-33 awg, ±5% Coil Data Weight 1 lb 5.50 oz (609.5 gms) awg Resistance # VDC VDC VDC VDC Holding Force 49.0 lb (18.0 N) @ 105°C 3 4 (0XX) (@0°C) Turns (Nom) (Nom) (Nom) (Nom) Dimensions Ø.50" x 1.330" L (See page G18) 3 4.69 567 1.3 17. 4.0 38.0 4 7.43 710 15.5 .0 31.0 48.0 5 1.90 960 19.9 8.0 39.0 6.0 6 19.70 1170 5.0 35.0 49.0 78.0 How to Order 7 3.00 1500 3.0 44.0 63.0 99.0 8 51.60 1904 40.0 56.0 79.0 15.0 Add the coil awg number (0XX) to the part number 9 74.40 3 49.0 69.0 98.0 154.0 (for example: to order a 25% duty cycle unit rated at 63 30 16.00 940 63.0 89.0 16.0 198.0 VDC, specify 173921-027). 31 195.00 3611 80.0 11.0 159.0 50.0 Please see www.ledex.com (click on Stock Products 3 88.00 4350 98.0 138.0 195.0 306.0 tab) for our list of stock products available through our 33 47.00 5010 16.0 177.0 51.0 394.0 North American distributors. 1 Continuously pulsed at stated watts and duty cycle  Single pulse at stated watts (with coil at ambient room temperature 0°C) 3 Other coil awg sizes available — please consult factory 4 Reference number of turns Size 6EC— Typical Force at 0°C Size 6EC— Typical Speed @ No Load, 0°C 100.0 40 (444.8) 100% Duty 32W 10% Duty Cycle 320W 50% Duty 64W 25% Duty Cycle 128W 80.0 32 25% Duty 128W 50% Duty Cycle 64W (355.9) 100% Duty Cycle 32W 10% Duty 320W 60.0 24 (266.9) 40.0 16 (177.9) 20.0 8 (89.0) 0 0.100 0.200 0.300 0.400 0.500 0.600 0 0.080 0.160 0.240 0.320 0.400 (2.54) (5.08) (7.62) (10.16) (12.70) (15.24) (2.03) (4.06) (6.10) (8.13) (10.16) Stroke - in (mm) Stroke - in (mm) Force values for reference only. All specifications subject to change without notice. ® Ledex Solenoids G13 www.ledex.com 1.937.454.345 Fax: 1.937.898.864 Force - lb (newtons) Time - ms ® Ledex Low Profile Size 7EC — Push or Pull Medium Stroke, Conical Face All catalog products manufactured after Part Number: 191357-0XX April 1, 006 are RoHS Compliant Performance Specifications Dielectric Strength 3-9 awg, 100 VRMS ; 30-33 awg, Maximum Duty Cycle 100% 50% 5% 10% 1500 VRMS Maximum ON Time (sec) ∞ 80 38 16 Recommended Maximum watts dissipated by 1 when pulsed continuously Minimum Heat Sink solenoid are based on an unrestricted Maximum ON Time (sec) ∞ 138 50 18 flow of air at 0°C, with solenoid  for single pulse mounted on the equivalent of an 1 aluminum plate measuring 15 ⁄ ” 8 Watts (@ 0°C) 35 70 140 350 1 square by ⁄ ” thick 8 Ampere Turns (@ 0°C) 1805 555 3610 5710 Coil Resistance 3-30 awg, ±5%; 31-30 awg, ±10% Coil Data Weight .5 lb (1.134 kg) awg Resistance # VDC VDC VDC VDC Holding Force 50.0 lb (.4 N) @ 105°C 3 4 (0XX) (@0°C) Turns (Nom) (Nom) (Nom) (Nom) Dimensions Ø.750" x 1.780" L (See page G18) 3 10.80 1044 19.0 7.0 39.0 61.0 4 16.50 174 4.0 34.0 48.0 76.0 5 7.00 1635 31.0 43.0 61.0 97.0 6 43.80 091 39.0 55.0 78.0 14.0 How to Order 7 68.40 603 49.0 69.0 98.0 155.0 8 108.00 355 61.0 87.0 13.0 194.0 Add the coil awg number (0XX) to the part number 9 16.00 3933 75.0 106.0 151.0 38.0 (for example: to order a 25% duty cycle unit rated at 48 30 65.00 5044 96.0 136.0 193.0 305.0 VDC, specify 191357-024). 