Manufacturers
LANNER ELECTRONICS EM-351B
Description
Lanner Electronics EM-351B CPU Board. NS Geode GX1-300 MHz CPU | VGA | LCD | Dual LAN | Audio | TV Out | GPS Header | CompactFlash | COM/Parallel Ports - Rev. B
Part Number
EM-351B
Price
Request Quote
Manufacturer
LANNER ELECTRONICS
Lead Time
Request Quote
Category
PRODUCTS - E
Specifications
BIOS
256KB Award license BIOS
Chipset
NS Geode CS5530A, Realtek RTL8139C, Winbond 83977 and 83977 I/O chipsets, CHRONTEL CH7003B TV Encoder, AD1881 Audio CODEC
Dimensions
145 x 102 mm (5 3/4" x 4")
Ethernet
Two Realtek RTL8139C, support Dual-10/100 Base-T interface
FSB
One FDD port, support one floppy device
GPIO
Reserved Header for GS Kit
IDE Interface
One PCI IDE port, support up to two IDE devices. Supports PIO mode 2 and Bus Master. Also supports Multi-word DMA and Ultra DMA/33
IR Interface
Support 1 IrDA header
Keyboard & Mouse
1 x 6-pin mini-DIM PS/2 keyboard/mouse connector
Memory
One SODIMM socket, support up to 128MB SDRAM
Operating Humidity
5% ~ 95%, non-condense
Operating Temperature
0C ~ 60C
Parallel Port
two multi-mode parallel port (SPP/EPP/ECP)
Power Management
I/O peripheral devices support power saving and doze/standby/suspend modes. APM 1.2 compliant
Processor
AMD Geode
On-board NS Geode 200/233/266/300 MHz low power CPU (default 233MHz/1.8V)
RTC
Internal RTC with Li Battery
Serial Port
Four COM ports (3 x RS-232 and 1 x RS-232/422/485)
Storage Temperature
-10C ~ 70C
USB
Support 2 USB ports
WTD
NS Geode CS5530A, shared memory 2MB, resolution up to 1024x768 @ 64K colors
Features
- 3.5" EmbeddedATX Form Factor
- Built-in VGA/LCD/TV and sound functions, support multimedia application
- Four COM port, two parallel port, one PCI IDE por
- NS CS5530A, display memory shared with system memory 2MB, resolution up to 1024x768
- On-board Low-power CPU (NS Geode GX1-200/233/266/300 MHz)
- One CompactFlash socket, support ATA mode
- One SODIMM Socket, support up to 128MB of SDRAM
- Socket for DiskOnChip fro M-System, support up to 144MB flash memory disk
- Two Realtek RTL8139C, support Dual-10/100 Base-T Ethernet interface
Datasheet
Extracted Text
PCM-6896 ® Socket 370 based Pentium III / ® Celeron Processor Features ® ® Supports Socket 370 based Intel Pentium III / CFD slot (back) ® Celeron Processor COM port pin header PC/104 + socket ® Onboard Intel 815E controller supports 18/24/36/48-bit TFT panels (Through DVO K/B & Mouse module) pin header 10/100Base-T Fast Ethernet FDD Connector ® Supports both DiskOnChip and Type II printer port CompactFlash™ Memory pin header Four USB Ports 40 pin IDE connector USB pin headers Audio pin header power input PCI slot connector DVO pin header CRT pin RJ-45 Ethernet header Connector Specifications ® System Audio Intel 815E ALC 201 Codec, AC-97, Mic in, Line in, Line out, CD Audio in ® CPU Socket 370 based Pentium III Processor/ USB Two 5x2 pin headers support 4 USB 1.1 ports ® Celeron Processor (.18 /.25 ) up to 1GHz Digital I/O 4 TTL digital input bits & 4 TTL digital output bits (with system bus frequencies of 66/100/133) System Memory SDRAM DIMM x 1, Max.512MB Display (PC-100/133) ® ® Chipset Intel 815E+ICH2 Chip Intel 815E, AGP 2X 3D Engine I/O Chipset ITE 8712. Fully 16-bit I/O decoded. Winbond Memory Size Shared system memory up to 4MB W83977EF as 2nd SIO for COM3, COM4 port. Resolution up to 1600 x 1200@24bpp colors for CRT BIOS Award 256KB FLASH ROM LCD Interface up to 18/24/36/48-bit TFT LCD. Requires TTL or ® Ethernet Intel 815E, 10/100Base-T RJ-45 LVDS modules connector x 1 ® SSD Supports DiskOnChip up to 1GB, Packing List Type II CompactFlash Socket. Watchdog timer Generate a system reset, IRQ15 or NMI. Jumper Cap 9657666600 Expansion Interface PCI slot x 1, PC/104+ socket x 1 Quick Installation Guide Battery Lithium Battery Utility CD H/W status monitoring Supports power supply voltages and temperatures monitoring Power supply voltage +5V (4.75V to 5.25V), +12V (11.4V to 12.6V), +3.3V, -5V, -12V, -3.3V, ATX / AT. Size/Weight 8" (L) x 5.75" (W) (203mm x 146mm) 1.2lb. (0.5kg) Operating temperature 32 ~ 140 (0 ~60 ) I/O MIO IDE (UDMA100) x 1, FDD x 1, KB+Mouse x 1, RS-232 x 3, RS-232/422/485 x 1, Parallel x 1. IrDA One IrDA Tx/Rx header 1-4 1-4 1-4 All specifications are subject to change without notification. All specifications are subject to change without notification.
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the EM-351B have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Lanner Electronics EM-351A Single Board Computer - NS Geode GX1-300 MHz CPU, VGA, LCD, Dual LAN, Aud...
Lanner Electronics EM370 EBX 5.25 CPU Board with Socket 370, Intel 440 System Chipset, LCD/VGA, Real...
5.25 inch Socket 370 Tualatin SBC with VGA and Four LAN
Lanner Electronics EMS200BNPKFA System -Embedded system with GX1 300MHz CPU SBC
350W ATX P/S with PFC for 1U chassis
Lanner Electronics EVR-3006P2 300W ATX Mini-Redundant Power Supply with PFC
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods