KONTRON PCI-990
Specifications
BIOS
Phoenix BIOS
Board Type
Full Size
CPU
Dual Pentium III Processor 1.26GHz
Ethernet
Two PCI 10/100Base-TX (Intel 82559ER) or Two Gigabit Ethernet (two RJ-45 for copper; two MT-RJ SX duplex transceiver for fiber), available on mezzanine only
FDD
Support for two drives (360 KB to 1.44 MB)
IO Controller
SMSC LPC37B787 super I/O
Memory
Up to 4 GB of PC-133 RSDRAM
Parallel Ports
One bi-directional with all IEEE 1284 protocols supported with BIOS selectable IRQs and addressing
Processor
Intel Pentium III
SCSI
Dual Channel Ultra 160 SCSI-3 LVDS/SE based on LSI 53C1010
Serial Ports
Two (One RS-232 COM1, COM2 configurable as RS-232/RS-422/485)
USB Ports
Three (USB 1.1 compliant)
Video
PCI 32-bit video controller (C&T 69000) with 2 MB video memory
Features
- 256/512K of L2 Cache
- 64-bit PCI bus
- Board and CPU temperature monitoring
- Dual Intel Pentium III processors 1.26 GHz
- Dual-channel Ultra160 SCSI LVDS/SE (optional)
- Three USB ports
- Two EIDE hard disk interfaces
- Up to 133 MHz front-side bus
- Up to 4 GB of SDRAM
- Watchdog Timer
Datasheet
Extracted Text
The state-of-the-art dual CPU PCI/ISA Single Board Computer that packs new ® ® high power with two Intel Pentium III processors providing speed, performance, reliability and flexibility. The Kontron PCI-990 is designed to accommodate the endless demands for a high performance engine in platforms used in the embedded datacom/telecom market. An ideal SBC for high performance Internet security and data center solutions, as well as mission-critical CTI and demanding embedded computing applications. It is fully compatible with Kontron’s 1U, 2U, and 6U chassis such as the Kontron DreamSpeed and CoreVox families of platforms. Features: Dual Intel® Pentium® III processors 1.26 GHz Up to 133 MHz front-side bus 256/512K of L2 Cache Up to 4 GB of SDRAM 64-bit PCI bus Gigabit Ethernet Mezzanine Choice of Dual Ethernet ports: 10/100Base-TX or 1000Base (T or S/LX) based on Intel® 82544 Ethernet controller with copper- or optic-type interface available only with Kontron’s custom-built mezzanine Dual-channel Ultra160 SCSI LVDS/SE (optional) Two EIDE hard disk interfaces Three USB ports Watchdog Timer Board and CPU temperature monitoring CPU BIOS • Dual Pentium III Processor 1.26GHz • Phoenix BIOS in Boot Block Flash with recovery code; save CMOS in Flash option, • Serverworks ServerSet III LE chipset (CNB30LE north bridge & OSB4 south bridge) and boot from LAN capability Bus Interfaces • Auto configuration, extended setup • Front Side Bus at 133 MHz • CC000-E0000 address blocking; PnP tables • PCI Bus (33MHz - PCI bus and 66MHz - PCI bus Rev. 2.1 : Gigabit, SCSI, External backplane) • Setup console redirection to serial port (VT100 mode) with CMOS setup access • ISA Bus (8.33MHz) • All onboard peripherals can be enabled or disabled by software Cache • Diskless, keyboardless, and videoless operation extensions; • 16/16KB Instruction / Data Level 1 • System, video and LAN BIOS shadowing • 512KB Advanced Transfer Cache (on-die, full speed L2 cache with ECC) • Programmable memory wait states Memory • DMI & HDD S.M.A.R.T. support • Four 168-pin latching DIMM sockets, 64/72-bit • Advanced Configuration and Power Interface (ACPI 1.0), Intelligent System Monitoring (chassis • Up to 4 GB of PC-133 RSDRAM, 133 MHz Registered SDRAM non-ECC/ECC mode (single bit error intrusion and advanced thermal management such as resume, overheat alarm and auto slow down) correction, multiple bit detection via Serverworks ServerSet III LE); all 4 GB cacheable (per CPU) Supervisory Data Path • Dual-stage software programmable watchdog timer, time out from 16 msec to 4.5 min • 64-bit on CPU; 32-bit and 64-bit on PCI busses, 16-bit on ISA bus • Silicon Serial ID TAG for unique board identification accessible via software DMA Channels (ISA) • Hardware system monitor (voltages, temperature, fan speed), CPU temperature monitor / alarm; board • Four 8-bit, three 16-bit temperature sensor, power failure / low battery detector, and two end-user defined open-drain general • Supports scatter / gather, Fast Type-F DMA purpose inputs Interrupts OS Compatibility • 11 edge sensitive and configurable • Windows ® NT, Windows ® 2000, Linux, UNIX, and other OSs • 4 PCI level sensitive, configurable to any interrupt vector for PnP compatibility Mechanical • All ISA onboard interrupts are PnP compliant • 338 x 122 x 44 mm at CPU / fan (13.32 x 4.80 x 1.73 in. at CPU / fan) Flash Memory • Conforms to IEEE P996 PC/AT bus, PCI Rev. 2.1, and PICMG 1.0 Rev. 2.0 specifications Power Requirements • 512KB for BIOS field upgrade • Supply Voltage Vcc =+3.3V ±5%, +5V ±5%, +12V ±5% • 32Kb user serial EEPROM • ICC typ.* +5V: 7.4A I/O • ICC max.* +3.3V: 7.8A I/O controller SMSC LPC37B787 super I/O • ICC max* +5V: 10.9A USB Ports Three (USB 1.1 compliant) * Measured with dual CPU, video, 2 x Gigabit Ethernet, 512MB RSDRAM, keyboard and hard disk Serial Ports Two (One RS-232 COM1, COM2 configurable as RS-232/RS-422/485) Environmental Parallel Port One bi-directional with all IEEE 1284 protocols supported with BIOS Operating Storage and Transit selectable IRQs and addressing Temperature : 0-50°C / 32-122°F -40 to +70°C / -40 to 158°F Hard Disk PCI EIDE Ultra DMA/33, support for four IDE drives (in master/slave (w/100 LFM airflow) configuration); PIO Mode 4, Bus Master IDE or synchronous DMA mode Humidity: 5% to 95% @ 40°C/104°F 5% to 95% @ 40°C/104°F transfers up to 33 MB/s non-condensing non-condensing Floppy Disk Support for two drives (360 KB to 1.44 MB) Altitude: 4,000m / 13,123ft 15,000m / 49,212ft * Ethernet Two PCI 10/100Base-TX (Intel 82559ER) Shock: 15 G, 11ms half sine 30G, 11ms half sine or Two Gigabit Ethernet (two RJ-45 for copper; two MT-RJ SX duplex transceiver for Vibration: 1G,each axis,10Hz to 500Hz 2G, each axis, 10Hz to 500Hz fiber), available on mezzanine only Reliability CompactFlash Supports CompactFlash disk module (on secondary channel) • MTBF: >105,000hrs @ 30°C/86°F (Telcordia SR-332, Issue 1) SCSI Dual Channel Ultra 160 SCSI-3 LVDS/SE based on LSI 53C1010 • USB and mouse / keyboard voltage protected by self-resetting fuses • Unique silicon serial number accessible via software Video • 2-year limited warranty • PCI 32-bit video controller (C&T 69000) with 2 MB video memory • Supports CRT with resolution up to 1280 x 1024 Meets or exceeds: Clock / Calendar Safety : UL 1950; CSA C22.2 No 950; EN 60950; IEC950 • Real-time clock with 256 bytes battery backup CMOS RAM EMI/EMC: FCC 47 CFR Part 15/CISPR22, Class B; CE Mark to EN55022/EN50082 Connectors • Faceplate USB port (one 4-pin USB connector) * Note: Altitude (operating): May require additional cooling above 1800m/5905ft CRT (female DB-15) Fast Ethernet ( two RJ-45 with link/activity indicators) or Gigabit Ethernet (two RJ-45 for copper; two MT-RJ SX duplex transceiver for fiber) with link/activity indicators • Headers 10-pin shrouded : Serial ports (2) 10-pin : USB (1) 20-pin shrouded : System monitor (1) 20-pin : ATX power supply connector (1) 26-pin shrouded : Parallel port (1) 3-pin locking : CPU fans (2) 34-pin shrouded : Floppy (1) 40-pin module : CompactFlash module (1) 40-pin shrouded : EIDE (2) 68-pin High Density DB68: SCSI (2) 16-pin shrouded : AT keyboard, speaker, PS/2 mouse, reset, EIDE & SCSI activity LEDs US/Canada Europe, Middle East and Africa Asia Pacific Tel.: +49 81-65 77 0 Tel.: +886-2782-0201 Tel.: (450) 437-5682 Fax: +49 81-65 77 219 Fax: +886-2-2782-7486 1 800 387-4222 Fax: (450) 437-8053 www.kontron.com The latest version of this document may be found on our web site. Specifications subject to change without notice. Kontron Inc. is a wholly-owned operating company of Kontron. The Kontron logo is a regis- tered trademark of Kontron Inc. DreamSpeed is a trademark of Kontron Inc. All other trademarks are the property of their respective owners. Copyright 2002 by Kontron Inc. All rights reserved. Kontron PCI-990_05/2003_Ver 1.2 Printed in Canada
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the PCI-990 have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods