 PENTXM Low-Power Pentium® M VME Blade PC  1.6 or 1.8 GHz Pentium® M Processor  Low-Power Intel® 855GME Host Bridge  Two 64-bit/66 MHz PMC Slots  Direct Memory Access (DMA) Graphics Controller  Available in Four Ruggedization Levels If it‘s Embedded, it‘s Kontron.  Product Overview Both are low power dissipating processors, thus they The PENTXM is a PC-compatible high-performance, do not need a CPU fan. The Intel Pentium M processor high-functionality VMEbus processor board is upwardly code-compatible with the other members utilizing the 1.6 GHz or 1.8 GHz Intel Pentium of the x86 family of microprocessors. The processor has M. The single-slot board features 2 PMC sites, 1 a built-in floating point coprocessor for compatibility GB of soldered synchronous SDRAM and a variety with 486 and 386/387 designs. Utilizing the 64-bit Intel of interfaces including an option for an onboard 855GME host bridge, the Pentium M supports a 400 MHz hard disk drive, CompactFlash™ or IBM®/Hitachi bus frequency. MicroDrive™. A JTAG-compatible debug port on the Pentium M is The PENTXM is suitable for a range of demanding accessible via the optional In-Target Probe (ITP) 26- embedded applications within the industrial pin connector. The Intel Thermal Monitor allows system control, telecommunications, telemetry, scientific, designers to lower the cost of thermal solutions without and aerospace markets. Popular industry-standard compromising system integrity. By using a factory- tuned on-die temperature sensor and a fast-acting operating systems are supported to simplify thermal control circuit (TCC), the Pentium M processor, integration. without the aid of any additional software or hardware, can restrict its die temperature to remain within  1.8 GHz Pentium M processor 745 factory specifications under typical realworld operating - 64 KB L1 Cache conditions. - 2 MB L2 Cache - No CPU Fan Needed Processor Clock Frequency or Depending on the build option, the processor is  1.6 GHz Pentium M processor - 64 KB L1 Cache able to be clocked at up to 1.6 GHz or 1.8 GHz. The - 1 MB L2 Cache onboard BIOS allows the customer to either fix the - No CPU Fan Needed clock rate of the processor to a defined value or let  Low-Power Intel 855GME Host Bridge the processor determine its frequency according to the  1 GB 266 MHz DDR ECC SDRAM die temperature. By default on the commercial versions,  High-Performance EIDE Interfaces with Optional Onboard Disk Drive or Optional the CPU-controlled timing mode is set. In extended- CompactFlash or MicroDrive (In a Single Slot) temperature versions, WA or the rugged air-cooled and  Two 64-bit/66 MHz PMC Interfaces conduction-cooled versions, the core frequency is  PMC Expansion Board Available for Two or locked on a fixed value which allows the card to work More Additional PMC Sites without damage over the whole temperature range.  Intel 6300ESB I/O Controller Hub  Two 10/100/1000BASE-T Ethernet Interfaces Nevertheless, such a frequency mode can be changed by  VME64 Interface the user. The factory default clock frequency for rugged  Packet Switching Backplane (VITA 31.1) versions is 1.2 GHz.  64 MB Application Flash EPROM  512 KB BIOS Flash EPROM  High-Resolution Graphics Interface System Memory  Keyboard and Mouse Interface 1 GB of 266 MHz DDR ECC SDRAM is soldered on the  Up to 3 Serial Channel Interfaces  Up to 2 USB Interfaces board and is accessible from the processor on the  Watchdog Timer VMEbus. Double-bit error detection and single-bit error  Long Duration Timer correction are supported.  PMC I/O Carrier Boards Available The PENTXM has 64 MB application Flash EPROM and  OS Support of VxWorks, Linux, and Windows XP 512 KB BIOS Flash EPROM.  Available in Convection- and Conduction-Cooled Versions Pentium M Processor EIDE Hard Disk Interfaces The PENTXM uses the low-power first-generation 1.6 GHz Two EIDE hard disk interfaces support up to Ultra DMA Pentium M processor or the 1.8 GHz Pentium M processor 100 for highperformance drives. The primary channel, 745. Both feature 64 kB of primary on-die cache and a accessible via P2, connects to an optional hard/floppy/ 400 MHz Front Side Bus (FSB). The on-die secondary flash/CD-ROM drive board. The secondary channel can cache is 1 MB on the 1.6 GHz Pentium M processor be used for an onboard disk drive or dual CompactFlash and 2 MB on the 1.8 GHz Pentium M Processor 745. or a MicroDrive Type II drive carrier. PMC Interface The PCI bus is a 3.3V signalling only, 33/66 MHz, 32/64- bit bus that meets the requirements for PCI specification, revision 2.2. The PENTXM supports two PMC sites. Front panel I/O is available for both sites, via P2 for PMC #1 and optionally via P0 for PMC #2. Expansion to an optional dual PMC carrier board is available using a 32- bit 33 MHz expansion connector or one of the 64-bit 66 MHz PMC sites. VME Interface Implemented using the Tu n d r a® Un i v e r s e I I™ device, the VME interface provides fast hardware byte swapping as well as full interrupter/interrupt handler support. The interface automatically detects the system PENTXM Block Diagram and Front Panel controller and allows the PENTXM to function as a VME master or slave. PMC 2 PMC 1 ETH CONSOLE LK SPD HD PH R Ethernet Two 10/100/1000BASE-T Ethernet channels are imple- Phoenix BIOS mented by the Intel 82546GB LAN Controller via the 64- The Phoenix ServerBIOS™ 3 is provided with the PENTXM bit PCI bus. One Ethernet channel may be routed to the board. The BIOS contains a comprehensive Power-On front panel RJ-45. VITA 31.1 Gigabit Ethernet for VME Self-Test (POST), and LAN boot firmware is included. backplanes is supported. With the BIOS Setup Program you can modify BIOS settings and control the special features using options menus. Serial Interface The PENTXM has up to three 16550-compatible UART Board Support Packages serial channel interfaces. One EIA-232 serial port is BSPs are available for VxWorks, Linux, Windows XP and accessible on the front panel via a 26-pin high-density Windows 2000. connector. Two EIA-232/422/485 serial ports are accessible from the rear panel via P2. Built in Test Option I/O Controller Hub Kontron diagnostics tools for Pentium-based SBCs provide The Intel 6300ESB I/O Controller Hub features low a comprehensive set of Built-In Test (BIT) routines to power dissipation and provides port 60/64 emulation, a verify the integrity of the underlying hardware. Designed two-stage watchdog timer, GPIOs, as well as two of the for use with mission-critical software with hard real-time constraints, they simplify integration with applications PENTXM’s three UARTs. In addition, an LPC interface is provided for the Firmware Hub. running COTS software. Three test set definitions are available in Flash: cold start, warm start, and forced start. These definitions can Graphics Interface be tailored to achieve the appropriate test coverage/ The Intel 855GME host bridge provides resolutions up starting run time ratio. The Kontron Power-on BIT (PBIT) to 2048 x 1536 @ 75 Hz and up to 16M colors. The routines run automatically at power-on, and the test graphics interface is accessed via a 26-pin high-density results are stored in onboard Flash memory for later use front-panel connector. As an alternate, analog graphics by the operating system or application. are switchselectable to P0. Order Code : PBIT-PENTXM Additional Interfaces The PENTXM supports up to two USB 2.0 ports. A PC- compatible Real-Time Clock (RTC) is supported as well as a watchdog timer and a 32-bit Long Duration Timer with processor interrupt capability. Front-panel access to keyboard and mouse interfaces is supported with alternate access via P0. PENTXM PENTXM  Technical Information Rear Panel Connections P0 Build Options Product Warranty and Services Two P0 build options are available on the PENTXM.  All of Kontrons’ hardware products are covered by a two-year return-to- Build Option I/O routing on P0 & P2 type 1: factory warranty.  Ethernet channel 0  Several service programs are available, including update services, hotline access,  PMC site 2 I/O signals P24 1-64 product repair and exchange services, and online, remote, or on-site technical  Keyboard and mouse assistance.  Analog graphics Finally, in addition to its standard support services, Kontron offers customized con-  GPIO1 sultation to system integrators. Build Option I/O routing on P0 & P2 type 2: Miscellaneous  Ethernet channel 0  Board size: VME double Eurocard (6U: 233.3 mm x 160 mm)  Ethernet channel 1  Single VME slot  USB channel 2  All Kontron boards are EC-compliant.  PMC site 2 I/O signals P24 33-64  Conduction-cooled version of the PENTXM is IEEE 1101.2-1992-compliant.  Keyboard and mouse  Analog graphics  GPIO1  GPIO2 P2 I/O Connections The following I/O connections are routed to P2 on the PENTXM:  EIDE Bus  Two serial ports  PMC site 1 I/O signals P14 1-64  One USB 2.0 channel Add-Ons & Accessories Paddle Boards Other Add-Ons & Accessories A variety of paddle boards providing P2 and P0 backplane breakout are available for AD CR2/PMC 01 PMC Carrier for PENTXM with P0; Supports two single-width 32-bit PMCs; 5V and 3.3V the PENTXM. PCI signaling. VITA 36 Paddle Board, I/O routing on P0 & P2 type 1 (PBV36-P0-PXM00-01): AD CR2/PMC 10  40-pin IDC EIDE header PMC Carrier for PENTXM without P0; Supports two single-width 32-bit PMCs; 5V and  High-density 26-pin connector for keyboard, mouse, analog graphics, and 3.3V PCI signaling. one serial port CFD-1024-00  One USB 2.0 connector 1 GB CompactFlash Disk.  RJ-45 Ethernet connector AD 200/001-01 Dual  Two PIM locations CompactFlash carrier module for PENTXM; Provides two CompactFlash sites which also  One 10-pin IDC header for the second serial port (EIA-232/422/485) support the IBM/Hitachi MicroDrive hard disks; Uses one PMC slot; Kit includes cable  Header for a GPIO signal and applicable hardware.  VITA 36-compatible ICHD-PENTXM040 VITA 36 Paddle Board, I/O routing on P0 & P2 type 2 (PBV36-P0-PXM00-02): 40 GB, 2.5“ EIDE Disk Drive; Uses one PMC slot; Kit includes cable and applicable  40-pin IDC EIDE header hardware.  High-density 26-pin connector for keyboard, mouse, analog graphics, and CB 26D/124-00 one serial port Serial line, VGA, keyboard, mouse, breakout cable for PENTXM.  Two USB 2.0 connectors  Two RJ-45 Ethernet connectors  One PIM location  One 10-pin IDC header for the second serial port (EIA-232/422/485)  Header for two GPIO signals  VITA 36-compatible AD VP2/011-10, I/O routing on P0 & P2 type 1:  40-pin IDC EIDE header  PS/2 combined keyboard and mouse connector  One USB 2.0 connector  RJ-45 Ethernet connector  VGA connector  Two 68-pin sockets for PMC I/O  Two 10-pin IDC header for serial ports (EIA-232/422/485)  Headers for GPIO AD VP2/012-10, I/O routing on P0 & P2 type 2:  40-pin IDC EIDE header  PS/2 combined keyboard and mouse connector  One USB 2.0 connector PBV36-P0-PXM00-01  Two RJ-45 Ethernet connectors  VGA connector  One 68-pin socket for PMC I/O  34-pin IDC header for PMC2  Two 10-pin IDC header for serial ports (EIA-232/422/485)  Headers for GPIO www.kontron.com  Technical Information CPU VMEbus Interface A32/A24/A16 D08 (EO)/D16/D16BLT 1.6 GHz Pentium M Processor or 1.8 GHz Pentium M Processor 745 D32/D64/D32BLT/D64BLT (MBLT) Support Chip Sets Arbiter 4-level priority or round robin arbiter and