Elite.Parts

Description

Kontron VX6060 CPU Board - VX6060 is the computing tool the MAG HPEC users were waiting for to walk away from 10 years of PowerPC Altivec dominance.

Part Number

VX6060

Price

Request Quote

Manufacturer

KONTRON

Lead Time

Request Quote

Category

PRODUCTS - V

Specifications

Airflow

SA - Standard Commercial (1" single height passive module heat sink, forced air) 3 m/s, RA - Rugged Air-Cooled (Optional) TBD, RC - Rugged Conduction-Cooled (Depending on processor frequency) NA

Altitude (Operating)

SA - Standard Commercial (1" single height passive module heat sink, forced air) -1,640 to 15,000 ft, RA - Rugged Air-Cooled (Optional) -1,000 to 33,000 ft, RC - Rugged Conduction-Cooled (Depending on processor frequency) -1,640 to 50,000 ft

Backplane 2 DisplayPort

Two embedded DisplayPort on VPX P2 (One for each node in the User Defined Region)

Backplane 2 PCI Express

Two x4 or eight x1 PCI Express interfaces on VPX P1 (x4 Pipes Region) (Optional common PCIe reference clock feature)

Backplane 4 Gigabit Ethernet

Four Gigabit Ethernet Links connected to the onboard 10 port switch. Three Serdes 1000BASE-BX and one 1000BASE-T

Backplane 4 Serial ATA

Four SATA ports (one from each node on P1, plus two from CPU A on P2) allowing Raid storage support

Backplane 4 Serial Ports

Four simplified serial lines or other build options (two Rx/Tx ports on each node is default)

Backplane Audio

Intel HD audio on VPX P2

BIOS

AMI uEFI BIOS

Conformal Coating

SA - Standard Commercial (1" single height passive module heat sink, forced air) Optional, RA - Rugged Air-Cooled (Optional) Standard, RC - Rugged Conduction-Cooled (Depending on processor frequency) Standard

Cooling Method

SA - Standard Commercial (1" single height passive module heat sink, forced air) Convection, RA - Rugged Air-Cooled (Optional) Convection, RC - Rugged Conduction-Cooled (Depending on processor frequency) Conduction

Debug Interface

XDP port for processor emulation probe connection

DMI interface (Per Node)

2.5 GT/s to Platform Controller Hub

EEPROM (Per Node)

1x serial 256 Kbit EEPROM dedicated to system data and 1x serial 256 Kbit EEPROM dedicated to application data

F-RAM (Per Node)

1x 512 KB of permanent F-RAM storage. Dedicated to Application.

Flash (BIOS) (Per Node)

Two sites up to 32 Mb SPI Flash

Form Factor

6U VPX forced-air or conduction-cooled

Front Panel 2 Gigabit Ethernet

Two 1000BASE-T on RJ-45 connector

Front Panel Graphics

One DisplayPort on standard 20-pin DisplayPort connector, one VGA

Front Panel Serial Port

EIA-232 UART interface for CPU A or CPU B on RJ11 connector

Front Panel USB

Two USB 2.0 port on 5-pin, type A USB connectors

LEDs

Six control and status bicolor (red/green) LEDs

Linux

Generic Linux 2.6.x BSP to be used with various Linux distributions., Verified for Fedora 12 and Wind River Linux (PNE 3.x)

Management

Redundant I2C operated remote status/control. Powerful feature compatible with any existing health management infrastructure. Compatible with Kontron Rack Controller (available separately)

NAND Flash (Per Node)

USB FLASH module socket (modules up to 8 GB currently)

Onboard Controllers (Per Node):3 Gigabit Ethernet

Two SERDES Links from i82580 (Barton Hills) Geth MAC/PHY., Connected to two lane PCIe of PCH., One front/rear 1000BASE-T from i82577 (Hanksville).

Onboard Interconnetion: Gigabit Ethernet

Marvell MVL88E6185 10 ports Gigabit Ethernet Serdes switch. Fully switched interconnection of CPU A and CPU B (3 Gethernet ports each) with 4 VPX Backplane ports (see below for details)

Onboard MMC

CPLD control unit with Node status/reset/start/stop features. Remote access from VPX SMB

Onboard PCIe

Dedicated 4x non transparent PCIe link with DMA between onboard CPUs for ultra high speed onboard data exchange

Onboard UART

2 simplified Serial Ports (Rx/Tx) on front and rear P2. EIA-232/EIA-422/EIA-485 mode available.

Onboard Watchdog

Software configurable dual-stage Watchdog timer with programmable timeout from 125 ms to 256s, generates IRQ or reset

Operating

SA - Standard Commercial (1" single height passive module heat sink, forced air) 0° to +55°C, RA - Rugged Air-Cooled (Optional) -40° to +75°C, RC - Rugged Conduction-Cooled (Depending on processor frequency) -40° to +85°C

PCIe (Per Node)

2.5 GT/s gen 1 PCIe. One 8x PCIe to the XMC slot, one 4x PCIe to the backplane x4 pipes through PEX8609 Non Transparent bridge.

Peripheral Extension

A Sata HDD carrier can be mounted instead of the PMC/XMC mezzanine

Platform Controller Hub (Per Node)

Intel Platform Controller Hub PCH QM57 (Ibex Peak-M), Two x4 PCI Express ports, six SATA ports, 14 USB 2.0 ports, several graphics interfaces, RTC, interrupt controller and timers

Power Supply

12V & 5V payload power, 3.3V auxiliary management power, 100W* with 4 GB of memory, no RTM & no XMC. Max of 145W * The power consumption varies depending on your product configuration (Clock settings, XMC, RTM & extra memory)

Processor

Intel Core i7
Intel Core i7 processor with integrated memory and graphics controller supporting ECC 32 KB L1, 256 KB L2 per core, 4 MB L3 shared between cores., LV 2.0 GHz (25W) 0.8" conduction-cooled board, 1" air-cooled board., SV 2.53 GHz (35W) forced air and conduction-cooled (characterization data provided for one slot operation)

Random

SA - Standard Commercial (1" single height passive module heat sink, forced air) VITA 47-Class V1, RA - Rugged Air-Cooled (Optional) VITA 47-Class V2, RC - Rugged Conduction-Cooled (Depending on processor frequency) VITA 47-Class V3

Relative Humidity

SA - Standard Commercial (1" single height passive module heat sink, forced air) 90% without condensation, RA - Rugged Air-Cooled (Optional) 95% without condensation, RC - Rugged Conduction-Cooled (Depending on processor frequency) 95% without condensation

RTOS

VxWorks 6

Shock (Operating)

SA - Standard Commercial (1" single height passive module heat sink, forced air) 20g/11 ms Half Sine, RA - Rugged Air-Cooled (Optional) 40g/20 ms Half Sine, RC - Rugged Conduction-Cooled (Depending on processor frequency) 40g/20 ms Half Sine

Storage

SA - Standard Commercial (1" single height passive module heat sink, forced air) -45° to +85°C, RA - Rugged Air-Cooled (Optional) -45° to +100°C, RC - Rugged Conduction-Cooled (Depending on processor frequency) -45° to +100°C

System Memory (Per Node)

Two DDR3 memory channels, 64-bit soldered ECC, running at 1067 MHz, Initially 2 GB on each channel (8 GB for the whole board)

Temperature

SA - Standard Commercial (1" single height passive module heat sink, forced air) VITA 47-Class AC1, RA - Rugged Air-Cooled (Optional) VITA 47-Class AC3, RC - Rugged Conduction-Cooled (Depending on processor frequency) VITA 47-Class CC4

Vibration Sine (Operating)

SA - Standard Commercial (1" single height passive module heat sink, forced air) 20-500 Hz - 2g, RA - Rugged Air-Cooled (Optional) 5-2,000 Hz - 3g, RC - Rugged Conduction-Cooled (Depending on processor frequency) 20-2,000 Hz - 5g

Windows

Windows XP, Windows7

Features

Four Cores with Hyperthreading (8 threads total) from 1.67 GHz to 2+ GHz
Modular USB FLASH 16 GB+ Mezzanine
New Microarchitecture - Octal Execution Thread VPX Blade
One XMC Site with x8 PCIe Interface
Rugged Conduction-Cooled Version under 100W Power
Six Gigabit Ethernet Links with onboard Switch
Support for up to 8 GB on 4 Channels, DDR3 1066 MHz, ECC registered SDRAM
Two Intel Core i7 with integrated DDR3 Memory Controller
VITA46 and OpenVPX 6U VPX Air-Cooled and Conduction-Cooled Versions
VPX Backplane and onboard x4 PCIe Interconnect

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products