31 385.00 5800 116.0 164.0 3.0 367.0 Please see www.ledex.com (click on Stock Products 3 583.00 730 143.0 0.0 86.0 45.0 tab) for our list of stock products available through our 33 88.00 8400 176.0 48.0 351.0 600.0 North American distributors. 1 Continuously pulsed at stated watts and duty cycle  Single pulse at stated watts (with coil at ambient room temperature 0°C) 3 Other coil awg sizes available — please consult factory 4 Reference number of turns Size 7EC— Typical Force @ 0°C Size 7EC— Typical Speed @ No Load, 0°C 100.0 100 (444.8) 10% Duty Cycle 350W 100% Duty 35W 25% Duty Cycle 140W 50% Duty 70W 80.0 50% Duty Cycle 70W 80 25% Duty 140W (355.9) 100% Duty Cycle 35W 10% Duty 350W 60.0 60 (266.9) 40.0 40 (177.9) 20.0 20 (89.0) 0 0.100 0.200 0.300 0.400 0.500 0.600 0.700 0 0.200 0.400 0.600 0.800 1.000 (2.54) (5.08) (7.62) (10.16) (12.70) (15.24) (17.78) (5.08) (10.16) (15.24) (20.32) (25.4) Stroke - in (mm) Stroke - in (mm) Force values for reference only. All specifications subject to change without notice. ® Ledex Solenoids G14 www.ledex.com 1.937.454.345 Fax: 1.937.898.864 LINEAR Low Profile Force - lb (newtons) Time - ms LINEAR Low Profile ® Ledex Low Profile Size 8EC — Push or Pull Medium Stroke, Conical Face All catalog products manufactured after Part Number: 191016-0XX April 1, 006 are RoHS Compliant Performance Specifications Dielectric Strength 3-7 awg, 100 VRMS ; 8-33 awg, Maximum Duty Cycle 100% 50% 5% 10% 1500 VRMS Maximum ON Time (sec) ∞ 7 43 0 Recommended Maximum watts dissipated by 1 when pulsed continuously Minimum Heat Sink solenoid are based on an unrestricted Maximum ON Time (sec) ∞ 13 56  flow of air at 0°C, with solenoid  for single pulse mounted on the equivalent of an 1 aluminum plate measuring 0 ⁄ ” 4 Watts (@ 0°C) 41 8 164 410 1 square by ⁄ ” thick 8 Ampere Turns (@ 0°C) 195 3105 4155 6945 Coil Resistance 3-30 awg, ±5%; 31-33 awg, ±10% Coil Data Weight 4.9 lb (. kg) awg Resistance # VDC VDC VDC VDC Holding Force 10.0 lb (533.7 N) @ 105°C 3 4 (0XX) (@0°C) Turns (Nom) (Nom) (Nom) (Nom) Dimensions Ø3.375" x .165" L (See page G18) 3 19.00 151 8.0 40.0 56.0 88.0 4 31.0 195 36.0 51.0 7.0 113.0 5 49.40 448 45.0 64.0 90.0 14.0 6 78.00 3060 57.0 80.0 113.0 179.0 How to Order 7 119.00 3740 70.0 99.0 140.0 1.0 8 184.00 4584 87.0 13.0 174.0 75.0 Add the coil awg number (0XX) to the part number 9 301.00 5936 111.0 157.0 .0 351.0 (for example: to order a 25% duty cycle unit rated at 90 30 45.00 6750 13.0 187.0 64.0 417.0 VDC, specify 191016-025). 31 683.00 8750 167.0 37.0 335.0 59.0 Please see www.ledex.com (click on Stock Products 3 1110.00 11000 13.0 30.0 47.0 — tab) for our list of stock products available through our 33 1509.00 1050 49.0 35.0 498.0 — North American distributors. 1 Continuously pulsed at stated watts and duty cycle  Single pulse at stated watts (with coil at ambient room temperature 0°C) 3 Other coil awg sizes available — please consult factory 4 Reference number of turns Size 8EC— Typical Force at 0°C Size 8EC— Typical Speed @ No Load, 0°C 200.0 100 (889.5) 100% Duty 41W 10% Duty Cycle 410W 50% Duty 82W 25% Duty Cycle 164W 160.0 80 25% Duty 164W 50% Duty Cycle 82W (711.6) 10% Duty 410W 100% Duty Cycle 41W 120.0 60 (533.7) 80.0 40 (355.9) 40.0 20 (177.9) 0.100 0.200 0.300 0.400 0.500 0.600 0.700 0 0.200 0.400 0.600 0.800 1.000 0 (2.54 ) (5.08) (7.62) (10.16) (12.70) (15.24) (17.78) (5.08) (10.16) (15.24) (20.32) (25.4) Stroke - in (mm) Stroke - in (mm) Force values for reference only. All specifications subject to change without notice. ® Ledex Solenoids G15 www.ledex.com 1.937.454.345 Fax: 1.937.898.864 Force - lb (newtons) Time - ms ® Ledex Low Profile Dimensions Inches (mm) All solenoids are illustrated in energized state Size OEC Size 1EC + + 0.250 0.015 0.50 0.53 0.250 0.015 - - + (12.7) + (6.35 0.381) (13.46) - (6.35 0.381) - max max + + 0.125 0.001 0.156 0.001 - - + + (3.175 0.025) - (3.962 0.025) - dia. + 0.25 0.750 + 0.031/-0.010 dia. 0.33 1.000 0.020 - (6.35) (8.38) + (19.05 + 0.787/-0.254) (25.4 0.508) - 0.500 0.656 (12.7) (16.662) + + 0.375 0.015 - 0.500 0.015 - + + (9.525 0.381) (12.7 0.381) - #2-56 NC-2A thd - #3-48 NC-2A thd + + + + 0.860 0.015 0.375 0.010 Leads 10" min 1.016 0.015 0.437 0.010 - - Leads 10" min - - + + + + 24 AWG Teflon (21.844 0.381) (9.525 0.254) - - 24 AWG PVC (25.806 0.381) (11.100 0.254) - - Size 3EF/3EC Size EF/EC + + + + 0.028 0.007 0.69 0.437 0.015 0.023 0.010 0.58 0.250 0.015 - - - - + + + + (0.711 0.178) (17.53) (11.100 0.381) (0.584 0.254) (14.73) (6.35 0.381) - - - - max max (3EF Only) (2EF Only) + + 0.187 0.001 0.156 0.001 - - + + (4.750 0.025) (3.962 0.025) - - dia. 0.44 dia. 0.36 1.125 + 0.031/-0.010 1.312 + 0.031/-0.010 (9.14) (11.18) (33.325 + 0.787/-0.254) (28.575 + 0.787/-0.254) 0.875 0.718 (22.225) (18.237) + + 0.500 0.015 0.500 0.015 - - + + (12.7 0.381) (12.7 0.381) - - #3-48 NC-2A thd #5-40 NC 2A thd + + + + 1.063 0.015 0.437 0.010 Leads 10" min 1.171 0.015 0.625 0.010 Leads 10" min - - - - + + + + (27.000 0.381) (11.100 0.254) 24 AWG PVC (29.743 0.381) (15.875 0.254) 24 AWG PVC - - - - Solenoid Shown Energized All specifications subject to change without notice. ® Ledex Solenoids G16 www.ledex.com 1.937.454.345 Fax: 1.937.898.864 LINEAR Low Profile LINEAR Low