KONTRON Viper830
Specifications
Altitude
4,572 m / 15,000 ft 15,240 m / 50,000 ft
BIOS
Award Elite BIOS in Boot Block Flash with recovery code; save CMOS in Flash option, and boot from LAN capability; Auto configuration, extended setup; CC00-E000 address blocking; PnP tables; Setup console redirection to serial port (VT100 mode) with CMOS setup access; Software enable/disable of onboard Ethernet; Diskless, keyboardless, and videoless operation extensions; System, video and LAN BIOS shadowing; Programmable bus and I/O speeds, and memory wait states; Advanced security feature for floppy and HDD; DMI and HDD S.M.A.R.T support; Advanced Configuration and Power Interface (ACPI 1.0), Advanced Power Management (APM 1.2), advanced thermal management (resume, overheat alarm and auto slow down), and Green support
Board size
Half Size
Bus Interface
Front Side Bus(66/100 MHz); AGP bus; PCI Bus(33 MHz); ISA Bus(8.33 MHz); PC/AT ISA bus or stand-alone operation; PC/104-Plus VIPci compatible
Cache
16/16KB Instruction / Data Level 1; 128/256KB Advanced Transfer Cache (on-die, full speed L2 cache with ECC)
Clock/Calendar
Real-time clock with 256 byte battery backup CMOS RAM
CompactFlash™ Module
Optional bootable CompactFlash™ module interfaces to secondary IDE channel, user upgradeable, master/slave
CPU
Intel Pentium III 600 MHz; Intel Pentium III - Low Power 500 MHz; Celeron processor 300, 566 MHz in PPGA370 Package; Celeron - Low Power 400 MHz
Data Path
64-bit CPU bus; 32-bit AGP bus; 32-bit on PCI bus (PC/104-Plus); 16-bit on ISA bus
Ethernet
One PCI 10Base-T/100Base-TX (Intel 82559)
Expansion Bus
PC/104+
Faceplate Connector
CRT (female DB-15 slim); Ethernet (RJ-45 with link/activity indicators);
FLAT PANEL SUPPORT
Supports monochrome & color Plasma, EL, DSTN, SSTN, TFT/CRT panels with resolution up to 800 x 600, 16.8M colors; 1024 x 768, 64K colors; or 1280 x 1024, 256 colors, non-interlaced; Compatible with CGA, EGA, Hercules, MDA, VGA, SVGA, XGA and SXGA
Floppy Disk
Support for two drives (360KB to 1.44MB)
Headers
USB (10-pin shrouded); serial ports (two 10-pin shrouded); parallel port (26-pin shrouded); floppy (34-pin shrouded); EIDE (one 40-pin shrouded); PS/2 mouse (4-pin locking); flat panel display (50-pin and 20-pin high density
I/O
SMC FDC37C672 Super I/O
Interrupts
11 edge sensitive and configurable; 4 PCI level sensitive, configurable to any interrupt vector for PnP compatibility; All ISA onboard interrupts are PnP compliant DMA Channels (ISA); Four 8-bit, three 16-bit; Supports scatter / gather, Fast Type-F DMA Flash Memory; 2Mb (256KB) Boot Block for BIOS field upgrade; 4KB Serial EEPROM for user configuration
LAN (Ethernet) Chipset
Intel GD82559
Mechanical
181 x 122 x 36mm at CPU / fan (7.125 x 4.80 x 1.40 in. at CPU / fan); Conforms to IEEE P996 PC/AT bus, PCI Rev. 2.1, & PC/104-Plus Rev. 1.0 specifications
Operating & Storage and Transit Temperature-Celeron / PIII
0° to 50°C/32° to 122°F -40° to +85°C/-40° to 185°F (w/airflow)
Operating & Storage and Transit Temperature-Celeron LP
0° to 60°C/32° to 140°F -40° to +85°C/-40° to 185°F (w/airflow)
Operating & Storage and Transit Temperature-PIII LP
0° to 60°C/32° to 140°F -40° to +85°C/-40° to 185°F (w/airflow)
Operating Humidity (RNC)
5% to 95% @ 40°C/104°F, non-condensing
OS Compatibility
PC and MS-DOS; Windows 3.X; Windows 95; Windows 98;Windows CE; Windows NT 4.0, Windows 2000; QNX; LINUX