Auto-SYSCON Graphics & Memory Requester Fair, ROR, or RWD Controller Intel 855GME I/O Hub Intel 6300ESB Miscellaneous PCI-VME Tundra Universe II PMC Interface 64-bit 66 MHz, 3.3V signaling only Memory Video Up to 16M colors, 2048 x 1536 @ 75 Hz SDRAM 1 GB Ethernet Two 10/100/1000BASE-T channels Cache 64 KB Primary, 1 MB Secondary USB One or two USB 2.0 interfaces Flash EPROM 512 KB of BIOS External IDE Primary & secondary IDE interfaces Application Flash 64 MB Serial Ports Three: one EIA-232 and two EIA-232/422/485 Standard Compliance Keyboard & Mouse PS/2 (with breakout cable)  PCI Specification, Rev 2.2 Real-time Clock DS1287-compatible/MC146818B  VITA 20-200x, CCPMC Draft Standard, Draft 1.15 Voltage +5V: 5A typical  VITA 36-199x, PMC I/O Module Draft Standard, Draft 0.1 Requirements +5V; +12V/-12V for PMC site only  IEEE P1386 Common Mezzanine Card Family: CMC Battery Backed Onboard battery and/or 5V standby  IEEE P1386.1 Physical/Environmental Layer for PMCs Options  IEEE 1101.2-1992 Mechanical Core Specifications for Conduction-Cooled Eurocards Environmental Specifications SA WA RA RC Standard Commercial Extended Temperature Rugged Air-Cooled Rugged Conduction-Cooled Conformal Coating Optional Standard Standard Standard Airflow 1.6 GHz 1.2 m/s - 3.1 m/s NA 1.8 GHz 1.2 m/s - - NA Temperature VITA 47-Class AC1 VITA 47-Class AC2 VITA 47-Class AC3 VITA 47-Class CC4 Cooling Method Convection Convection Convection Conduction Operating 0° to +55°C -20° to +65°C -40° to +75°C -40° to +85°C Storage -45° to +85°C -45° to +85°C -45° to +100°C -45° to +100°C Vibration Sine (Operating) 20/500 Hz: 2g 20/500 Hz: 2g 20/2,000 Hz: 3g 20/2,000 Hz: 5g Random VITA 47-Class V1 VITA 47-Class V1 VITA 47-Class V2 VITA 47-Class V3 Shock (Operating) 20g/11 ms Half Sine 20g/11 ms Half Sine 40g/20 ms Half Sine 40g/20 ms Half Sine Altitude (Operating) -1,640 to 15,000 ft -1,640 to 33,000 ft -1,640 to 33,000 ft -1,640 to 50,000 ft Relative Humidity 90% without condensation 95% without condensation 95% without condensation 95% without condensation PENTXM  Ordering Information PENTXM- 00 SA WA RA RC Environnement Class Standard (Air) X SA Extended Temperature (Air) X WA Rugged Convection-Cooled (Air) * RA Rugged Conduction-Cooled X RC Processor 1.6 GHz Pentium M X X X X 3 1.8 GHz Pentium M 745 X 4 SDRAM 1.0 GB X X X X 2 Flash 64MB X X X X 3 I/O Routing on PO & P2: Type 1 X X X X 10 on PO & P2: Type 2 X X X X 20 Reserved 00 PO Connector Yes X X X X 0 No X X X X N Coating Default X X X Option X V RoHS Default on SA X U * Contact Kontron With AFAQ ISO 9001 2000 Version Certification Kontron Modular Computers S.A. guarantees Total Customer Satisfaction  Corporate Offices Europe, Middle East & Africa North America Asia Pacific Kontron Modular Computers S.A. Oskar-von-Miller-Str. 1 14118 Stowe Drive 17 Building,Block #1,ABP. 150, Rue Marcelin Berthelot 85386 Eching/Munich Poway, CA 92064-7147 188 Southern West 4th Ring Road ZI Toulon Est - BP 244 Germany USA Beijing 100070,P.R.China 83078 Toulon Cedex 9 - France Tel.: +49 (0)8165/ 77 777 Tel.: +1 888 294 4558 Tel.: + 86 10 63751188 Tel: +33 (0) 4 98 16 34 00 Fax: +49 (0)8165/ 77 219 Fax: +1 858 677 0898 Fax: + 86 10 83682438 Fax: +33 (0) 4 98 16 34 01 sales@kontron.com sales@us.kontron.com kcn@kontron.cn sales@kontron.com www.kontron.com Add code V only when not default #PENTXM#17062008PDL Copyright© 2008 Kontron AG. All rights reserved. All data is for information purposes only and not guaranteed for legal purposes. Information has been carefully checked and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Kontron and the Kontron logo and all other trademarks or registered trademarks are the property of their respective owners and are recognized. Specifications are subject to change without notice.