KONTRON PCI-755
Specifications
BIOS
Support for 4 Mb Firmware Hub; BIOS write protection provides anti-virus capability; DMI BIOS Support; Supports system soft power-off (via ATX power supply); Supports PXE Remote Boot; Supports boot from USB Devic
Bus on PICMG 1.0
ISA Interface, I/O & IRQ supported only (no DMA & bus master support); Supports one PCI bus (32-bit at 33MHz)
Chipsets
Intel 915GV Graphic Memory Controller Hub (GMCH); Intel®I/O Controller Hub 6 (ICH6)
Clock Generator
Integrated Circuit Systems ICS954101 (CK410)
Dimensions
338.6mm (L) x 122mm (W) (13.33”x4.8”)
Graphics
GMCH analog RGB output on the faceplate.; Resolution up to 2048 x 1536 at 75Hz
I/O Controller
LPC Super IO controller ITE IT8712F/HX
Miscellaneous
Voltage, fans and CPU/System temperature monitoring; Fan speed control and monitoring
On-board LAN
2x Marvell 88E8053 GbE - RJ45 on faceplate; Supports IEEE 802.3x compliant flow control; Supports IEEE 802.3ab Auto-Negotiation of speed, duplex and flow control
PCI Support
PCI Local Bus Specification, Rev 2.3 compliant; PCI Golden Fingers
Peripheral Support
1x IDE supports two devices; 4x SATA 1.5Gb/s devices; 5x USB Rev. 2.0 (4x internal, 1x external); 2x 16550 UART compatible serial ports with ESD protection; 1x parallel port with SPP/ECP/EPP mode; 1x floppy port; PS/2 Keyboard and Mouse port on bracket; CPU FAN connector for FAN speed control
Processors
Single Processor with Intel Land Grid Array 775 (LGA775) package; Intel Pentium 4 Processor or Celeron D with 1MB L2 cache; 533/800MHz Front Side Bus; Auto-selection of CPU frequency and core voltage; Intel Hyper-Threading Technology supported
System Memory
DDR2 400/533MHz up to 2 DIMMs Maximum 2GB System Memory
Watchdog Timer
Two-stage watchdog timer
Features
- 2 Gigabit Ethernet ports
- 4 Channels SATA 1.5Gb/s
- DDR2 and 400/533 up to a maximum of 2GB
- High-speed USB 2.0 ports
- Hyper-Threading Technology Support
- LGA775 socket support, 800/533 MHz System Bus
- Watchdog Timer
Datasheet
Extracted Text
PCI-755 ® ® ® Full-Size SBC featuring Intel Pentium 4 or Celeron D Processor with VGA, Dual Gigabit Ethernet, USB 2.0, SATA LGA775 socket support, 800/533 MHz System Bus Hyper-Threading Technology Support DDR2 and 400/533 up to a maximum of 2GB High-speed USB 2.0 ports 2 Gigabit Ethernet ports 4 Channels SATA 1.5Gb/s Watchdog Timer If it‘s Embedded, it‘s Kontron. D I M M D I M M PCI-755 Product Overview The PCI-755 is a full-size PICMG 1.0 form factor single-processor PCI-Express LAN, USB 2.0 and SATA round out the package for a ® system host board based on the Intel 915GV chipset with ICH6 I/O powerful rack-mount or wall-mount system. ® ® Controller Hub. It features the 90nm process Intel Pentium 4 Processor with LGA775 socket, 800MHz Front Side Bus, and 2MB L2 I/O features of the PCI-755 include a 32-bit/33MHz PCI Bus, cache and supports DDR2 DIMM 400/533MHz, up to 2 DIMMs and a onboard Gigabit Ethernet, LPC, EIDE Ultra ATA/100, 4 Channels ® maximum of 2GB. The Intel Graphic Media Accelerator 900 SATA 1.5Gb/s, UART compatible serial ports, parallel port, floppy technology with VGA up to 2048x1536x8bit at 75Hz resolution, drive port, PS/2 Keyboard and Mouse. Block Diagram CPU ® Pentium 4 ® Cele r on D LGA775 package 2MB L2 cache 53 3/ 800 MHz F S B Hy per- T h r e adi n g 5 33/80 0 MHz FSB Northbridge ® In te l 915GV GMCH CR T VGA DB - 1 5 D D R 2 40 0/533 DMI Interface 2 GB/ s Southbridge ® In tel IC H6 Marve ll GbE P C Ie x 1 EI D E 88E805 3 RJ - 4 5 IDE De vi ce s PCIe ATA C o nt ro ll er Marve ll GbE P C Ie x 1 88E805 3 RJ - 4 5 SATA ports x4 SAT A Golde n U S B 2. 