Parallel Port
One bi-directional with all IEEE 1284 protocols supported and BIOS selectable IRQs and addressing
PCI EIDE
Two EIDE drives; PIO Mode 4, Bus Master IDE or Ultra DMA/33
Power Requirements
Supply Voltage Vcc - +5V -5%; CPU - 300 566 500 (PIII LP); ICC typ.* +5V 3.69A 3.10A 2.76A; ICC Susp.* +5V 1.64A 1.63A 1.44A
Processor
Intel Pentium III
Resolution
Supports CRT with resolution up to 800 x 600, 16.8 M colors; 1024 x 768, 64K colors; or 1280 x 1024, 256 colors, non-interlaced
Serial Ports
Two RS-232 (16C550) with 16 byte FIFO as COM1-4 with BIOS selectable IRQs and addressing, serial port 2 BIOS configurable RS-422/485
Shock
5 G, each axis
Storage and Transit Humidity
5% to 95% @ 40°/104°F, non-condensing
Supervisory
Two-stage software programmable watchdog timer drives NMI on 1ststage, system reset on 2nd stage; Time out from 16 msec to 4.25 min; CPU temperature monitor/alarm; power failure/low battery detector
System Chipset
Intel 440BX AGP set 66/100MHz system/memory bus
System Memory
One 168-pin latching DIMM socket, 64/72-bit; Up to 256 MB with 1, 2, 4, 8, 16 or 32M x 64/72, 66/100 MHz Synchronous; DRAM / Registered SDRAM non ECC / ECC mode (single bit error correction, double bit detection via Intel 440BX chip set); all 256 MB cacheable
USB Ports
Two
Vibration
1.5 G, each axis
Video
Integrated Frame Accelerated Graphics Port (AGP) 64-bit CRT/Flat Panel controller with 2 MB 83 MHz SDRAM memory (C&T 69000)
Video (Display) Chipset
C&T 69000
Features
- 10/100Base-TX Ethernet support
- 64-bit AGP CRT and Flat Panel Video with 2 MB SDRAM
- Celeron processor 300, 566 MHz in PPGA370 Package with 128 KB L2 Cache
- Intel 440BX AGPset with 66/100MHz FSB
- PC/104-Plus, ISA Passive Backplane or Stand-Alone Operation
- Pentium III 600 MHz
- Pentium III Low Power - 500 MHz
- Ultra DMA/33 IDE (Dual) & CompactFlash Disk Support
- Up to 256 MB SDRAM/RSDRAM
Datasheet
Extracted Text
The most powerful in the VIPer VIPer830 family, Kontron’s high performance VIPer830 SBC combines Intel Pentium III processor capabilities Maximum performance with full-featured functionality onto a half-size board format to Minimal size enable use of all slots on standard PICMG-compliant passive backplanes. Features include: Pentium III 600 MHz and Pentium III Low Power - 500 MHz High performance full-featured SBC Celeron™ processor 300, 566 MHz The VIPer830 half-size SBC features a Intel The VIPer830 also offers an optional in PPGA370 Package with 128 KB Pentium III processor with on-die 256 KB 10Base-T/100Base-TX Ethernet controller, L2 Cache L2 pipelined burst cache (full CPU core and its feature-set and target applications Intel 440BX AGPset with 66/100 speed, ECC capable). It supports up to can be extended by employing the use MHz FSB 256 MB memory, high performance PCI of Kontron’s T8501 PC/104+ mezzanine Up to 256 MB SDRAM/RSDRAM Ultra DMA/33 IDE and CompactFlash™. which adds Ultra-2 SCSI and a second Ethernet port. Ultra DMA/33 IDE (Dual) & CompactFlash™ Disk Support It also comes with a 64-bit AGP SVGA CRT and Flat Panel controller with 2 MB SDRAM. These new features enables the VIPer830 10/100Base-TX Ethernet support to become an ideal engine for a 64-bit AGP CRT and Flat Panel Video Onboard support for Universal Serial communications appliance. with 2 MB SDRAM Bus (USB) ports, serial/parallel