LIPPERT 805-0002-00
Specifications
BIOS
Phoenix FirstBIOS. The BIOS
Board Format
Mini-ITX, 170 mm x 170 mm
Cooling
Passive cooling possible
Core logic
i82855 GME, i82801 DB (ICH4)
CRT
Analog VGA
Ethernet
1 x 100/10 BaseT with i82801DB 1 x 1000 BaseT with i82541ER
Floppy
up to 2.88 Mbyte
FSB
400+ MHz
Graphics
Integrated i82855 graphics controller,1600 x 1200 at 85 Hz,2048 x 1536 at 75 Hz
IDE
4 independent drives Primary and Secondary ports Ultra ATA 100/66/33 Mbyte/s, PIO modes
Infrared
IrDA (SIR, Consumer IR) with TTL level to connect an external infrared transmitter
Keyboard, Mouse
PS/2 or USB
LPT
Multi-Mode bi-directional Parallel-Port IEEE 1284 compliant with EPP/EPC modes
LVDS
Dual channel 18-Bit interface for LCDs
MTBF
109.600 hours at 30 °C
Operating temperature
Standard: -20°C … +60°C,Extended: -40°C … +85°C(optionally available for the 1.4 GHz version)
PCI Bus
1 x Standard PCI slot, 3.3V, V2.2 compliant,1 x Mini-PCI slot, V1.0 compliant
Power Consumption(maximum)
1.4 GHz: ~19 W (with +5 V-only supply) 1.6 GHz: ~30 W 1.8 GHz: ~34 W
Power Supply
ATX, a +5 V only supply can be used optionally. All necessary voltages are
Processor
Intel Pentium M
RAM (max.)
1 GB DDR SDRAM (PC2700) One slot available
RAM clock
200 / 266 / 333 MHz
RTC Backup
Battery on board
Serial
2 x RS232C with hardware handshake
Sound I/O
AC97 2.3 (Line-in, Line-out, Mic-in)
Speed
1.4 / 1.6 / 1.8 GHz
Status LED
Power, Ethernet, IDE
Super I/O
NSC PC87364
Supported OS
Windows XP, Windows XPE, Windows CE, Linux
USB
6 x USB 2.0
Watchdog
Software configurable, 1s…255s
Features
- (software configurable)
- (V1.0 compliant)
- (V2.2 compliant)
- 1 x 3.3 V Mini-PCI slot
- 1 x 3.3 V PCI slot
- 6 x USB 2.0
- Battery buffered RTC
- Dual channel LVDS
- Fast Ethernet 100/10 BaseT
- Flash BIOS
- GB DDR-SDRAM
- Gigabit Ethernet 1000 BaseT
- High performance 3D graphics controller
- Intel Pentium M processor 7xx
- Opt. ext. temperature range @ 1.4 GHz
- Passive cooling possible
- Small power consumption
- Sound I/O AC97 compatible
- SXGA: 2048 x 1536 pixel
- Watchdog
Datasheet
Extracted Text
Thunderbird ® ® Mini-ITX board with Intel Pentium M 1.4/1.6/1.8 GHz Features ® ® Intel Pentium M processor 7xx GB DDR-SDRAM High performance 3D graphics controller SXGA: 2048 x 1536 pixel Dual channel LVDS Fast Ethernet 100/10 BaseT Gigabit Ethernet 1000 BaseT 6 x USB 2.0 Small power consumption Passive cooling possible Opt. ext. temperature range @ 1.4 GHz The Thunderbird is a compact, highly integrated low-power single board computer, in the Mini-ITX form factor. More Features At the core of the board is the Intel Pentium M processor running up to 1.8 GHz. The accompanying Intel 82855GME chipset features a high performance 3D graphics Sound I/O AC97 compatible controller with Intel Extreme Graphics-2, supporting dual independent displays. The Watchdog integrated display controller comes with up to 32 MB improved UMA VRAM and (software configurable) handles up to 2048 x 1536 pixels at 75 Hz. LCD screens can be connected with dual Flash BIOS channel LVDS. Battery buffered RTC The Thunderbird comes with floppy, PS/2 keyboard and mouse, two RS232 serial ports, Ultra ATA 100 EIDE and IrDA interface on-board. Networking capabilities are 1 x 3.3 V PCI slot provided by two LAN ports, one with Fast Ethernet (100/10 BaseT) and the other with (V2.2 compliant) Gigabit Ethernet (1000 BaseT), respectively. Six independent USB 2.0 ports and AC-97 1 x 3.3 V Mini-PCI slot Sound I/O are also integrated. In addition to a standard PCI slot, a mini-PCI connector is available for system expansion and can hold all types of mini-PCI modules. For (V1.0 compliant) instance, wireless LAN interfaces can easily plugged in. LiPPERT provides some specialized mini-PCI modules that add special functionality to the Thunderbird. See our web site for available types. The Thunderbird’s RAM is expandable with the single on-board DIMM socket that can hold 1024 MB DDR333 SDRAM. System integrity is assured with temperature and fan speed monitoring. The Thunderbird with the 1.4 GHz processor works with a +5 V-only supply and is optionally available for operation in the extended temperature range from -40 °C to +85 °C. LiPPERT is an independent design house and manufacturer that develops and builds special customer specific solutions. Please ask for a specific quotation. LiPPERT Embedded Computers GmbH LiPPERT Embedded Computers Inc. 5555 Glenridge Connector, Suite 200 Hans-Thoma-Str. 11 · D-68163 Mannheim Phone +49 621 43214-0 · Fax +49 621 43214-30 Atlanta, GA 30342 Phone (404) 459 2870 · Fax (404) 459 2871 sales@lippertembedded.com www.lippertembedded.com ussales@lippertembedded.com Thunderbird ® ® Mini-ITX board with Intel Pentium M 1.4/1.6/1.8 GHz Technical Specifications LPT Multi-Mode™ bi-directional Parallel- Board Format Mini-ITX, 170 mm x 170 mm Port IEEE 1284 compliant with EPP/ EPC modes Processor Intel Pentium M IDE 4 independent drives Primary and Speed 1.4 / 1.6 / 1.8 GHz Secondary ports Ultra ATA 100/66/33 Mbyte/s, FSB 400+ MHz PIO modes Core logic i82855 GME Sound I/O AC97 2.3 (Line-in, Line-out, Mic-in) i82801 DB (ICH4) Super I/O: NSC PC87364 RTC Backup Battery on board RAM (max.) 1 GB DDR SDRAM (PC2700) Watchdog Software configurable, 1s…255s One slot available RAM clock 200 / 266 / 333 MHz Power 1.4 GHz: ~19 W (with +5 V-only Consumption supply) (maximum) 1.6 GHz: ~30 W Graphics Integrated i82855 graphics controller 1.8 GHz: ~34 W 1600 x 1200 at 85 Hz 2048 x 1536 at 75 Hz Operating Standard: -20°C … +60°C temperature Extended: -40°C … +85°C CRT Analog VGA (optionally available for the 1.4 GHz version) LVDS Dual channel 18-Bit interface for LCDs MTBF 109.600 hours at 30 °C Floppy up to 2.88 Mbyte Cooling Passive cooling possible Serial 2 x RS232C with hardware handshake Status LED Power, Ethernet, IDE Infrared IrDA (SIR, Consumer IR) with TTL PCI Bus 1 x Standard PCI slot, 3.3V level to connect an external infrared V2.2 compliant transmitter 1 x Mini-PCI slot, V1.0 compliant USB 6 x USB 2.0 Power Supply ATX, a +5 V only supply can be used optionally. All necessary voltages are Ethernet 1 x 100/10 BaseT with i82801DB generated on-board. 1 x 1000 BaseT with i82541ER BIOS Phoenix FirstBIOS. The BIOS Keyboard, Mouse PS/2 or USB parameters are also saved in FEPROM ® ® Supported OS Windows XP, Windows XPE, ® ® Windows CE, Linux Ordering Information Ordering Number Description ® ® Mini-ITX board with socketed 1.8 GHz Intel Pentium M 745, active cooler, max. 1GB DDR-RAM, 6xUSB, IrDA, RTC, 805-0002-11 Battery, FDC , 2xIDE, 2xCOM, LPT, PS/2 keyboard and mouse, watchdog, PCI slot, miniPCI slot, 1x Fast Ethernet, 1x Gigabit Ethernet, LVDS, AC97 sound, ATX power connector sound, S/PDIF, ATX power connector ® 805-0002-10 Like 805-0002-11 but with 1.6 GHz Pentium M ® t05-0001-10 Like 805-0002-10 but with soldered 1.4 GHz Pentium M 738, passive cooler and 5 volt single voltage supply Note: t denotes the temperature range. Substitute with 8 for standard and 9 for extendend temperature range LiPPERT Embedded Computers GmbH LiPPERT Embedded Computers Inc. 5555 Glenridge Connector, Suite 200 Hans-Thoma-Str. 11 · D-68163 Mannheim Phone +49 621 43214-0 · Fax +49 621 43214-30 Atlanta, GA 30342 Phone (404) 459 2870 · Fax (404) 459 2871 sales@lippertembedded.com www.lippertembedded.com ussales@lippertembedded.com 01/09· Specifications subject to change without notice · ©LiPPERT Embedded Computers GmbH · Printed in Germany All mentioned trademarks are the properties of their respective holders.
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the 805-0002-00 have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
Related Products

Lippert 802-0008-10 Cool LiteRunner-LX800 PC/104 CPU board with AMD Geode-LX800@0.9W, Industrial tem...
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods