F2-04THM - KOYO - Elite.Parts

Description

Koyo F2-04THM - Thermocouple or 16 bit Voltage 4 Point

Part Number

F2-04THM

Price

Request Quote

Manufacturer

KOYO

Lead Time

Request Quote

Category

TBD

Specifications

Absolute Maximum Ratings

Fault-protected inputs to ±50 VDC

Accuracy vs. Temperature

±5 ppm/ºC maximum full scale calibration (including maximum offset change)

Base Power Required 5VDC

110 mA

Common Mode Range

±5 VDC

Common Mode Rejection

90 dB min. @ DC, 150 dB min. @ 50/60 Hz.

Digital Input Points Required

32 (X) input points (16 binary data bits, 2 channel ID bits, 4 diagnostic bits)

Environmental Air

No corrosive gases permitted

External Power Supply

60 mA maximum, 18 to 26.4 VDC

Input Impedance

1 M

Noise Immunity

NEMA ICS3-304

Number of Channels

4, differential

Operating Temperature

32º to 140ºF (0º to 60ºC)

PLC Update Rate

4 channels per scan max. D2-240/250(-1)/D2-260 CPU, H2-EBC(-F); 1 chan. per scan max. D2-230 CPU

Relative Humidity

5 to 95% (non-condensing)

Shock

MIL STD 810C 516.2

Storage Temperature

-4º to 158ºF (-20º to 70ºC)

Terminal Type

(included) Non-removable

Vibration

MIL STD 810C 514.2

Features

Automatically converts type E, J, K, R, S, T, B, N, or C thermocouple signals into direct temperature readings. No extra scaling or complex conversion is required.
Diagnostic features include detection of thermocouple burnout or disconnection.
Four thermocouple input channels with 16-bit voltage resolution or 0.1 _C/_F temperature resolution.
Module can be configured as ?5V, ?156mV, 0--5V or 0--156 mV and will convert volts and millivolt signal levels into 16-bit digital (0--65535) values.
Signal processing features include automatic cold junction compensation, thermocouple linearization, and digital filtering.
Temperature data can be expressed in _For _C.
The temperature calculation and linearization are based on data provided by the National Institute of Standards and Technology (NIST).

