PC/104-PLUS BRIDGE BOARD S-104P-B2I Features PCI-to-ISA Bridge 2 x FireWire IEEE1394 2 x COM Port Parallel Port Floppy Disk Adapter DiskOnChip socket User programmable FPGA I/O The S-104P-B2I board is an accessory board for PCI-104 CPU boards like the Cool RoadRunner 4. More Features It provides all standard legacy I/O devices for the CPU board, like two serial ports, a parallel Full DMA & IRQ support on port and a floppy controller. Its PCI-to-ISA bridge gives the user the possibility to use standard ISA bus PC/104 I/O boards together with a PCI-104 CPU board. Support for TCP/IP over Furthermore it adds two IEEE 1394 ports, utilizing a VIA6307 FireWire controller. IEEE1394 The serial ports can be configured with software to act as an RS232 or RS485/RS422 interface. SPP, EPP, ECP support on The necessary termination resistors in RS485/RS422 mode can be activated by setting parallel port jumpers. The parallel port supports all standard modes SPP, EPP and ECP, respectively. The FPGA design software floppy controller supports one 1.44 MB slim line floppy disk drive, which is connected using a available flex foil cable. All standard interfaces are located on 2.54 mm IDC headers. A cable set is available to provide the standard PC connectors. RS232/422/485 protocols The PCI-to-ISA bridge supports all data accesses to I/O or memory devices on the PC/104 bus. Interrupts and DMA are also supported. The DiskOnChip socket allows to add M-Systems DiskOnChip2000 modules as mass storage device. The DiskOnChip is located in a memory window of the CPU. The address range is selectable with software. The programmable Multi-I/O controller is a Xilinx Spartan XC2S15 FPGA device. It is fully connected to the ISA bus and can be programmed from the CPU board. A connector with twenty I/O signals from the FPGA can be used to interface to external hardware. This gives the user the ability to add specialized I/O functions like digital I/O, counters or other custom interfaces to the CPU board. The design software is available free of charge and may be downloaded from the Xilinx website. LiPPERT is an independent design house and manufacturer that develops and builds special customer specific solutions. Please ask for a quotation. LiPPERT GmbH · Hans-Thoma-Str. 11 · D-68163 Mannheim Phone +49 621 43214-0 · Fax +49 621 43214-30 sales@lippert-at.com · www.lippert-at.com PC/104-PLUS BRIDGE BOARD S-104P-B2I Technical Specifications Board Format PC/104-Plus, 90mm x 96mm, no wings FireWire 2 x IEEE1394 FireWire Controller VT6307 Super I/O SMSC FDC37B7271 PCI-to-ISA Bridge Winbond W83628F Programmable I/O Xilinx FPGA I/O levels: 3.3 V (5 V tolerant) Serial RS232/422/485, jumper selectable Printer LPT1 with SPP, EPP and ECP Floppy Disk 1.44 MB slimline drive support DiskOnChip Socket for DoC 2000 FPGA Software Freely avalable at www.xilinx.com Power Consumption t.b.d. Operating Standard: -20°C ... +60°C temperature Optional: -40°C ... +85°C MTBF > 100.000 hours at 30 °C Power Supply All necessary voltages are generated on-board. Supported OS All (transparent to the operating system) All mentioned trademarks are the properties of their respective holders. LiPPERT GmbH · Hans-Thoma-Str. 11 · D-68163 Mannheim Phone +49 621 43214-0 · Fax +49 621 43214-30 sales@lippert-at.com · www.lippert-at.com 05/06· Specifications subject to change without notice · ©LiPPERT GmbH · Printed in Germany