0 PCI Bu s LPC USB 2.0 Fi ng ers ( I nte r nal x4, Ext e rn al x1 ) PCI Bus 3 2 -b it / 33MHz BIOS FWH Golde n IT8 888 Fi ng ers KB/Mouse ISA Bu s LPT 1 /F DD IT8712 F/IX LPC Super I/O COM1 COM2 www.kontron.com.tw All data is for information purposes only and not guaranteed for legal purposes. Subject to change without notice. Information in this datasheet has been carefully checked and is believed to be accurate; however, no responsibilty is assumed ® ® for inaccurancies. All brand or product names are trademarks or registered trademarks of their respective owners. DIMM-PC and JUMPtec are registered trademarks of Kontron Embedded Modules GmbH, Germany. PCI-755 Technical Information Specifications Bus on PICMG 1.0 Full-size PICMG 1.0 Single Board Computer ISA Interface, I/O & IRQ supported only (no DMA & bus master support) Dimensions: 338.6mm (L) x 122mm (W) (13.33”x4.8”) Supports one PCI bus (32-bit at 33MHz) Processors Clock Generator ® Single Processor with Intel Land Grid Array 775 (LGA775) package Integrated Circuit Systems ICS954101 (CK410) ® ® ® Intel Pentium 4 Processor or Celeron D with 1MB L2 cache I/O Controller 533/800MHz Front Side Bus LPC Super IO controller ITE IT8712F/HX Auto-selection of CPU frequency and core voltage On-board LAN Intel Hyper-Threading Technology supported 2x Marvell 88E8053 GbE - RJ45 on faceplate Chipsets Supports IEEE 802.3x compliant flow control ® Intel 915GV Graphic Memory Controller Hub (GMCH) Supports IEEE 802.3ab Auto-Negotiation of speed, duplex and flow control ® Intel I/O Controller Hub 6 (ICH6) Peripheral Support BIOS 1x IDE supports two devices Support for 4 Mb Firmware Hub 4x SATA 1.5Gb/s devices BIOS write protection provides anti-virus capability 5x USB Rev. 2.0 (4x internal, 1x external) DMI BIOS Support 2x 16550 UART compatible serial ports with ESD protection Supports system soft power-off (via ATX power supply) 1x parallel port with SPP/ECP/EPP mode Supports PXE Remote Boot 1x floppy port Supports boot from USB Device PS/2 Keyboard and Mouse port on bracket System Memory CPU FAN connector for FAN speed control DDR2 400/533MHz up to 2 DIMMs Maximum 2GB System Memory Watchdog Timer Graphics Two-stage watchdog timer GMCH analog RGB output on the faceplate. Miscellaneous Resolution up to 2048 x 1536 at 75Hz Voltage, fans and CPU/System temperature monitoring. PCI Support Fan speed control and monitoring PCI Local Bus Specification, Rev 2.3 compliant PCI Golden Fingers KB/ MS GbE VGA GbE USB Product Information Article Article Part No. Description ® ® ® PCI-755 PCI-755 BFIS915P-001000N Full-Size SBC supporting Intel Pentium 4 or Celeron D Processor with VGA, Dual Gigabit Ethernet, USB 2.0, SATA CPU Cooler 0H05CPU92926500L Standard CPU cooler for LGA775 socket (92x92x65.6mm) CPU Cooler (slim) 0ZCCOOLER000000L Slim CPU cooler for LGA775 socket - up to 3.4GHz (93x93x29.5mm) Standard CPU cooler Slim CPU cooler Corporate Office Europe, Africa & Mid East Kontron America Asia Pacific Oskar-von-Miller-Straße 1 14118 Stowe Dr 4F, No. 415, Ti-Ding Blvd. Sec. 2, 85386 Eching/München Poway, CA 92064-7147 NeiHu District, Taipei 114, Taiwan Tel: +49 81-65 77 0 Tel.: (888)-294-4558 Tel: +886-2-2799-2789 Fax +49 81-65 77 219 Fax: (858) 677-0898 Fax: +886-2-2799-7399 sales@kontron.com sales@us.kontron.com sales@kontron.com.tw www.kontron.com.tw All data is for information purposes only and not guaranteed for legal purposes. Subject to change without notice. Information in this datasheet has been carefully checked and is believed to be accurate; however, no responsibilty is assumed ® ® for inaccurancies. All brand or product names are trademarks or registered trademarks of their respective owners. DIMM-PC and JUMPtec are registered trademarks of Kontron Embedded Modules GmbH, Germany.
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the PCI-755 have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods