Elite.Parts

Description

KONTRON PD2-AO-8/16 8-Channel PCI Card for Analog Output Data Acquisition

Part Number

PD2-AO-8/16

Price

Request Quote

Manufacturer

KONTRON

Lead Time

Request Quote

Category

INDUSTRIAL I/O (PCI/ISA) » ANALOG OUTPUT BOARDS (PCI/ISA)

Specifications

Accuracy

±3 LSB max

Calibrated gain error

3mV typ, 6mV max @ ±9.8V

Calibrated offset error

1mV typ, 2mV max @ 0.0V

Capacitive loads

180 pF min

Current drive

±20 mA min

Data transfer modes

DMA, interrupt, software

DNL

±3 LSB max

DSP buffer size

2k samples (2 buffers x 1k sample)

Gain bandwidth

1 MHz

Gain drift

25 ppm/°C

Monotonicity over temp.

15 bits, -40 to 85°C

Noise

less than 2 LSB RMS, 0-10000 Hz

Number of channels

Output coupling

Output impedance

0.15Omax

Output protection

short to ground, ±15V

Output range

±10V (custom ranges available)

Power-on state

0.0000V ±5mV (default),user programmable

Resolution

16 bits

Settling time

10µs to 0.003%

Slew rate

10V/µs

Type of D/A

double-buffered

Update rate

100 kS/s per channel;450 kS/s aggregate in non-DMA mode;up to 800 kS/s aggregate in DMA mode;

Datasheet

Kontron-PD2-AO-816-Datasheet1-1469055485.pdf

588 KiB

Download

Extracted Text

11/18/2009 15:00 PD2-AO-8/16 8-Channel PCI Card for Analog Output Data Acquisition ................................................................................................................................................................. • 8 Analog outputs (16-bit resolution) • 8 Digital inputs; 8 digital outputs • Three 24-bit counters/timers • Three clock/interrupt lines • Channel list (64 locations) • Independent waveform on each channel • Simultaneous channel update; update on external event • 2k samples onboard buffer size (upgradable to 64k samples) Supports UEIDaq Framework Data Acquisition Software Library for Windows. Linux and QNX drivers available. Visit our website for more details. General Description: Offering 8 analog outputs with 16-bit resolution, the PD2-AO-8/16 PCI-bus data acquisition board expands on the dual 12-bit calibration DAC-based output supplied on PD2-MF multifunction boards. Here you not only significantly increase the number of analog outputs, you also keep 16 digital I/O lines and three counter/timers. With these functions, the PD2-AO-8/16 is well suited to implement complex closed-loop systems as well as handle motor control and many other industrial-automation tasks. The card calibrates each analog output individually without using trimpots. Instead relies on a special D/A based scheme that stores calibration coefficients in EEPROM and loads them automatically upon power up. This method also keeps board outputs in a predefined user-programmable state upon system startup. Technical Specifications: Analog Outputs Digital I/O Number of channels 8 Number of channels 8 inputs, 8 outputs Resolution 16 bits Compatibility CMOS/TTL, 2kV ESD protected Update rate 100 kS/s per channel; Power-on state logic zero (default), 450 kS/s aggregate in non-DMA mode; user programmable up to 800 kS/s aggregate in DMA mode; Data transfer modes DMA, interrupt, software DSP buffer size 2k samples (2 buffers x 1k sample) Input termination 4.7kΩ pull-up to 5V Type of D/A double-buffered Output high level 3.0V typ @ -32mA, 3.4V typ @ -16mA, 4.2V Data transfer modes DMA, interrupt, software @ -2mA Accuracy ±3 LSB max Output low level 0.55V max @ 64mA DNL ±3 LSB max Input low voltage 0.0 - 0.8V Monotonicity over temp. 15 bits, -40 to 85°C Input high voltage 2.0 - 5.0V Calibrated gain error 3mV typ, 6mV max @ ±9.8V Counter/Timer Calibrated offset error 1mV typ, 2mV max @ 0.0V Number of channels 3 Output range ±10V (custom ranges available) Resolution 24 bits Output coupling DC Max frequency 16.5 MS/s for external clock, 33 MS/s for internal DSP clock Output impedance 0.15Ω max Min frequency 0.00002 Hz for internal clock, Current drive ±20 mA min no low limit for external clock Capacitive loads 180 pF min Min pulse width 20 ns Settling time 10µs to 0.003% Output high level 2.9V typ @ -4 mA Slew rate 10V/µs Output low level 0.5V min @ 4 mA Gain bandwidth 1 MHz Protection 7 kV ESD, ±30V over/undershoot Noise less than 2 LSB RMS, 0-10000 Hz Input low voltage 0.0 - 0.8V Output protection short to ground, ±15V Input high voltage 2.0 - 5.0V Power-on state 0.0000V ±5mV (default), user programmable Gain drift 25 ppm/°C Connection Schemes: Connector Cable Target Description On The Board Required Panel Carries analog output lines to 16-channel terminal panel J1 PD-CBL-96 PD2-AO-STP-16 J2 PD-CBL-37 PD2-AO-STP-16 Carries 8 digital input and 8 digital output lines to 16-channel terminal panel J1 PD-CBL-96 PD-BNC-16* Carries 8 analog output lines to 16-channel BNC terminal panel Carries 8 digital input and 8 digital output lines to BNC terminal panel J2 PD-CBL-37 PD-BNC-16 J2 PD-CBL-3650-8/8 PD2-DIO-BPLANE16 Carries digital lines to digital isolation panel for adding relays to the DIO lines J1 PD-CBL-96 PD-AO-AMP-100 Amplifies analog outputs to ±100V per channel Amplifies analog outputs to ±115V per channel J1 PD-CBL-96 PD-AO-AMP-115 * PD-BNC-16 was initially designed for analog input subsytem of UEI’s multifunction boards. Thus the analog output signals transfered via PD-CBL-96 will not match the signal designations on PD-BNC-16’s J1 connector. See PowerDAQ Analog Output Manual for more details and remapping diagram. United Electronic Industries, Inc. 1 http://www.ueidaq.com Tel: (508) 921-4600 Fax: (508) 668-2350 PD2-AO-8/16 - 8-Channel PCI Card for Analog Output Data Acquisition Block Diagram: AOUT7 SENSE DAC7 AOut Control AOUT7 Counter/ 3 Timers AOUT6 SENSE DAC6 DIn Control Control AOUT6 Digital & Timing Input DAC5 8 Logic Buffer Latch DAC4 Interrupt ... DAC3 DOut Control Digital Output 8 DAC2 Local Data Bus (Driver) AOUT1 SENSE AOUT1 IRQA DAC1 IRQB Motorola 66MHz AOUT0 SENSE IRQC DAC0 DSP 56301 AOUT0 Configuration & Calibration Analog Output Voltage EEPROM Calibration DACs Reference 32-bit PCI Bus Note: AOUTX on PD2-AO-8/16 board is internally connected to the corresponding AOUTX SENSE line. If you need remote sensing option, please use PD2-AO-32/16HC board. Pinout Diagrams: J1 — pinless SCSI (male) 96-pin connector: AGND 49 1 AGND NC 50 2 AGND J1 J2 AGND 51 3 AGND NC 52 4 AGND AGND 53 5 AGND AGND 54 6 AGND AGND 55 7 AGND AGND 56 8 AGND AGND 57 9 AGND AGND 58 10 AGND AGND 59 11 AGND AGND 60 12 AGND AGND 61 13 AGND AGND 62 14 AGND NC 63 15 AGND NC 64 16 NC NC 65 17 NC NC 66 18 AGND NC 67 19 NC AOUT7 68 20 NC AGND 69 21 AOUT6 AOUT4 70 22 AOUT5 AOUT2 71 23 AOUT3 AOUT0 72 24 AOUT1 AGND 73 25 AGND NC 74 26 AGND J2 — IDC-36 (male) AGND 75 27 NC AGND 76 28 NC 36-pin header: NC 77 29 AGND AGND 78 30 AGND DGND 1 2 DGND AGND 79 31 AGND TMR0 3 4 TMR2 AGND 80 32 AGND DGND 5 6 DGND AGND 81 33 AGND DGND 7 8 DGND AGND 82 34 AGND TMR1 9 10 +5V 200mA max AGND 83 35 AGND DIN0 11 12 DGND AGND 84 36 AGND DIN1 13 14 DOUT0 AGND 85 37 AGND DIN2 15 16 DOUT1 AGND 86 38 AGND DIN3 17 18 DOUT2 NC 87 39 AGND DIN4 19 20 DOUT3 NC 88 40 AGND DIN5 21 22 DOUT4 NC 89 41 NC DIN6 23 24 DOUT5 NC 90 42 NC DIN7 25 26 DOUT6 AGND 91 43 NC IRQA 27 28 DOUT7 AOUT7 SENSE 92 44 NC IRQB 29 30 DGND AOUT5 SENSE 93 45 AOUT6 SENSE IRQC 31 32 DGND AOUT3 SENSE 94 46 AOUT4 SENSE DGND 33 34 DGND AOUT2 SENSE 95 47 AGND DGND 35 36 DGND AOUT0 SENSE 96 48 AOUT1 SENSE Analog output signals Digital I/O signals United Electronic Industries, Inc. 2 http://www.ueidaq.com Tel: (508) 921-4600 Fax: (508) 668-2350 J1 Analog Output 96-pin Connector Analog Output Amplifiers Control Address Addr/Data J2 36-pin Digital I/O Connector

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products