LITTELFUSE SMCJ6.0A

Silicon Avalanche Diodes 1500W Surface Mount Transient Voltage Supressors RoHS ® SMCJ Series FEATURES • RoHS compliant • For surface mounted applications in order to optimize board space • Low profile package • Built-in strain relief • Glass passivated junction • Low inductance • Excellent clamping capability • Repetition Rate(duty cycle): 0.05% • Fast response time: typically less than 1.0ps from 0 Volts to BV min. • Typical IR less than 1mA above 10V MAXIMUM RATINGS AND CHARACTERISTICS • High temperature soldering: 250˚C/10 seconds at terminals @25˚C AMBIENT TEMPERATURE (unless otherwise noted) • Plastic package has Underwriters Laboratory Flammability 94V-O PARAMETER SYMBOL VALUE UNIT Peak Pulse Power Dissipation on Min P Watts PPM Agency Approvals: Recognized under the Components Program 10/1000µs waveform (note 1,2,FIG.1) 1500 of Underwriters Laboratories. Peak Pulse Current of on 10/1000µs I See Table 1 Amps PPM Agency File Number: E128662 waveform (note 1,FIG.3) Peak Forward Surge Current, 8.3ms Single Half SIne Wave Superimposed I Amps 200 FSM on Rated Load, (JEDEC Method) (note 2,3) Operating junction and Storage T T °C j, sTG -55 to +150 Temperature Range Notes: 1. Non-repetitive current pulse , per Fig. 3 and derated above T =25˚C per Fig 2 A 2 2. Mounted on 8.0mm .Copper Pads to each terminal 3. 8.3ms single half sine-wave , or equivalent square wave, Duty cycle = 4 pulses per minutes maximum. ORDERING INFORMATION Mechanical Specifications: Weight: 0.007ounce, 0.21 gram Case: JEDEC DO-214AB Molded Plastic over C A SMCJ glass passivated junction Mounting Position: Any Voltage Polarity: Color band denotes cathode except Bi-Directional Bidirectional 5% Voltage Tolerance Terminal: Solder Plated, solderable per MIL-STD-750, Method 2026 Standard Packaging: 16mm tape (EIA STD RS-481) Tape and reeled (3000 pcs) 274 www.littelfuse.com Silicon Avalanche Diodes 1500W Surface Mount Transient Voltage Supressors RoHS SMCJ Series ELECTRICAL SPECIFICATION @ Tamb 25°C Maximum Reverse Breakdown Part Part Device Marking Test Maximum Maximum Reverse Number Number Code Stand off Voltage Clamping Peak Pulse Current Leakage (Uni) (Bi) Voltage VBR (Volts) @ IT Voltage Current IT (mA) IR @ VR VR VC @ IPP IPP (µA) (Volts) UNI BI (Volts) (A) MIN MAX SMCJ5.0A SMCJ5.0CA GDE BDE 5.0 6.40 7.00 10 9.2 163.0 800 SMCJ6.0A SMCJ6.0CA GDG BDG 6.0 6.67 7.37 10 10.3 145.7 800 SMCJ6.5A SMCJ6.5CA GDK BDK 6.5 7.22 7.98 10 11.2 134.0 500 SMCJ7.0A