DSTni EX System on Chip The DSTni EX System on a Chip (SOC) is a high performance, highly integrated single chip running at 30 MIPS at the maximum clock speed. The EX integrated 16- bit processor (x86) has be enhanced with a maximum memory space of 16M bytes, many on-chip internal peripherals, 256K bytes of on-chip SRAM, and a single clock instruction execution. The DSTni EX is used in many memory can add external Providing quality high performance networking SRAM, FLASH, or SDRAM to applications as the main bring the total memory up to Network products processor with its integrated 16M bytes. memory and Ethernet, USB, and and the best service serial ports. The Lantronix XPort, The two integrated 10/100 to our customers. WiPort, and MatchPort are based Ethernet channels and one on the DSTni EX chip. integrated Ethernet PHY allow • Chips for a minimum chip count  Modules The DSTni EX is designed for design. The smallest EX design high performance; old x86 designs requires the EX, a serial Flash,  Software can be ported to the EX with a and a crystal/oscillator.  Products minimum of changes. The EX chip runs the same opcodes as Grid Connect (formerly the Intel/AMD 80186 family of Lantronix) and Lantronix provide chips, but faster! the DSTni EX chip and development kits along with With the EX’s on chip peripherals complete technical support and and on chip SRAM the the DSTni OS royalty free applications that can run in 256K operating system. bytes can all be on chip. Applications that require more DSTni EX Evaluation Kit $349 (simple board, 14 day Paradigm DSTni EX SW, Cables, Power Supply, CD w/ DSTni OS and examples) System on a Chip Features • SOC 16 bit 30MIPs Processor • 25-128Mhz software controlled PLL • Intel/AMD x186 compatible • On Chip Memory and Peripherals ¾ 256K bytes SRAM ¾ 2x 10/100M Ethernet MACs ¾ 1x 10/100M Ethernet PHY ¾ 4x UARTs rates up to 920K ¾ SPI, I2C DSTni EX Development Kits (full board, Full Paradigm SW, JTAG ¾ 2x CAN controllers Emulator, Cables, Power Supply, CD w/ DSTni OS and examples) ¾ 1x USB 1.1 host/slave controller ¾ SDRAM controller ¾ 3 timers, 1 watchdog timer ¾ 4 DMA channels ¾ JTAG, break point, trace registers ¾ Interrupt controller • Boot controller (SPI, Flash, Serial or Ethernet) • 12mm x 12mm 184 pin BGA, RoHS (lead free) • Wide temperature range –40 to 85 degrees C • 1.8V core, 2.5V I/O Part Numbers: • .18 micron technology GC-EX-184B-LF DSTni EX chip, BGA, RoHS • TSMC Foundry GC-DK-EX Evaluation Kit • Guaranteed Life Cycle GC-DK-EX3 Development Kit w/o JTAG Emulator • Includes DSTni OS royalty free GC-DK-EX4 Development Kit with JTAG Emulator operating system