Profile ® Ledex Low Profile Dimensions Inches (mm) All solenoids are illustrated in energized state Size 4EF/4EC + + 0.034 0.010 0.500 0.015 - - 0.835 + + (0.864 0.254) (12.7 0.381) - - (21.209) (4EF Only) max + 0.218 0.001 - + (5.537 0.025) - dia. 0.53 1.562 + 0.031/-0.010 (13.46) (39.675 + 0.787/-0.254) 1.062 (26.975) + 0.500 0.015 - + (12.7 0.381) - #6-32 NC-2A thd + 1.322 0.015 0.75 Leads 10" min - + 22 AWG PVC (33.579 0.381) (19.05) - Size 5SF Size 5EC + + + 0.036 0.010 0.500 0.015 - - 0.500 0.015 0.88 - 1.035 + + + (0.914 0.254) (12.7 0.381) - - (12.7 0.381) (22.35) - (26.290) max max + + 0.250 0.001 - 0.250 0.001 - + (6.35 0.025) + - (6.35 0.025) - dia. + + 0.625 0.010 dia. - 0.625 0.010 - + (15.875 0.254) + (15.875 0.254) - - 1.250 1.250 (31.75) (31.75) 1.875 + 0.031/-0.010 1.875 + 0.031/-0.010 (47.625 + 0.787/-0.254) (47.625 + 0.787/-0.254) + 0.500 0.015 + - 0.500 0.015 - + (12.7 0.381) + - (12.7 0.381) #8-32 NC-2A thd - #8-32 NC-2A thd + 1.363 0.015 0.75 Leads 10" min + - 1.520 0.015 0.75 Leads 10" min - + 20 AWG PVC (34.620 0.381) (19.05) + - 20 AWG PVC (38.608 0.381) (19.05) - All specifications subject to change without notice. ® Ledex Solenoids G17 www.ledex.com 1.937.454.345 Fax: 1.937.898.864 ® Ledex Low Profile Dimensions Inches (mm) All solenoids are illustrated in energized state Size 6SF Size 6EC + + 0.036 0.010 1.33 + - 0.625 0.015 0.625 0.015 1.145 - - + (0.914 0.254) + (33.78) + - (29.083) (15.875 0.381) (15.875 0.381) - - max max + + 0.312 0.001 0.312 0.001 - - + + (7.925 0.025) (7.925 0.025) - - dia. dia. 0.72 0.72 2.250 + 0.031/-0.010 2.250 + 0.031/-0.010 (18.29) (18.29) (57.15 + 0.787/-0.254) (57.15 + 0.787/-0.254) 1.437 1.437 (36.500) (36.500) + + 0.625 0.015 0.625 0.015 - - + + (15.875 0.381) (15.875 0.381) - - #10-32 NF-2A thd #10-32 NF-2A thd + + + 1.939 0.015 0.875 0.010 1.755 0.015 0.75 Leads 10" min Leads 10" min - - - + + + (44.577 0.381) (19.05) 20 AWG PVC (49.251 0.381) (22.225 0.254) 20 AWG PVC - - - Size 7EC Size 8EC + + 0.750 0.015 0.750 0.015 1.75 - - + + (44.45) (19.05 0.381) + - (19.05 0.381) 2.165 0.015 - - max + (54.991 0.381) - + 1.062 0.010 - + 0.375 0.001 + + - 0.437 0.001 (26.975 0.254) - - + (9.525 0.025) + - (11.100 0.025) + - dia. 0.875 0.010 - 2.750 + 0.010/-0.020 dia. + 3.375 + 0.031/-0.010 (22.225 0.254) - (69.85 + 0.254/-0.508) (85.725 + 0.787/-0.254) 2.125 1.750 (53.975) (44.45) + 0.855 0.015 - + 0.750 0.015 - + (21.717 0.381) + - 0.250-28 NF-2A thd (19.05 0.381) 0.250-28 NF-2A thd - Leads 10" min. 20 awg Leads 10" min. + 20 awg PVC 2.500 0.015 0.875 - + 3.020 0.015 0.875 + - (63.500 0.381) (22.225) - + (76.708 0.381) (22.225) - All specifications subject to change without notice. ® Ledex Solenoids G18 www.ledex.com 1.937.454.345 Fax: 1.937.898.864 LINEAR Low Profile