Rectangular type APS-10 to 15 Series From an ultra-thin design to an operating distance of 15 mm, wide-ranging rectangular types are available to meet diversified requirements. Types DC voltage output type/DC 3-wire type Shape Operating distance (mm) Output type Model number Remarks DC voltage APS-10-4T Front face sensing NPN N.O. APS-10-4N DC voltage APS-11-4T Upper face sensing NPN N.O. APS-11-4N 4 DC voltage APS-12A-4T NPN N.O. APS-12A-4N Non-embedded type DC voltage APS-13-4T Front face sensing Frequency classification NPN N.O. APS-13-4N model available DC voltage APS-13-7T 7 NPN N.O. APS-13-7N Front face sensing DC voltage APS-14-15T Frequency classification model available (“L” is added NPN N.O. APS-14-15N at the end of model number) 15 Side face sensing NPN N.O. APS-15-15N Frequency classification model available (“L” is added at the end of model number) * Frequency classification models (L) are non-stock products. 79 CS APS-CU APS-10 15 APS-F/U APS-S/M APS-CK APS-30/31 APS-GK APS-GM APS-GMD APS-GMC Output type Rectangular type APS-10 to 15 Series DC Voltage Output Type / DC 3-wire, Non-embedded Type Effective operating distance 4 mm 10% 4 mm 10% 4 mm 10% Dimensions (mm) Frequency classification model Remarks Front face sensing Upper face sensing available Model number APS-10-4T APS-11-4T APS-12A-4T DC voltage Price ¥2,800 ¥2,800 ¥2,020 Model number APS-10-4N APS-11-4N APS-12A-4N NPN NO Price ¥2,800 ¥2,800 ¥2,500 T type DC+12 V (+10 to +16 V) Permissible ripple rate: 3%p-p or less Rated DC+24 V (+20 to +30 V) operating Production in/before March 2000: +24 VDC (+20 to +28 V), permissible ripple rate: 3%p-p or less N type Permissible ripple rate: 3%p-p or less voltage Production in/after April 2000: +12/24 VDC (+10 to +30 V), permissible ripple rate: 3%p-p or less No-load current 15 mA or less 10 mA or less Standard target object (mm) Iron 20 20 1t Rated operating distance 0 to 2.8 mm Responding material Iron/nonferrous metal (operating distance varies with material) Differential travel Approx. 10% T type 300 Hz 1 kHz Switching frequency N type 100 Hz 1 kHz T type Output impedance: 3.3 k (output standard: 4P4N) Production in/before March 2000: 60 mA max (load voltage: 40 V or less) 100 mA (+40˚C) Output N type Production in/after April 2000: 100 mA max at +12 VDC (load voltage: 40 V or less) 80 mA (+50˚C) Rated operating current 200 mA max at +24 VDC (load voltage: 40 V or less) (load voltage: 50 V or less) Voltage drop 1.0 V or less Leakage current 300 A or less Operation indication Indicator lamp T type: -25 to +60˚C Operating temperature -10 to +50˚C N type: -10 to +50˚C Temperature characteristics Within 20% (of operating distance at +20˚C) Withstand voltage 500 VAC, 50/60 Hz (1 minute) Insulation resistance 5 M or higher (500 VDC) Vibration resistance Double amplitude: 1.5 mm, 10 to 55 Hz (2 hours in each of X, Y and Z directions) 2 Impact resistance 300 m/s , within 11 ms (10 cycles in each of X, Y and Z directions) Protection grade IP67 *1 Casing material PBT resin Polycarbonate Oil-resistant vinyl chloride cable 1.5 m Oil-resistant vinyl chloride cable 1 m Lead wire 2 2 Outer diameter (ş4), 0.3 mm 3-wire Outer diameter (ş4), 0.3 mm 3-wire Tightening torque 0.5 Nm or less 0.4 Nm or less Weight Approx. 50 g * The frequency classification models have “L” at the end of its model number (non-stock product). *1: To be changed to PBT resin. 