Datasheet

F2-04THM-m-1130755114n.pdf

481 KiB

Download

Extracted Text

ADC Analog Mux ADC Analog Mux Company Temperature Input Modules Information Systems Overview F2-04THM 4-Channel Thermocouple In <---> Programmable General Specifications Thermocouple Specifications Controllers 4, differential Number of Channels Type J -190 to 760ºC -310 to 1400ºF Type E -210 to 1000ºC -346 to 1832ºF Common Mode Range ±5 VDC Field I/O Type K -150 to 1372ºC -238 to 2502ºF 90 dB min. @ DC, 150 dB min. @ 50/60 Hz. Type R 65 to 1768ºC 149 to 3214ºF Common Mode Rejection Software Input Ranges Type S 65 to 1768ºC 149 to 3214ºF 1 M� Input Impedance Type T -230 to 400ºC -382 to 752ºF C-more & Type B 529 to 1820ºC 984 to 3308ºF Absolute Maximum Ratings Fault-protected inputs to ±50 VDC other HMI Type N -70 to 1300ºC -94 to 2372ºF ±5 ppm/ºC maximum full scale calibration Type C 65 to 2320ºC 149 to 4208ºF Accuracy vs. Temperature Drives (including maximum offset change) Display Resolution ±0.1ºC or ±0.1ºF 4 channels per scan max. Soft Automatic Cold Junction Compensation PLC Update Rate D2-240/250(-1)/D2-260 CPU, H2-EBC(-F); Starters 1 chan. per scan max. D2-230 CPU Conversion Time 100 ms per channel Motors & 32 (X) input points (16 binary data bits, Gearbox Digital Input Points Required Warm-Up Time 30 minutes typically ± 1ºC repeatability 2 channel ID bits, 4 diagnostic bits) ±.05ºC maximum, ±.01ºC typical Linearity Error (End to End) Steppers/ External Power Supply 60 mA maximum, 18 to 26.4 VDC Servos ±3ºC (excluding thermocouple error) Maximum Inaccuracy Base Power Required 5VDC 110 mA Motor Voltage Input Specifications 32º to 140ºF (0º to 60ºC) Operating Temperature Controls Voltage Ranges 0-5V, ±5V, 0-156.25 mV, ±156.25 mVDC Storage Temperature -4º to 158ºF (-20º to 70ºC) Proximity Resolution 16 bit (1 in 65535) Sensors Relative Humidity 5 to 95% (non-condensing) Full Scale Calibration Error No corrosive gases permitted Environmental Air ±13 counts typical ±33 maximum Photo (Offset Error Included) Sensors Vibration MIL STD 810C 514.2 Offset Calibration Error ±1 count maximum, @ 0V input Limit Shock MIL STD 810C 516.2 Switches ±1 count maximum Linearity Error (End to End) NEMA ICS3-304 Noise Immunity Maximum Inaccuracy ±.02% @ 25ºC (77ºF) Encoders Non-removable Terminal Type (included) Notes: Current 1: Terminate shields at the respective signal source. Sensors CPU Firmware Required 2: Connect unused channels to a common terminal (0V, CH4+, CH4). CPU Firmware Required Pressure 3: When using 0-156 mV and 5V ranges, connect (-) or (0) volts terminal to 0V to Sensors V1.06 D2-230 ensure common mode range acceptance. D2-240 V2.5 Temperature 4. This module is not compatible with the ZIPLink wiring system. D2-250 V1.06 Sensors All firmware versions work D2-250-1, D2-260 Pushbuttons/ Lights Process Thermocouple input wiring diagram Voltage input wiring diagram IN TEMP Relays/ Timers See Notes 1 and 2 VO LT See Notes 2 and 3 CH1+ Comm. CH1+ CH1 Voltage CH1 Terminal Transmitter F2--04THM Examples of differential Blocks & thermocouple wiring Wiring CH2+ CH2+ CH2 Voltage Power CH1+ CH2 Transmitter CH1 CH3+ Circuit CH2+ CH3+ Protection CH3 CH2 Voltage CH3 Transmitter CH3+ Examples of grounded Enclosures CH3 thermocouple wiring + CH4+ Transmitter CH4+ Module S upply CH4+ S upply -- Tools CH4 CH4 CH4 24 +24V VDC Pneumatics +24VDC 0V +24VDC 0V 24 Appendix 0V VDC Module S upply Product 0V 0V Index Part # Index Volume 13 www.aut o ma tiondirect.com/dl205 Programmable Controllers e4-103 HERE Power Requirements Power Supplied These charts help Device Price 5V(mA) 24V Auxiliary Device Price 5V(mA) 24V Auxiliary determine your power Bases Bases requirements D2-03B-1 <---> 2600 300 D2-06BDC1-1 <---> 2600 None D2-03BDC1-1 <---> 2600 None D2-06BDC2-1 <---> 2600 300 This section shows the amount of power D2-04B-1 <---> 2600 300 D2-09B-1 <---> 2600 300 supplied by each of the base power D2-04BDC1-1 <---> 2600 None D2-09BDC1-1 <---> 2600 None supplies and the amount of power consumed by each DL205 device. The D2-06B-1 <---> 2600 300 D2-09BDC2-1 <---> 2600 300 Power Consumed charts list how much Power Consumed Power Consumed INTERNAL power from each power source is required for the DL205 devices. Use this Device 5V(mA) 24V Auxiliary Device 5V(mA) 24V Auxiliary information when calculating the power Analog Modules CPUs budget for your system. F2-04AD-1 100 5 D2-230 120 0 In addition to the internal power sources, F2-04AD-2 110 5 D2-240 120 0 the DL205 bases offer a 24 VDC auxiliary D2-250-1 330 0 F2-08AD-1 100 5 power supply with external power connec- D2-260 330 0 F2-08AD-2 100 5 tions. This auxiliary power supply can power external devices. H2-WPLC*-** 680 0 F2-02DA-1 40 60 (note 1) F2-02DA-1L 40 70 @ 12V (note 1) DC Input Modules Use ZIPLinks to reduce F2-02DA-2 40 60 D2-08ND3 50 0 F2-02DA-2L 40 70 @ 12V power requirements D2-16ND3-2 100 0 D2-32ND3 25 0 F2-02DAS-1 100 50 / channel If your application requires a lot of relay F2-02DAS-2 100 60 / channel outputs, consider using the ZIPLink AC or D2-32ND3-2 25 0 F2-08DA-1 30 50 (note 1) DC relay output modules. These modules AC Input Modules can switch high current (10A) loads F2-08DA-2 60 140 D2-08NA-1 50 0 without putting a load on your base power F2-4AD2DA 60 80 (note 1) D2-08NA-2 100 0 budget. Refer to the Terminal Blocks and F2-8AD4DA-1 35 100 (note 1) D2-16NA 100 0 Wiring Solutions section in this catalog for F2-8AD4DA-2 35 80 (note 1) more information. Input Simulator Module F2-04RTD 90 0 This logo is placed next to the I/O F2-08SIM 50 0 F2-04THM 110 60 modules that are supported by the ZIPLink DC Output Modules connection systems. See the I/O module Specialty Modules D2-04TD1 60 20 specifications at the end of this section. D2-CTRINT 50* 0 D2-08TD1 100 0 D2-CM / D2-EM 100/130 0 D2-08TD2 100 0 H2-CTRIO 400 0 D2-16TD1-2 200 80 D2-DCM 300 0 D2-16TD2-2 200 0 F2-DEVNETS 160 0 F2-16TD1P 70 50 F2-SDS-1 160 0 F2-16TD2P 70 50 H2-PBC 530 0 D2-32TD1 350 0 H2-EBC(-F) 450, (640) 0 D2-32TD2 350 0 H2-ECOM(-F) 450, (640) 0 Power Consumed AC Output Modules H2-ECOM100 300 0 Device 5V(mA) 24V Auxiliary D2-08TA 250 0 F2-CP128 235 0 F2-08TA 250 0 Operator Interface Remote I/O D2-12TA 350 0 DV-1000 150 0 H2-ERM(-F) 320, (450) 0 Relay Output Modules C-more Micro- 210 0 D2-RMSM 200 0 Graphic D2-04TRS 250 0 D2-RSSS 150 0 D2-08TR 250 0 Programming Devices F2-08TR(S) 670 0 D2-HPP 200 0 D2-12TR 450 0 *requires external 5VDC for outputs Note 1: Add an additional 20 mA per output loop. Combination In/Out Module D2-08CDR 200 0 Volume 13 Programmable Controllers 1-800-633-0405 e4-46

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products