Kontron’s PCI-949 meets all PCI-949 bandwidth demands for mission- critical applications in the Internet infrastructure market, featuring Superior processing engine next-generation Pentium III processing, dual Ethernet, and an for Internet infrastructure option of up to 2 GB of memory. 1 GHz Pentium III processor and option for up to 2 GB of SDRAM Designed for high performance datacom / telecom PCI platforms Features include: Kontron’s PCI-949 PICMG-compliant single optional Intel 440GX AGPset to support Intel Pentium III processor at 700, board computer is an ideal processing up to 2 GB of memory. For applications 850 MHz, 1GHz and Celeron processor at engine for any number of communications that require a more cost-effective 566 and 733 MHz. gateway and Internet infrastructure processing solution, the PCI-949 is also Up to 1 GB of SDRAM on 4 DIMM applications. available with an Intel Celeron processor sockets (2 GB SDRAM with optional with clock speeds of up to 733 MHz. Intel 440GX AGPset) Designed with Intel Pentium III processing 2 x 10/100Base-TX Ethernet at 1 GHz and an option of up to 2 GB Additional features include Ultra-2 SCSI support of SDRAM, the PCI-949 is a superior choice LVD/SE, two serial ports (one configurable Ultra-2 SCSI LVD/SE (80 MB/s) for PCI platforms required to process data as RS232/422/485), floppy disk controller; traffic in any number of mission-critical real time clock with battery backup, two Option for AGP video with 2 MB applications deployed in Internet USB ports, and support for the following SDRAM 64-bit infrastructure networks. operating systems: Windows 98, Windows NT 4.0, Windows 2000, Linux, QNX, Featuring dual 10Base-T/100Base-Tx FreeBSD. Ethernet interfaces and an option for video support, the PCI-949 is available with the Intel 440BX AGPset which supports up to 1 GB of SDRAM, and is offered with an PCI-949 - Technical Specifications CPU Headers: Serial ports (two 10-pin shrouded); parallel port (26-pin shrouded); • Pentium III processor - 700, 850 MHz and 1GHz floppy (34-pin shrouded); EIDE (two 40-pin shrouded); PS/2 mouse (4-pin • Intel Celeron processor - 566, 733 MHz locking); CompactFlash™ Module header (40-pin); keyboard, speaker, and EIDE • Intel 440BX AGPset (440GX is optional) disk LED (16-pin shrouded); power-down connector (2-pin locking); SCSI: DSUB 68-PIN; Hardware monitor: 20-pin shrouded; CPU fan: two 3-pin locking; Battery: Bus Interface 4-pin non-locking; External battery: 2-pin locking; SCSI LED: 2-pin locking; • Front Side Bus (66/100 MHz) External power connector: 8-pin locking • AGP Bus 66 MHz • PCI Bus (33 MHz) BIOS • ISA Bus (8.33 MHz) • Award Elite BIOS in Boot Block Flash with recovery code; save CMOS in Flash option, and boot from LAN capability Cache • Auto configuration, extended setup • 16/16 KB Instruction / Data Level 1 • CC00-E000 address blocking; PnP tables • 256 KB Advanced Transfer Cache (on-die, full speed L2 cache with ECC) • Setup console redirection to serial port (VT100 mode) with CMOS setup access • Software enable/disable of onboard Ethernet; hardware enable/disable of Memory onboard video • Four 168-pin latching DIMM sockets, 64/72-bit • Diskless, keyboardless, and videoless operation extensions • Up to 1 GB of SDRAM (2 GB SDRAM optional with 440GX) with 2, 4, 8, 16 or • System, video, LAN, and SCSI BIOS shadowing 32 M x 64/72, 100 MHz Synchronous DRAM / Registered SDRAM non-ECC/ECC • Programmable memory wait states mode (single bit error correction, double bit detection via Intel 440BX AGPset); • Advanced security feature for floppy and HDD; DMI & HDD S.M.A.R.T. support 1 GB cacheable • Advanced Configuration and Power Interface (ACPI 1.0), Advanced Power Management (APM 1.2), advanced thermal management (resume, overheat alarm Data Path and auto slow down), and Green support • 64-bit CPU bus; 32-bit AGP bus; 32-bit on PCI bus; 16-bit on ISA bus Supervisory Interrupts • Two-stage software programmable watchdog timer drives NMI on 1st stage, • 11 edge sensitive and configurable system reset on 2nd stage • 4 PCI level sensitive, configurable to any interrupt vector for PnP compatibility • Time out from 16 msec to 4.25 min • All ISA onboard interrupts are PnP compliant • CPU temperature monitor/alarm; board temperature sensor; power failure/low battery detector, and two end-user defined open-drain general purpose I/Os; DMA Channels (ISA) SMBus, I2C Bus • Four 8-bit, three 16-bit • Supports scatter / gather, Fast Type-F DMA OS Compatibility ® ® ® ® • Windows 95; Windows 98; Windows NT 4.0; Windows 2000; QNX™, Flash Memory FreeBSD and Linux • 256 KB Boot Block for BIOS field upgrade • 4 KB Serial EEPROM for user configuration; silicon serial ID TAG for unique board Mechanical identification accessible via software • 338 x 122 x 36 mm (13.32 x 4.80 x 1.40 in.) at CPU fan • Conforms to IEEE P996 PC/AT bus, PCI Rev. 2.1, & PICMG Rev. 2.0 standards I/O I/O: SMC FDC37C672 Super I/O Power Requirements USB Ports: Two Supply Voltage Vcc : +5V ± 5% / +12V ± 5% Serial Ports: Two RS-232 (16C550) with 16 byte FIFO as COM1-2 with BIOS Pentium III: 700 850 1000 selectable IRQs and addressing, serial port 2 BIOS configurable RS-422/485 ICC typ. +5V 3.1 5.7A 6.6A Parallel Port: One bi-directional with all IEEE 1284 protocols supported and ICC max.* +5V 3.8 7.5A 9.1A BIOS selectable IRQs and addressing * Using KPower and a board with video, SCSI and 128MB SDRAM Floppy Disk: Support for two drives (360 KB to 1.44 MB) Environmental EIDE: Four EIDE drives; PIO Mode 4, Bus Master IDE or Ultra DMA/33 Operating Storage and Transit CompactFlash™ Module: Optional bootable CompactFlash™ module Temperature: 0° to 55°C/32° to 131°F -40° to +70°C/-40° to +158°F interfaces to secondary IDE channel, user upgradeable, master/slave (w/airflow) SCSI: Ultra-2 SCSI LVD/SE (80 MB/s) (optional) Humidity: 5% to 95% @ 40°C/104°F 0% to 95% @ +40°C/+104°F Ethernet: 2 x PCI 10Base-T/100Base-TX (Intel 82559ER) non-condensing non-condensing Altitude: 4,572 m / 15,000 ft 15,240 m / 50,000 ft Video (optional) Shock: 5 G, each axis • Integrated Frame Accelerated Graphics Port (AGP) 64-bit CRT controller with Vibration: 1.5 G, each axis 2 MB, 83 MHz SDRAM memory (C&T 69000) • Supports CRT with resolution up to 800 x 600, 16.8 M colors; Reliability 1024 x 768, 64K colors; or 1280 x 1024, 256 colors, non-interlaced • MTBF: TBD • SCSI termination, USB and mouse / keyboard voltage protected by Clock / Calendar self-resetting fuses • Real-time clock with 256 CMOS RAM and battery backup • Unique silicon serial number accessible via software • 2 year limited warranty Connectors Faceplate: CRT (female DB-15 slim); 2 Ethernet (RJ-45 with link/activity Designed to meet or exceed: indicators); 2 USB Safety: UL 1950; CSA C22.2 No 950; EN 60950; IEC950 EMI/EMC: FCC 47 CFR Part 15/CISPR22; CE Mark to EN55022/EN50082 Corporate Offices US / Canada Europe, Middle East and Africa Asia Pacific 6260 Sequence Drive Oskar-von-Miller-Strafle 1 6F, No.9, Lane 235, Pao-Chiao Rd., San Diego, CA 92121-4371 85386 Eching/Munich Germany Hsin-Tien, Taipei Hsien, 231 Taiwan Tel. 1(888)294-4558 Tel. +49 81-65 77 0 Tel. +886-2-2910 3532 Fax 1(888)667-0898 Fax +49 81-65 77 219 Fax +886-2-2910 3482 www.kontron.com sales@us.kontron.com sales@de.kontron.com sales@tw.kontron.com The latest version of this document may be found on our web site. Specifications subject to change without notice. Some products may not be available in all regions. Kontron and the Kontron logo are registered trademarks of Kontron Embedded Computers. All other trademarks are the property of their respective owners. Copyright 2001 by Kontron Embedded Computers. All rights reserved. PCI-949 Rev 1.1 September 2003