SMCJ7.0CA GDM BDM 7.0 7.78 8.60 10 12.0 125.0 200 SMCJ7.5A SMCJ7.5CA GDP BDP 7.5 8.33 9.21 1 12.9 116.3 100 SMCJ8.0A SMCJ8.0CA GDR BDR 8.0 8.89 9.83 1 13.6 110.3 50 6 SMCJ8.5A SMCJ8.5CA GDT BDT 8.5 9.44 10.40 1 14.4 104.2 20 SMCJ9.0A SMCJ9.0CA GDV BDV 9.0 10.00 11.10 1 15.4 97.4 10 SMCJ10A SMCJ10CA GDX BDX 10.0 11.10 12.30 1 17.0 88.3 5 SMCJ11A SMCJ11CA GDZ BDZ 11.0 12.20 13.50 1 18.2 82.5 5 SMCJ12A SMCJ12CA GEE BEE 12.0 13.30 14.70 1 19.9 75.4 5 SMCJ13A SMCJ13CA GEG BEG 13.0 14.40 15.90 1 21.5 69.8 5 SMCJ14A SMCJ14CA GEK GEK 14.0 15.60 17.20 1 23.2 64.7 5 SMCJ15A SMCJ15CA GEM GEM 15.0 16.70 18.50 1 24.4 61.5 5 SMCJ16A SMCJ16CA GEP BEP 16.0 17.80 19.70 1 26.0 57.7 5 SMCJ17A SMCJ17CA GER BER 17.0 18.90 20.90 1 27.6 54.4 5 SMCJ18A SMCJ18CA GET BET 18.0 20.00 22.10 1 29.2 51.4 5 SMCJ20A SMCJ20CA GEV BEV 20.0 22.20 24.50 1 32.4 46.3 5 SMCJ22A SMCJ22CA GEX BEX 22.0 24.40 26.90 1 35.5 42.3 5 SMCJ24A SMCJ24CA GEZ BEZ 24.0 26.70 29.50 1 38.9 38.6 5 SMCJ26A SMCJ26CA GFE BFE 26.0 28.90 31.90 1 42.1 35.7 5 SMCJ28A SMCJ28CA GFG BFG 28.0 31.10 34.40 1 45.4 33.1 5 SMCJ30A SMCJ30CA GFK BFK 30.0 33.30 36.80 1 48.4 31.0 5 SMCJ33A SMCJ33CA GFM BFM 33.0 36.70 40.60 1 53.3 28.2 5 SMCJ36A SMCJ36CA GFP BFP 36.0 40.00 44.20 1 58.1 25.9 5 SMCJ40A SMCJ40CA GFR BFR 40.0 44.40 49.10 1 64.5 23.3 5 SMCJ43A SMCJ43CA GFT BFT 43.0 47.80 52.80 1 69.4 21.7 5 SMCJ45A SMCJ45CA GFV BFV 45.0 50.00 55.30 1 72.7 20.6 5 SMCJ48A SMCJ48CA GFX BFX 48.0 53.30 58.90 1 77.4 19.4 5 SMCJ51A SMCJ51CA GFZ BFZ 51.0 56.70 62.70 1 82.4 18.2 5 SMCJ54A SMCJ54CA GGE BGE 54.0 60.00 66.30 1 87.1 17.3 5 SMCJ58A SMCJ58CA GGG BGG 58.0 64.40 71.20 1 93.6 16.1 5 SMCJ60A SMCJ60CA GGK BGK 60.0 66.70 73.70 1 96.8 15.5 5 SMCJ64A SMCJ64CA GGM BGM 64.0 71.10 78.60 1 103.0 14.6 5 SMCJ70A SMCJ70CA GGP BGP 70.0 77.80 86.00 1 113.0 13.3 5 SMCJ75A SMCJ75CA GGR BGR 75.0 83.30 92.10 1 121.0 12.4 5 SMCJ78A SMCJ78CA GGT BGT 78.0 86.70 95.80 1 126.0 11.9 5 SMCJ85A SMCJ85CA GGV BGV 85.0 94.40 104.00 1 137.0 11.0 5 SMCJ90A SMCJ90CA GGX BGX 90.0 100.00 111.00 1 146.0 10.3 5 SMCJ100A SMCJ100CA GGZ BGZ 100.0 111.00 123.00 1 162.0 9.3 5 SMCJ110A SMCJ110CA GHE BHE 110.0 122.00 135.00 1 177.0 8.5 5 SMCJ120A SMCJ120CA GHG BHG 120.0 133.00 147.00 1 193.0 7.8 5 SMCJ130A SMCJ130CA GHK BHK 130.0 144.00 159.00 1 209.0 7.2 5 SMCJ150A SMCJ150CA GHM BHM 150.0 167.00 185.00 1 243.0 6.2 5 SMCJ160A SMCJ160CA GHP BHP 160.0 178.00 197.00 1 259.0 5.8 5 SMCJ170A SMCJ170CA GHR BHR 170.0 189.00 209.00 1 275.0 5.5 5 SMCJ180A SMCJ180CA GHT BHT 180.0 201.00 222.00 1 292.0 5.1 5 SMCJ200A SMCJ200CA GHV BHV 200.0 224.00 247.00 1 324.0 4.6 5 SMCJ220A SMCJ220CA GHX BHX 220.0 246.00 272.00 1 356.0 4.2 5 SMCJ250A SMCJ250CA GHZ BHZ 250.0 279.00 309.00 1 405.0 3.7 5 SMCJ300A SMCJ300CA GJE BJE 300.0 335.00 371.00 1 486.0 3.1 5 SMCJ350A SMCJ350CA GJG BJG 350.0 391.00 432.00 1 567.0 2.6 5 SMCJ400A SMCJ400CA GJK BJK 400.0 447.00 494.00 1 648.0 2.3 5 SMCJ440A SMCJ440CA GJM BJM 440.0 492.00 543.00 1 713.0 2.1 5 For bidirectional type having Vrwm of 10 volts and less, the IR limit is double. For parts without A (VBR is ± 10%). 275 www.littelfuse.com SILICON DIODE ARRAYS Silicon Avalanche Diodes 1500W Surface Mount Transient Voltage Supressors RoHS SMCJ Series Ratings and Characteristic Curves T =25˚C unless otherwise noted A 100 100 75 10 50 1 25 0.31x0.31"(8.0x8.0mm) Copper Pad Areas 0.1 0 0.1µs 1.0µs 10µs 100µs 1.0ms 10ms 0 25 50 75 100 125 150 175 200 T - Ambient Temperature (˚C) A t - Pulse Width (sec.) d Fig. 1 Peak Pulse Power Rating Fig. 2 Pulse Derating Curve 20000 150 10000 Measured at t =10µsec T =25˚C r J Zero Bias Pulse Width(td) is defined as the point where the peak Peak Value current decays to 50% of I PPM I PPM 100 1000 Half Value I PPM 2 V , Measured at R Stand-Off 100 Voltage, V 50 10/1000µsec. Waveform WM as defined by R.E.A T =25˚C J f=1.0MHZ Uni-Directional V =50mVp-p sig t Bi-Directional d 10 0 1.0 10 100 200 1.0 2.0 3.0 4.0 0 V -Reverse Stand-Off Voltage (V) WM Fig. 4- Typical Junction Capacitance Fig. 3 Pulse Waveform 100 200 100 10 1.0 8.3 Single Half Sine-Wave (JEDEC Method) Undirectional Only T =T J J MAX 0.1 10 0.001 0.01 0.1 1 10 100 1000 1 10 100 Number of Cycles at 60Hz t - Pulse Duration(sec) p Fig. 6- Maximum Non-Repetitive Peak Forward Surge Current Fig. 5- Typ. Transient Thermal Impedance 276 www.littelfuse.com Transient Thermal Impedance P - Peak Pulse Power (KW) PPM I - Peak Pulse Current, % I PPM RSM (˚C/W) Peak Pulse Power (P ) or Current (I ) PP PP I -Peak Forward Surge Current (A) C -Junction Capacitance (pF) J Derating in Percentage, % PSM Silicon Avalanche Diodes 1500W Surface Mount Transient Voltage Supressors RoHS SMCJ Series Package Outline Dimensions and Pad Layouts DO-214AB (SMC J-Bend) Cathode Band 0.245 (6.22) 0.220 (5.59) 6 0.280 (7.11) 0.260 (6.60) 0.012 (0.305) 0.006 (0.152) 0.103 (2.62) 0.079 (2.06) 0.008 (0.203) MAX 0.060 (1.52) 0.320 (8.13) 0.030 (0.76) 0.305 (7.75) Dimensions in inches and (millimeters) 277 www.littelfuse.com SILICON DIODE ARRAYS