ports, PC/104-Plus, ISA Passive Backplane and a floppy interface is standard. The or Stand-Alone Operation PC/104-Plus expansion header provides access to ISA and PCI bus PC/104 peripheral modules such as LAN and video controllers. VIPer830 - Technical Specifications CPU Headers: USB (10-pin shrouded); serial ports (two 10-pin shrouded); parallel ® • Intel Pentium III 600 MHz port (26-pin shrouded); floppy (34-pin shrouded); EIDE (one 40-pin shrouded); ® • Intel Pentium III - Low Power 500 MHz PS/2 mouse (4-pin locking); flat panel display (50-pin and 20-pin high density • Celeron™processor 300, 566 MHz in PPGA370 Package shrouded); CompactFlash™ Module header; CPU fan (2-pin locking); PC/104 • Celeron™ - Low Power 400 MHz header (104-pin); PC/104-Plus expansion header (120-pin); external power • Intel 440BX AGP set source (6-pin locking); power-down connector (2-pin locking); external battery • 66/100 MHz system/memory bus (3-pin locking); AT keyboard, speaker, and EIDE activity LED (16-pin shrouded) Bus Interface BIOS • Front Side Bus (66/100 MHz) • Award Elite BIOS in Boot Block Flash with recovery code; save CMOS in Flash • AGP bus option, and boot from LAN capability • PCI Bus (33 MHz) • Auto configuration, extended setup • ISA Bus (8.33 MHz) • CC00-E000 address blocking; PnP tables • PC/AT ISA bus or stand-alone operation • Setup console redirection to serial port (VT100 mode) with CMOS setup access • PC/104-Plus VIPci compatible • Software enable/disable of onboard Ethernet • Diskless, keyboardless, and videoless operation extensions Cache • System, video and LAN BIOS shadowing • 16/16 KB Instruction / Data Level 1 • Programmable bus and I/O speeds, and memory wait states • 128/256 KB Advanced Transfer Cache (on-die, full speed L2 cache with ECC) • Advanced security feature for floppy and HDD; DMI and HDD S.M.A.R.T support • Advanced Configuration and Power Interface (ACPI 1.0), Advanced Power Memory Management (APM 1.2), advanced thermal management (resume, overheat alarm • One 168-pin latching DIMM socket, 64/72-bit and auto slow down), and Green support • Up to 256 MB with 1, 2, 4, 8, 16 or 32M x 64/72, 66/100 MHz Synchronous • DRAM / Registered SDRAM non ECC / ECC mode (single bit error correction, Supervisory double bit detection via Intel 440BX chip set); all 256 MB cacheable • Two-stage software programmable watchdog timer drives NMI on 1ststage, system reset on 2nd stage Data Path • Time out from 16 msec to 4.25 min • 64-bit CPU bus; 32-bit AGP bus; 32-bit on PCI bus (PC/104-Plus); • CPU temperature monitor/alarm; power failure/low battery detector 16-bit on ISA bus OS Compatibility ® ® ® ® Interrupts • PC and MS-DOS™; Windows 3.X; Windows 95; Windows 98;Windows CE; ® ® • 11 edge sensitive and configurable Windows NT 4.0, Windows 2000; QNX™; LINUX • 4 PCI level sensitive, configurable to any interrupt vector for PnP compatibility • All ISA onboard interrupts are PnP compliant DMA Channels (ISA) Mechanical • Four 8-bit, three 16-bit • 181 x 122 x 36 mm at CPU / fan (7.125 x 4.80 x 1.40 in. at CPU / fan) • Supports scatter / gather, Fast Type-F DMA Flash Memory • Conforms to IEEE P996 PC/AT bus, PCI Rev. 2.1, & PC/104-Plus Rev. 1.0 • 2 Mb (256 KB) Boot Block for BIOS field upgrade specifications • 4 KB Serial EEPROM for user configuration Power Requirements I/O Supply Voltage Vcc = +5V -5% I/O: SMC FDC37C672 Super I/O CPU: 300 566 500 (PIII LP) USB Ports: Two ICC typ.* +5V 3.69A 3.10A 2.76A Serial Ports: Two RS-232 (16C550) with 16 byte FIFO as COM1-4 with BIOS ICC Susp.* +5V 1.64A 1.63A 1.44A selectable IRQs and addressing, serial port 2 BIOS configurable RS-422/485 * Measured with 32 MB SDRAM, PCI 10/100Base-TX Ethernet, keyboard, floppy and hard disk installed. Parallel Port: One bi-directional with all IEEE 1284 protocols supported and BIOS selectable IRQs and addressing Environmental Floppy Disk: Support for two drives (360 KB to 1.44 MB) Temperature: Operating Storage and Transit PCI EIDE: Two EIDE drives; PIO Mode 4, Bus Master IDE or Ultra DMA/33 Celeron / PIII 0° to 50°C/32° to 122°F -40° to +85°C/-40° to 185°F CompactFlash™ Module: Optional bootable CompactFlash™ module interfaces (w/airflow) to secondary IDE channel, user upgradeable, master/slave Celeron LP 0° to 60°C/32° to 140°F -40° to +85°C/-40° to 185°F Ethernet: One PCI 10Base-T/100Base-TX (Intel 82559) (w/airflow) PIII LP 0° to 60°C/32° to 140°F -40° to +85°C/-40° to 185°F Video (w/airflow) • Integrated Frame Accelerated Graphics Port (AGP) 64-bit CRT/Flat Panel Humidity (RNC): 5% to 95% @ 40°C/104°F 5% to 95% @ 40°/104°F controller with 2 MB 83 MHz SDRAM memory (C&T 69000) non-condensing non-condensing • Supports CRT with resolution up to 800 x 600, 16.8 M colors; Altitude: 4,572 m / 15,000 ft 15,240 m / 50,000 ft 1024 x 768, 64K colors; or 1280 x 1024, 256 colors, non-interlaced Shock: 5 G, each axis Vibration: 1.5 G, each axis Flat Panel Support • Supports monochrome & color Plasma, EL, DSTN, SSTN, TFT/CRT panels with Reliability resolution up to 800 x 600, 16.8M colors; 1024 x 768, 64K colors; or 1280 x • MTBF: >75,000 hours @ 20°C / 68°F (MIL-HDBK-217F) 1024, 256 colors, non-interlaced • USB and mouse / keyboard voltage protected by self-resetting fuses • Compatible with CGA, EGA, Hercules, MDA, VGA, SVGA, XGA and SXGA • Unique silicon serial number accessible via software • 2 year limited warranty Clock / Calendar • Real-time clock with 256 byte battery backup CMOS RAM Designed to meet or exceed: Safety: UL 1950; CSA C22.2 No 950; EN 60950; IEC950 Connectors EMI/EMC: FCC 47 CFR Part 15/CISPR22; CE Mark to EN55022/EN50082 Faceplate: CRT (female DB-15 slim); Ethernet (RJ-45 with link/activity indicators); PS/2 mouse and keyboard (two 6-pin mini-DIN) Corporate Offices US / Canada Europe, Middle East and Africa Asia Pacific 616 Curé-Boivin Oskar-von-Miller-Strafle 1 6F, No.9, Lane 235, Pao-Chiao Rd., Boisbriand (Québec) Canada J7G 2A7 85386 Eching/Munich Germany Hsin-Tien, Taipei Hsien, 231 Taiwan Tel. (450) 437-5682 Tel. +49 81-65 77 0 Tel. +886-2-2910 3532 Fax (450) 437-8053 Fax +49 81-65 77 219 Fax +886-2-2910 3482 sales@us.kontron.com sales@de.kontron.com sales@tw.kontron.com www.kontron.com The latest version of this document may be found on our web site. Specifications subject to change without notice. Some products may not be available in all regions. Kontron and the Kontron logo are registered trademarks of Kontron Embedded Computers. All other trademarks are the property of their respective owners. Copyright 2001 by Kontron Embedded Computers. All rights reserved. VIPer830.3_10/2001 Rep.0_10/2001
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the Viper830 have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods