Industrial Media Converter JetCon 2301 Fast Ethernet to Fiber Media Converter One 10/100 TX port to One 100FX port media converter Industrial Intelligent Supports Multi-Forwarding modes – Store and Forward, NMS (Switching Converter) Modify Cut-through, Pure Converter Rackmount and Converter with Auto Change modes PoE Plus Switch Supports Auto MDI/MDI-X, Auto Negotiation Industrial Supports Multi-mode 2KM, Single-mode 30KM PoE Plus -6 Extreme Low Data Forwarding Latency- 1.6 x 10 Sec Switch Auto Link Loss Forwarding (LLF) for fault detection Industrial 12-24V Fault Alert for port and power PoE Switch Redundant 10~60V DC Power inputs with DC polarity Industrial protection PoE Switch Supports AC 1.5KV Hi-Pot isolation protection Rackmount RoHS L3/L2 Switch EN 50121-3-2 Railway EMC compliance (applying) o o Gigabit Operating temperature -25~75 C (-40~75 C wide operating Managed Low Store & Modify Cut Pure LLF Forward Mode -through Mode Converter Mode temperature model available by request) Switch Latency Managed Converter w/ Dual EN 50121 o Auto-Change Ethernet -25~75 C 10~60VDC -3-2 Mode Switch Entry-level Switch Wireless Outdoor AP Embedded Overview PoE/Router Computer (LINUX) JetCon 2301 is a single port Fast Ethernet to Fiber providing easy maintenance and greatly saving time. Industrial media converter, compliant with EMC requirements of Users can easily activate forwarding mode and LLF Communication Computer EN 50121-3-2 Railway standard to provide excellent functions by adjusting the DIP switch and resetting (WIN/LINUX) performance under harsh environments featuring the converter to apply reconfigurations. Moreover, the Ethernet/PoE/ intensive vibration/shock and severe electromagnetic device provides alarm relay to trigger out a real alarm Serial Board interference. Users can benefit from the Single-mode signal for port or power events. Ethernet and Multi-mode fiber optic ports of the media converter JetCon 2301 provides power redundancy with wide I/O Server for providing extended distance transmission of up to range DC10V~60V inputs and built-in reverse polarity Media Converter 30KM. protection for ensuring the power continuity in the Serial Device The JetCon 2301 supports 4 types of forwarding system. Server modes - store and forward, modify cut-through, pure Combining 1.5KV Hi-Pot isolation protection and SFP Module o converter and converter modes with auto-change- -25~75 C wide operating temperature range, JetCon Din Rail forwarding modes for various applications, depending 2301 withstands vibration and shock in heavy machinery Power Supply on your transmission speed and size preferences. industry and interferes electromagnetic allying power To forward link status changes for alerting remote or substation environments while keeping your applications central management systems, JetCon 2301 features running non-stop. remote Link Loss Forwarding technology, as a result A Beijer Electronics Group Company www.korenix.com 484 Real-time & Enhanced Data Transmission via 4 Forwarding Modes JetCon 2301 outstands from other media converters by Modify Cut-through mode - to provide enhanced error supporting 4 forwarding switch modes, which makes it a checking and avoid possible collisions. perfect solution for various applications, depending on Pure Converter mode - to achieve extreme low data your transmission speed and size preferences. The 4 forwarding latency by simply converting signal between operation modes are: copper and fiber ports without packet check. Switching mode - to support up to 148810 packets Converter mode with Auto-Change-forward function - per second and maintain network efficiency by filtering to enhance transmission by changing packet forwarding abnormal packets. speeds. Auto Fault Detection through Link Loss Forwarding When using traditional fiber converters, users often amount of data loss. encounter the following problem: a fiber converter If a port loses the connection for any reason, it will acting like an ordinary unmanaged 2-port switch. activate Link Loss Forwarding to shut down the When one of the fiber converter's ports fails (e.g. the other port; hence, allowing the device on the other TX port), the other one (e.g. FX port) continues to end of the media to detect the disconnection. The receive data via the media (e.g. fiber), confusing the administrator over the network can be informed of the device on the other end of the media by indicating disconnection immediately, and react promptly to the that the connection is still intact. But, by the time situation, greatly reducing loss caused by any link failure. the disconnection is found, this error causes a great 485 www.korenix.com A Beijer Electronics Group Company Industrial Media Converter Dimensions (Unit = mm) Industrial Intelligent NMS Rackmount PoE Plus Switch Industrial PoE Plus Switch Industrial 12-24V PoE Switch Industrial PoE Switch Rackmount L3/L2 Switch Gigabit Managed Switch Managed Ethernet Switch Entry-level Switch Wireless Outdoor AP Embedded PoE/Router Specification Computer (LINUX) Technology Interface Industrial Standard: Ethernet copper port: 1 10/100TX ports with Auto MDI/ Communication IEEE 802.3 10Base-T MDI-X, Auto Negotiation Computer IEEE 802.3u 100Base-TX Fiber port: 1 100Mbps Fiber port, SC (WIN/LINUX) IEEE 802.3u 100Base-FX Cables: Ethernet/PoE/ IEEE 802.3x Flow Control and Back Pressure RJ-45 Connector: Serial Board Forwarding Technology: Supports 4 types of forwarding 10Base-T: 2-pairs UTP/STP Cat-3,4 TIA/EIA 568-B cable, Ethernet modes, store and forward, modify cut-through, pure 100 meters I/O Server converter and converter mode with auto negotiation. This 100Base-TX : 2/4 pairs UTP/STP Cat.5 TIA/EIA 568-B cable, Media feature is selected by DIP-switch. 100 meters Converter Link Lose Forward: Supports Bi-directional Link Loss Fast Ethernet Fiber Transceiver: Forwarding function. JetCon 2301-m: 2KM (Max.) Serial Device Server TX Auto Sensing/Forced: RJ-45 port supports auto- Wave-length: 1310nm negotiation and forced mode – 10Mbps/Half Duplex. Min TX Power:-19dBm SFP Module Packet Length: 64~1600Bytes @ Pure Converter mode. Max TX Power:-14dBm Din Rail Forwarding Latency: Min RX Sensitivity:-14dBm Power Supply Store and Forward: 250uS Max RX Sensitivity:-31dBm Modify Cut-Through: 17uS Link budget:12dBm Converter : 1.6uS JetCon 2301-s : 30KM (Max.) IEEE 802.3 flow control /back-pressure: Wave-length:1310nm Enabled by DIP Switch. Max TX Power:-8dBm Event Alarm: Supports port link down and power event Min TX Power:-15dBm alarm relay output, controlled by DIP switch. Max RX Sensitivity:-34dBm Digital Output: Dry Relay Output with 1A @24V DC ability Min RX Sensitivity:-8dBm Link budget: 19dBm A Beijer Electronics Group Company www.korenix.com 486 Diagnostic LEDs: Mechanical System Power (Green on) : Power 1 , 2 System Installation: DIN Rail installation Relay Alarm: Active (Red) Enclosure protection: Ingress Protection code - 30 Dimensions: 99 (D) x55(W)x 120(H) Link Loss Forwarding : Far end fault event occurred (Red Weight: 0.49Kg w/o packing on) Op. Mode: Convert (Green on) (Controlled by DIP Switch 4) Environmental Fiber Ethernet Port: Link/Activity (Green on/Blinking), Full Operating Temperature: Duplex/Collision (Yellow on/Yellow Blinking) -25~ 75°C (JetCon 2301-w -40~ 75°C) Ethernet Port: Link/Activity (Green on/Blinking), Full Duplex/ Operating Humidity: 5% ~ 95% (non-condensing) Collision ( Yellow On/ Yellow Blinking) Storage Temperature: -40 ~ 75°C DIP Switch: Storage Humidity: 0%~ 95% non-condensing DIP Switch 1: LLF Enable/Disable, default disable Hi-Pot: AC 1.5KV on port to port and port to power (DIP 1 off) EMC: Compliant with EN 50121-3-2 EMC DIP Switch 2: TX port Auto-Negotiation (OFF)/10H (ON), Regulatory Approvals EMI: CE/EN 55022 class A, FCC Class A default disable (DIP 2 off) DIP Switch 3 & 4: Forwarding Mode Selection, default store EN 61000-3-2:2006, EN 61000-3-3, EN 61000-6-4 & forward mode (DIP 3,4 off) EMS: CE/ EN 55024, EN 61000-6-2 DIP Switch 5: Power Alarm, default disable (DIP 5 off) IEC 61000-4-2,IEC61000-4-3, IEC61000-4-4, DIP Switch 6: Port Alarm, default disable (DIP 6 off) IEC61000-4-5, IEC61000-4-6, IEC61000-4-8 DIP Switch 7: Flow Control, default enable (DIP 7 off) Shock: IEC 60068-2-27 Power Connector: Removable Terminal Block Vibration: IEC 60068-2-6 Digital Output: Removable Terminal Block Free fall: IEC 60068-2-32 Power Requirements Power Supplly: DC 10~60V with polarity reverses correction. Supports Positive/Negative power system System power 5 Watts / DC 48 Ordering Information JetCon 2301-m Industrial Fast Ethernet to Fiber Media Converter, SC, Multi-mode / 2KM JetCon 2301-s Industrial Fast Ethernet to Fiber Media Converter, SC, Single-mode / 30KM Includes: JetCon 2301-m / 2301-s Quick Installation Guide 487 www.korenix.com A Beijer Electronics Group Company