 ETX-e.lite original size  Embedded Technology eXtended  Extreme low power consumption  Best performed for headless application  Low-cost module  Memory on board (soldered) If it´s Embedded, it´s Kontron. ETX-e.lite  Product Overview The ETX-e.lite (Embedded Technology eXtended) is a ETX modules are like components, which plugs into an highly integrated PC module. The STPC ELITE 100 MHz application-specific baseboard. The ETX modules supply processor and the chipsets are optimized for ultra- the core CPU and memory subsystems together with low power with passive cooling solutions. Despite the Ethernet and standard PC I/O interfaces. They connect compact size, the ETX-e.lite offers all the standard PC to the rest of the embedded system through high- interfaces such as Ethernet and USB. The ETX-e.lite can density, low profile, surface-mount connectors, which replace a Microcontroller if networking without graphics carry both ISA and PCI bus signals as well as dedicated is required and a fanless alternative is desired. For I/O interfaces. The mechanics of the interconnection is networking purposes the ETX-e.lite comes with a such that an ETX/ baseboard combination is virtually the 10/100 Mbit Ethernet controller which allows an same in height as a one-board solution. ETX modules are easy Intranet/ Internet access. Total connectivity is scaleable and interchangeable, and they make possible the guaranteed by the huge amount of communication rapid development of semi-custom solutions for embedded interfaces like 2 serial TTL ports, an EPP/ ECP parallel applications. Despite the unbelievable variety of port, 2 USB ports and the 10/100 Mbit Ethernet. A functionality, the ETX-e.lite is a very inexpensive choice, CompactFlash socket is already mounted on the ETX-e.lite the cost effectiveness of this device is unbeatable. With and offers you a secure and EMI tolerant boot medium this low-cost module, you are with unlimited media capacity and DMA support. ....always a Jump ahead!  Technical Information Processor Parallel Port STPC ELITE 100MHz shared with Floppy SDRAM Floppy Interface 128 Mbyte on board (soldered) shared with LPT Bootable Flash Disk (on board) Other Features CompactFlash socket E²PROM BIOS Setup, LAN Boot, JRC support, I²C Bus (only ext. slaves), Keyboard- and Mouse Interface, Dark Boot, RTC, Watchdog, Harddisk JIDA Support, Floppy Interface shared on LPT, IrDA enhanced two enhanced IDE ports Low Power Consumption USB 4 Watt @ 5V 2x USB 1.1 Dimensions Ethernet 95 x 117mm 10/100 MBit Ethernet Temperature (*) Sound operation: 0° to 60°C, storage: -25° to 85°C C-MEDIA 8738 PCI-SX (optional) Humidity Serial Interfaces operation: 10% to 90%, storage: 5% to 95% (non condensing) 2x TTL (16550 compatible) (*) see manual for details  Ordering Information Article Part.-No. Description ETX-e.lite 18009-3200-10-0 ETX-e.lite with STPC 100 MHz and 32 MByte DRAM, CF socket ETX-e.lite 18009-2800-10-0 ETX-e.lite with 128 MByte DRAM (upon request only), CF socket ETXeval 18010-0000-00-0 ATX Baseboard for ETX modules  Corporate Offices US/ Canada Asia Pacific Europe, Middle East & Africa 6260 Sequence Drive 5F-1, 341, Sec 4, Chung Hsiao E. Brunnwiesenstr. 16 San Diego, CA 92121-4371 Rd, Taipei, Taiwan 94469 Deggendorf - Germany Tel.: (858) 677-0877 Tel: +886 2 2781 5791 Tel.: +49 (0)991/ 370 24-100 Fax: +49 (0)991/ 370 24-102 Fax: (858) 677-0898 Fax: +886 2 2741 7379 sales@us.kontron.com sales@kontron.com.tw sales-kem@kontron.com www.kontron.com #ETX-PM#040213ECh All data is for information purposes only and not guaranteed for legal purposes. Subject to change without notice. Information in this datasheet has been carefully checked and is believed to be accurate; however, no responsibilty is assumed ® ® for inaccurancies. All brand or product names are trademarks or registered trademarks of their respective owners. DIMM-PC and JUMPtec are registered trademarks of Kontron Embedded Modules GmbH, Germany. Rev #WEBtoNET-030301-e