80 CS APS-CU APS-10 15 APS-F/U APS-S/M APS-CK APS-30/31 APS-GK APS-GM APS-GMD APS-GMC Output type Rectangular type APS-10 to 15 Series DC Voltage Output Type / DC 3-wire, Non-embedded Type Effective operating distance 4 mm ±10% 7 mm ±10% 15 mm ±15% Dimensions (mm) Front face sensing Front face sensing (detection plane A) (detection plane B) Remarks Frequency classification model available Frequency classification Frequency classification model available model available Model number APS-13-4T APS-13-7T APS-14-15T DC voltage Price ¥3,680 ¥3,680 ¥5,150 Model number APS-13-4N APS-13-7N APS-14-15N APS-15-15N NPN NO Price ¥4,900 ¥5,310 ¥6,120 ¥6,120 Rated T type DC+12 V (+10 to +16 V) Permissible ripple rate: 3%p-p or less operating N type DC+24 V (+20 to +30 V) Permissible ripple rate: 3%p-p or less voltage No-load current T type: 15 mA or less N type: 10 mA or less Standard target object (mm) Iron 20 × 20 × 1t Iron 30 × 30 × 1t Iron 50 × 50 × 1t Rated operating distance 0 to 2.8 mm 0 to 4.9 mm 0 to 10.5 mm Responding material Iron/nonferrous metal (operating distance varies with material) Differential travel Approx. 10% T type 250 Hz 200 Hz Switching 100 Hz frequency N type 300 Hz 100 Hz T type Output impedance: 1.8 kΩ (output standard: 7P6N) Output N type 300 mA (+40˚C or less) 200 mA (+50˚C or less) (load voltage: 50 V or less) Rated operating current Voltage drop 2.4 V or less Leakage current 800 µA or less 300 µA or less Operation indication Indicator lamp Operating temperature -10 to +50˚C Temperature characteristics Within ±20% (of operating distance at +20˚C) Withstand voltage 500 VAC, 50/60 Hz (1 minute) Insulation resistance 5 MΩ or higher (500 VDC) Vibration resistance Double amplitude: 1.5 mm, 10 to 55 Hz (2 hours in each of X, Y and Z directions) 2 Impact resistance 300 m/s , within 11 ms (10 cycles in each of X, Y and Z directions) Protection grade IP66 *1 Casing material PBT resin Polycarbonate Oil-resistant cable 1.5 m Lead wire 2 Outer diameter (ş6), 0.5 mm 3-wire Tightening torque 0.8 Nm or less Weight Approx. 150 g * The frequency classification models have “L” or “H” (“L” only for APS-1/APS-15) at the end of its model number (non-stock product). *1: To be changed to PBT resin. 81 CS APS-CU APS-10 15 APS-F/U APS-S/M APS-CK APS-30/31 APS-GK APS-GM APS-GMD APS-GMC Target object Target object Target object Rectangular type APS-10 to 15 Series Present Not Connection/Operation () present Target object Proximity ON Brown sensor OFF Output + Black DC voltage output typet -T ON – Operation OFF Blue indication Proximity ON Brown sensor OFF Output + Black DC 3-wire type NPN output -N ON – Operation OFF Blue indication Note: indicates a load. Installation and Influence of Surrounding Metals (in mm) ● Placed in parallel with ● Placed in parallel with ● Placed in the hole of ● A metallic object is ● Two sensors are ● Placed to face each a metallic infinite plane a metallic plane as far a window-shaped placed in front of the placed in parallel with other as the detection plane metallic object sensor each other Installation Target object ** Target Target object object D1 C A B Model number D D2 APS-10-4... 10 6 25 10 30 40 APS-11-4... 10 6 25 10 30 40 APS-12A-4... 13 10 35 10 40 50 APS-13-4... 13 11 35 10 40 50 APS-13-7... 18 15 50 18 70 90 25 17.5 70 35 150 200 APS-14-15... APS-15-15... 25 17.5 70 35 150 200 * Position of the target object for an upper face sensing model ● If a metallic object is present near the proximity sensor, the operating distance changes and the operation becomes unstable. Secure a sufficient distance from the sensor as long as possible. ● The “D” dimension (mm) is the minimum distance from the proximity sensor’s detection plane to the metallic body. Secure a sufficient distance longer than the indicated dimension. 82 CS APS-CU APS-10 15 APS-F/U APS-S/M APS-CK APS-30/31 APS-GK APS-GM APS-GMD APS-GMC Rectangular type APS-10 to 15 Series Mutual Interference and Classification of Frequencies When using two or more proximity sensors in close contact with each Combinations of models classified by frequency other, secure an interval between the proximity sensors (center to (can be installed in close contact with each other) center) at least 10 times the operating distance. If the interval is inadequate, mutual interference may occur. L In applications where it is impossible to secure adequate intervals, use ( ) APS-12A-4T M LH (M) models classified by frequency. Normally, frequency classification is ( ) APS-12A-4N M LH H indicated by an alphabet immediately after the operating distance of the ( ) APS-13-4T M LH model number. * To install four or more sensors in close contact, preliminary study is ● Those models classified by frequency have either of the following required. markings on the cable so that they can easily be distinguished from other models. ( ) APS-13-4N M L For high frequencies (H) : yellow spiral mark M) L ( ) APS-13-7T M H For low frequencies (L) : red spiral mark H M) ( ) APS-14-15T M L Example: ( ) * To install three or more APS-14-15N M L sensors in close contact, ( ) APS-13 - 4T M Model with a standard frequency ( ) APS-15-15N M L preliminary study is ( ) -4N M (normally, "M" is omitted) required. APS-13 - 4TL Model with a lower frequency than the - 4NL standard frequency APS-13 - 4TH Model with a higher frequency than - 7TH the standard frequency Detection Area Diagrams (Representative Examples) APS-10-... APS-12A-... APS-13-4... APS-11-... APS-13-7... APS-14-... APS-15-... 83 CS APS-CU APS-10 15 APS-F/U APS-S/M APS-CK APS-30/31 APS-GK APS-GM APS-GMD APS-GMC Operating distance “X” (mm) Operating distance “X” (mm) Operating distance “X” (mm) Operating distance “X” (mm) Operating distance “X” (mm) Rectangular type APS-10 to 15 Series Shape Characteristics (Representative Examples) t=1mm t=1mm t=1mm APS-10-... APS-12A-... APS-13-4... a APS-11-... a a 6.00 6.00 6.00 x x x 5.00 5.00 5.00 Iron Iron Iron 4.00 4.00 4.00 3.00 3.00 3.00 SUS304 SUS304 2.00 SUS304 Aluminum 2.00 2.00 Copper 1.00 1.00 1.00 Aluminum Aluminum Copper Copper 0.00 0.00 0.00 10 20 30 10 20 30 10 20 30 Length of one side of target object “a” (mm) Length of one side of target object “a” (mm) Length of one side of target object “a” (mm) APS-13-7... APS-14-... t=1mm APS-15-... t=1mm a 9 16 Iron 8 a 14 x Aluminum 7 Iron 12 x 6 SUS304 10 5 8 4 Aluminum 6 3 Copper SUS304 2 4 Copper 1 2 0 10 20 30 40 50 60 0 20 40 60 80 Length of one side of target object “a” (mm) Length of one side of target object “a” (mm) 84 CS APS-CU APS-10 15 APS-F/U APS-S/M APS-CK APS-30/31 APS-GK APS-GM APS-GMD APS-GMC 21±0.2 Rectangular type APS-10 to 15 Series Installation APS-10-... SEMS screw M3-12 pan-head APS-11-... Mounting surface M3 tapped hole or 3.4 hole Plane washer 3-8-0.5 M3 hexagon nut 85 CS APS-CU APS-10 15 APS-F/U APS-S/M APS-CK APS-30/31 APS-GK APS-GM APS-GMD APS-GMC