U5350-04-RBL2 - LS CABLE

Description

LS CABLE U5350-04-RBL2 Cable - 5e, 24AWG, UTP, 8C Solid Bare Copper, 350mhz, Riser Rated, PVC Jacket, 1000 ft.

Part Number

U5350-04-RBL2

Price

Request Quote

Manufacturer

LS CABLE

Lead Time

Request Quote

Category

PRODUCTS - U

Specifications

Length

1000ft

Weight

27l lbs

Features

10Base-T (IEEE 802.3), 100Base-T (IEEE 802.3u), 1000Base-TX, 100 Vg-AnyLAN (IEEE 802.12), Token Ring (IEEE 802.5), TP-PMD (ANSI X3T9), 350Mbps CDDI, ATM 155, voice and multimedia
24AWG solid bare 100% copper conductor
350mhz rating provides additional performance over the Cat5e 100mhz standard
4 twisted unshielded pairs
Compliant with EIA/TIA standards
Count down footage markings 1000' to 0
Exceeds Cat5e specification
High quality pull box for no tangles (Contractor Favorite)

Datasheet

LS Cable-U5350-Datashee-861314179t.pdf

67 KiB

Download

Extracted Text

ISSUED: FEB. 3, 2010 PAGE : 1 OF 6 PURENET-U5350-00 (Part No.: U5350-04-RXX2, U5350-04-PXX2) for 4 PAIR UTP CABLES (ENHANCED CATEGORY 5E) ( Ref.: UL 444, ANSI/TIA/EIA-568B.2 & ISO/IEC 11801,IEC 61156-5 ) PREPARED BY: KYUNG - HO HA Engineer Passive Solution Team CHECKED BY: TAE - WOO KIM Manager Passive Solution Team APPROVED BY: MIN SON Genaral Manager Passive Solution Team PAGE : 2 of 6 (PURENET-U5350-00) 1. SCOPE This specification is based on the specifications of UL 444, ANSI/TIA/EIA-568-B.2 and ISO/IEC 11801 and covers the requirements for unshielded twisted pair (UTP) cables of 100Ω, enhanced category 5e (En-Cat.5E). - Applicable cable size & type ; 4 pairs, PVC sheath (CMR, CMP) 2. CABLE CONSTRUCTION 2.1 CONDUCTOR The conductors shall be solid, annealed and bare copper with a diameter of AWG24 and minimum acceptable diameter shall be 0.485mm. 2.2 INSULATION Each conductor shall be insulated with solid high density polyethylene(CMR grade) and FEP(Flournated Ethylene Propylene)(CMP grade) or other material to meet the requirements of this specification. The insulation shall be uniform and shall not have any defects. The diameter over the insulation shall be maximum 1.22mm. 2.3 COLOR CODE The color code of insulation shall be shown as Table 1. Table 1. Color code of insulation Pair a-wire b-wire No. Base Stripe Base Stripe 1 White Blue Blue - 2 White Orange Orange - 3 White Green Green - 4 White Brown Brown - * The stripe marking(CMR grade) or ring marking(CMP grade) shall be applied on the white color. 2.4 CORE ASSEMBLY Two insulated conductors shall be twisted into a pair. Four twisted pairs shall be assembled into a cable core. PAGE : 3 of 6 (PURENET-U5350-00) 2.5 SHEATH The flame retardant PVC compound shall be applied over the cable core. The sheath shall be uniform and shall not have any defects. The thickness of sheath and cable diameter shall be shown as Table 2. Table 2. Thickness of sheath and cable diameter Sheath thickness Cable diameter Grade (Nominal, mm) (Nominal, mm) CMR 0.45 4.9 CMP 0.35 4.7 Insulated Conductor Twisted Pair Rip cord(optional) PVC Sheath Fig. 1. Cross-sectional Diagram of cable PAGE : 4 of 6 (PURENET-U5350-00) 3. ELECTRICAL CHARACTERISTICS 3.1 ELECTRICAL CHARACTERISTICS Characteristics Unit En-Cat.5e DC Resistance Ω/100m Max. 9.38 DC Resistance Unbalance % Max. 5.0 Mutual Capacitance nF/100m Max. 5.6 Capacitance Unbalance pF/100m Max. 330 (Pair to Ground) Insulation resistance ㏁-100m Min. 500 Dielectric Strength DC KV/sec. 2.5 / 2 Impedance - Zo 1 ~100MHz Ω 100 ± 15 Return Loss (RL) dB/100m RL Att. NEXT PSNEXT (Min.) (Max.) (Min.) (Min.) Attenuation (Att.) 1MHz 20.0 2.0 68.3 65.3 4MHz 23.0 4.1 59.3 56.3 Pair-to-Pair 10MHz 25.0 6.5 53.3 50.3 Near End 16MHz 25.0 8.2 50.2 47.2 Cross Talk (NEXT) 20MHz 25.0 9.3 48.8 45.8 31.25MHz 23.6 11.7 45.9 42.9 Power Sum 62.5MHz 21.5 17.0 41.4 38.4 Near End 100MHz 20.1 22.0 38.3 35.3 Cross Talk 125MHz 19.4 24.9 33.8 30.8 (PSNEXT) 200MHz 18.0 32.4 30.8 27.8 250MHz 17.3 36.9 29.3 26.3 300MHz 16.8 41.0 28.1 25.1 350MHz 16.3 44.9 27.1 24.1 Pair-to-Pair dB/100m ELFEXT PSELFEXT Equal Level Far End (Min.) (Min.) Cross Talk (ELFEXT) 1MHz 63.8 60.8 4MHz 51.8 48.8 Power Sum 10MHz 43.8 40.8 Equal Level Far End 16MHz 39.7 36.7 Cross Talk 20MHz 37.8 34.8 (PSELFEXT) 31.25MHz 33.9 30.9 62.5MHz 27.9 24.9 100MHz 23.8 20.8 125MHz 21.9 18.9 200MHz 17.8 14.8 250MHz 15.8 12.8 300MHz 14.3 11.3 350MHz 12.9 9.9 Propagation 1MHz ns/100m Max. 570 Delay 10MHz Max. 545 100MHz Max. 538 350MHz Max. 536 Propagation 1MHz ns/100m Max. 45 Delay Skew 10MHz Max. 45 100MHz Max. 45 350MHz Max. 45 *Above 100MHz are information only. PAGE : 5 of 6 (PURENET-U5350-00) 3.2 MEASUREMENTS PRECAUTION All electrical characteristics specified in clause 3.1 shall be tested on one sample length of 100 meter or greater removed from the package . 4. PHYSICAL PROPERTIES 4.1 INSULATION The unaged tensile strength and elongation, measured in accordance with clause 7.3 of UL 444 shall be, minimum 16.5MPa and 300%, respectively (HDPE material). minimum 17.2MPa and 200%, respectively (FEP material). The heat-aged tensile strength and elongation, measured in accordance with clause 7.3 of UL 444 shall be minimum 75% and 75% of un-aged, respectively. The insulation shrinkage, measured in accordance with clause 7.4 of UL 444, shall not exceed 9.5mm. The insulation cold bend, measured in accordance with clause 7.5 of UL 444, shall show no visible cracks. 4.2 SHEATH The unaged tensile strength and elongation, measured in accordance with clause 7.8 of UL 444 shall be minimum 17.24MPa and 100%, respectively. The heat-aged tensile strength and elongation, measured in accordance with clause 7.8 of UL 444 shall be minimum 85% and 50% of un-aged, respectively. 4.3 CABLE COLD BEND All cables shall meet the requirements of clause 7.10 of UL 444. 4.4 FLAME REQUIREMENTS A cable marked CMR shall comply with the riser test specified in UL 1666. A cable marked CMP shall comply with NFPA 262. PAGE : 6 of 6 (PURENET-U5350-00) 5. MARKING OF CABLES The cable shall be marked on the sheath to designate the transmission performance and/or others (If ordered by purchaser). The marking shall be repeated through the outer sheath clearly. The marking details are as follows, - CMR Grade (LENGTH MARKING) PureNet E335253 UTP 4PR 24AWG CMR 75C C(UL)US Listed (UL) Category 5E TIA/EIA-568B.2 350MHz Listed (ETL) MM/YY - CMP Grade (LENGTH MARKING) PureNet E335253 UTP 4PR 24AWG CMP 75C C(UL)US Listed (UL) Category 5E TIA/EIA-568B.2 350MHz Listed (ETL) MM/YY *MM/YY: Manufactured Month/Year(each 2 digits) 6. PACKING Each length of completed cable shall be wound on box. The standard delivery length is 305m. 7. MARKING ON TAG OR BOX The following details shall be marked on a tag affixed to each shipping length of cable in a box, or directly printed on the outer surface of the box. 1) AWG size and number of pairs 2) Flame test classification 3) Manufacturer name and Logo 4) Length 5) Others - End of Specification -

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products