KONTRON PowerEngineC7
Specifications
DIO
512 or 256 MB of DDR SDRAM with error correction (ECC) High-speed 200 MHz memory access Rugged design with soldered chips Supports code execution copied from Flash memory A predefined area of the memory is protected from the PCI and Ethernet accesses and allows the definition of a dedicated PPC communications area.
Environment
Temperature range VITA47-Class CC4 Operating: -40° to +85°C Storage: -45° to +100°C Conformal Coating: Standard Relative Humidity: 95% without condensing Altitude: -1,000 to 50,000 ft (-500 to 15,000m) Mechanical: Vibration Sine 22-2000 Hz - 5g Peak Random VITA47-Class V3 Shock 40g Peak 20 ms Half Sine Pulse 6 directions Voltage Requirement +3.3V +5% -2.5%: 2.6A typical
FSB
64 MB for System Flash; 128 MB for User Flash
Input
Dual Ethernet 10/100 port Asynchronous serial line, EIA-232 Simplified synchronous serial line, EIA-422/485 JTAG access on J1
Parallel
128 KB with RT clock. No Battery.
PCI
32-bit 33/66 MHz PCI bus interface 3.3V PCI signaling, 5V tolerant Supports CCPMC Draft Standard VITA 2.0 46 I/O pins are routed to the cPCI J2 connector cPCI PMC Carrier Board, to fit in adjacent PCIbus slot
Processor
PowerPC 750FX processor operating at 700 MHz Dual issue superscalar control processor L1 cache: 32 KB, 32-byte line, 8-way set associative instruction cache and, 32 KB, 32-byte line, 8-way set associative data cache Dual Integer Unit IEEE-754 Floating Point Unit, one madd/cycle Instruction and Data Memory Management Units (MMU) Internal 512 KB L2 cache with ECC operating at processor frequency Very low power implementation CPU cop port
Features
- 128 KB nvSRAM with RT clock
- 512 KB L2 Cache Clocked at Processor Frequency
- 64 MB System and 128 MB User Flash
- Dual Ethernet 10/100 Ports
- Low-power PowerPC 750FX at 700 MHz
- PCI Mezzanine Card (PMC) Slot
- Rugged Conduction-Cooled (-40°C to +85°C)
- Supports VxWorks 6.2 & 5.5.1
- Up to 512 MB DDR SDRAM
Datasheet
Extracted Text
PowerEngineC7 3U Single-Slot PowerPC 750FX CompactPCI Embedded Computer All-In-One 3U Rugged Conduction-Cooled CompactPCI Embedded Computer Low-power PowerPC 750FX at 700 MHz 512 KB L2 Cache Clocked at Processor Frequency Up to 512 MB DDR SDRAM 64 MB System and 128 MB User Flash 128 KB nvSRAM with RT clock Dual Ethernet 10/100 Ports PCI Mezzanine Card (PMC) Slot Rugged Conduction-Cooled (-40°C to +85°C) Supports VxWorks 6.2 & 5.5.1 If it‘s Embedded, it‘s Kontron. PowerEngineC7 Product Overview The PowerEngineC7 is a new member of the Kontron family of rugged 3U CompactPCI embedded computers. Designed to meet the requirements of compact, real-time systems for the most demand- ing defense, aerospace, industrial, transportation, and communica- tions applications, the PowerEngineC7 is a result of the combined expertise of Kontron, provider of high-performance, low-power SBCs such as the flagship 6U VME PowerEngine7, and of Thales Airborne Systems, provider of airborne mission computers. Technical Information PowerPC 750FX Processor PMC Expansion Slot – IEEE P1386/1386.1 PowerPC 750FX processor operating at 700 MHz 32-bit 33/66 MHz PCI bus interface Dual issue superscalar control processor 3.3V PCI signaling, 5V tolerant L1 cache: 32 KB, 32-byte line, 8-way set associative Supports CCPMC Draft Standard VITA 2.0 instruction cache and, 32 KB, 32-byte line, 8-way set 46 I/O pins are routed to the cPCI J2 connector associative data cache cPCI PMC Carrier Board, to fit in adjacent PCIbus slot Dual Integer Unit User I/O Available on cPCI J1 or J2 Connectors IEEE-754 Floating Point Unit, one madd/cycle Dual Ethernet 10/100 port Instruction and Data Memory Management Units (MMU) Asynchronous serial line, EIA-232 Internal 512 KB L2 cache with ECC operating at processor Simplified synchronous serial line, EIA-422/485 frequency JTAG access on J1 Very low power implementation Environmental Specifications CPU cop port Temperature range SDRAM Memory VITA47-Class CC4 512 or 256 MB of DDR SDRAM with error correction (ECC) Operating -40° to +85°C High-speed 200 MHz memory access Storage -45° to +100°C Rugged design with soldered chips Conformal Coating Supports code execution copied from Flash memory Standard A predefined area of the memory is protected from the PCI Relative Humidity and Ethernet accesses and allows the definition of a dedicated 95% without condensing Altitude PPC communications area. -1,000 to 50,000 ft (-500 to 15,000m) Flash 64 MB for System Flash; 128 MB for User Flash Mechanical Vibration Sine 22-2000 Hz - 5g Peak nvSRAM Random VITA47-Class V3 128 KB with RT clock. No Battery. Shock 40g Peak 20 ms Half Sine Pulse 6 directions Voltage Requirement +3.3V +5% -2.5%: 2.6A typical Ordering Information 7 4 000 CPC7- Environnement Class Conduction-Cooled RC Ambient Temperature DC PowerPC 750FX 700 Mhz 7 SDRAM 256 MB 3 512 MB 4 User Flash 128 MB 4 PMC Slot, Dual Ethernet 10/100, Dual Serial Lines 000 Options Order Code Description PB-CP7-000 I/O transition module for rear I/O routing COP-PN3-A Cop JTAG cable CPMC1-RC-000 cPCI Carrier Board Corporate Offices Europe, Middle East & Africa North America Asia Pacific Kontron Modular Computers S.A. Oskar-von-Miller-Str. 1 14118 Stowe Drive 4F, No. 415, Ti-Ding Blvd. 150, Rue Marcelin Berthelot 85386 Eching/Munich Poway, CA 92064-7147 Sec.2, NeiHu District ZI Toulon Est - BP 244 Germany USA Taipei Taiwan 114 83078 Toulon Cedex 9 - France Tel.: +49 (0)8165/ 77 777 Tel.: +1 888 294 4558 Tel.: +886-2-2799-2789 Tel: +33 (0) 4 98 16 34 00 Fax: +49 (0)8165/ 77 219 Fax: +1 858 677 0898 Fax: +886-2-2799-7399 Fax: +33 (0) 4 98 16 34 01 sales@kontron.com sales@us.kontron.com sales@kontron.com.tw sales@kontron.com www.kontron.com #PowerEngineC7#10042008PDL Copyright© 2008 Kontron AG. All rights reserved. All data is for information purposes only and not guaranteed for legal purposes. Information has been carefully checked and is believed to be accurate; however, no responsibility is assumed for accuracies. Kontron and the Kontron logo and all other trademarks or registered trademarks are the property of their respective owners and are recognized. Specifications are subject to change without notice.
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the PowerEngineC7 have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods