Manufacturers
LAMBDA TL
Description
Lambda TL Series 500 to 2500W Front End Power Supplies
Part Number
TL
Price
Request Quote
Manufacturer
LAMBDA
Lead Time
Request Quote
Category
PRODUCTS - T
Datasheet
Extracted Text
TL Series 500 to 2500W Front End Power Supplies 2U high Up to 12,500W in 19" rack Hotswap capable >90% efficiency Full power at 65°C ambient Key Market Segments & Applications Power for Distributed Power Architecture Factory Automation TL Features and Benefits Feature Benefit 2U high Utilizes less cabinet space Hotswap capable Suitable for N+1 redundancy High efficiency Higher density Full array of signals Easier system monitoring Specifications MODEL 12V Nominal 24V Nominal 48V Nominal ITEMS (Factory Set) (Factory Set) (Factory Set) Output Voltage Range (1) VDC 10.5-14V 21 - 28V 42 - 56V Total Regulation % ±1 Current limit % 105 to 120%, Factory Programmable Short Circuit Current % 150% maximum, Factory Programmable Output Noise mV 480mV maximum, peak to peak (10Hz to 20MHz) Output Rise Time - 100 - 400ms Dynamic Response - 3% in 10ms for a 10 - 100% load change Overvoltage Protection (4) VDC 13.5 to 15V 27 to 30V 54 to 60V Load sharing - ±10% Remote Sense - Compensates for 1V total cable drop (stand alone unit only) I2C programming (1) - Set Output Volt., Monitors AC Present, Converter OK, Thermal profile, Fan fail Signals (opto isolated) (2) - Converter OK, AC Present, and Over-temperature alarms. Active Low on Fail Remote On/Off (3) - Shuts down output(s) by applying 5V Margining - Applying 0-5V raises output voltage 0-10V Auxiliary Output - 12V 0.1A bias voltage AC Input - TL500-1000: 90~264VAC, 95VAC start up; TL1500-2500: 180~264VAC, 185VAC start up Power Factor - 0.99 Typical meets EN61000-3-2 Inrush Current A <40A Leakage Current mA <3.2mA Efficiency (typical) % 92% Immunity - EN61000-4-2, -3, -4, -5, -6, -8 EMC (conducted and radiated) - EN55022, level B, FCC Class B Operating Temperature - -40°C to +65°C, short duration at 75°C, no derating (TL250048: -40°C to 65°C) Storage Temperature - -40 to +85°C Humidity - 5 - 95% RH non condensing Altitude - -200 to 8000 feet, derate max. ambient 2°C/1000 feet Shock - IEC68-2-27, MIL STD 810E, 20G Vibration - IEC68-2-64 (random) 20 - 200Hz, 30 minutes Safety Agency (5) - UL60950, CSA 22.2 No. 60950-00, EN60950, CE Mark Size (L x W x H) - 11.12” x 3.41” x 3.45” (stand alone), 14” x 18.9” (incl. ears) x 3.45" (TLR5 rack) Weight lbs Stand alone unit: 5.6lbs, Rack: 9.5lbs Warranty - Two Years (1) Contact Factory for application (3) Either stand alone unit or entire rack (2) All three signals share a common return - Logic GND (4) Factory Programmable (5) Use cable assembly TLRC01 for safety compliance 3055 Del Sol Blvd • San Diego, CA 92154 • 1-800-LAMBDA-4 TL Series TL Rack Outline Drawing TL Module Outline Drawing Output Connector (Module) Models Output Output Maximum TL Module Connector (Part Number: FCI 51732-007) Model Voltage Current Power DC B A TL50012 12V 40A 500W 6 Converter OK 12VAux SCL SDA TL75012 12V 60A 750W 5 Logic GND n/c Reserved Overtemp TL50024 24V 20A 500W 4 AC Present Reserved n/c LOC0 TL100024 24V 40A 1000W 3 Present n/c LOC1 LOC2 TL150024 24V 55A 1500W 2 Remote on/off Short Pin n/c I Share TL50048 48V 10A 500W 1 +Remote Sense -Remote Sense n/c V Margin TL100048 48V 20A 1000W P2 Negative Output TL150048 48V 30A 1500W P1 Positive Output TL200048 48V 40A 2000W TL250048 48V 50A 2500W Note: View facing rear of module TLR5 19” Rack, holds up to 5 TL Modules TLRBP Blanking Panel for One Module Slot TLRC01 Signal Cable Output Signal Connector (Rack) TLCK I2C Communications Kit TL Rack Connector (Part Number: Molex 43045) TLHB19* Angled Baffle Kit (for horizontal air flow) 1 12V Aux 11 Signal GND Other Lambda Industrial Products 2 SCL 12 I Share 3 SDA 13 V Margin X, SX, PAQ, PAH, PAF DC-DC Converters 4 Logic GND 14 n/c JWS, JFS, LZS 50W to 2000W Single and triple output 5 Remote on/off 15 Overtemp 6 AC Present (Bay 1) 16 Converter OK 1 For Additional Information, please visit 7 AC Present (Bay 2) 17 Converter OK 2 www.lambdapower.com/products/tl-series.htm 8 AC Present (Bay 3) 18 Converter OK 3 9 AC Present (Bay 4) 19 Converter OK 4 10 AC Present (Bay 5) 20 Converter OK 5 Note: 1. Pin 1 is top left, view from rear of rack Pin 11 is bottom left, view from rear of rack 2. Module Bay 1 is far left of rack, view from front 3055 Del Sol Blvd • San Diego, CA 92154 • 1-800-LAMBDA-4 Revision A9: June 2005
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the TL have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods