KONTRON ETX-CN8
Specifications
Chipset
VIA CN896, VIA VT8237S
Chipset Integrated
PCI 2.2, 32 bit / 33 MHz PCI bus
Dimensions
95 x 114 mm
Dual Independent Display Support
System
Environment
Temperature: operation: 0° to 60°C, storage: -30° to 85°C
Expansion BUS
VIA VT6103L 10/100 MBit Base-T-PHY
FDD
Floppy Port
Humidity: operation: 10% to 90%, storage: 5% to 95% (non condensing)
System
IDE Interface
2x EIDE UDMA66
Max Data Transfer Rate
Up to 2 GB DDR2 ( 400/533/667) SODIMM memory
Operating Humidity
WinXP, WinXPc, Win CE, Linux, Windows VISTA
Other Features
JIDA Support, IrDA1.1 enhanced, WakeOnLAN, Watchdog, I²C Bus, RTC, E²PROM BIOS Setup, LAN Boot, JRC support, Suspend states (S0/S3/S4/S5)
Parallel
Shared with Floppy
Power Requirement
typical 9,3W @ 5V (VIA Eden processor 500 MHz)
Processor
VIA C7
VIA C7 processor and VIA Eden processor
SATA
2x Serial ATA 300 (ETX 3.0 compliant); supports RAID 0,1
Serial
2 serial Com ports
Storage Temperature
max. CRT WUXGA (1920x1440), max. LCD UXGA (1600x1200), (JILI3/EDID support )
USB
4x USB 2.0 (UHCI / EHCI)
VRAM
VIA CN896 integrated
Features
- 2x Serial ATA 300 for highspeed drivers
- ETX 3.0 - Long Term Support
- Up to 2 GB DDR2 SODIMM memory
- Windows Vista support
- With VIA C7 / Eden processor, VIA CN896 and VIA VT 8237S
Datasheet
Extracted Text
ETX®-CN8 With VIA C7®/Eden® processor, VIA CN896 and VIA VT8237S ETX 3.0 – Long Term Support 2x Serial ATA 300 for highspeed drives Up to 2 GB DDR2 SODIMM memory Windows Vista® support If it‘s Embedded, it‘s Kontron. ETX®-CN8 Product Overview ETX®-CN8 is the latest Computer On Module based on DMA capabilities are available. They do not provide the ETX® 3.0 standard. The new ETX®-CN8 module is based PCI bus only, the ISA bus signals are also available. A on the VIA C7® processor and VIA Eden® processor as lot of existing ISA boards can still be used via an ISA well as the VIA CN896 and VIA VT 8237S chipset. slot on a baseboard. This avoids expensive redesigns and ETX®-CN8 modules also will provide the following in- well proven ISA cards to PCI versions for standard PC terfaces that are always located in the same physical motherboards. position on each board, thus guaranteering scalabili- PCI32, USB 2.0, Serial ATA 300, Parallel ATA, LVDS Multi- ty between modules. Media ports as well as an ACPI (Advanced Configuration It also takes advantage of the new ETX® 3.0 specifi- and Power Interface) for optimized power management. cation that allow for 2 Serial ATA 300 ports without The JILI display interface technology ensures automa- vio-lating the existing ETX® 2.8 pin usage. tic setting of the video controller parameters for the For further expansions two IDE ports with Ultra66 attached LCD panel. Five mounting holes on the board provide secure mounting to allow the module increased shock and vibration resistance. Technical Information Processor Serial Ports VIA C7® processor and VIA Eden® processor 2 serial Com ports Chipset CRT / LVDS Resolution VIA CN896, VIA VT8237S max. CRT WUXGA (1920x1440), max. LCD UXGA (1600x1200), SATA (JILI3/EDID support ) 2x Serial ATA 300 (ETX 3.0 compliant); supports RAID 0,1 Enhanced Parallel Port IDE Shared with Floppy 2x EIDE UDMA66 Floppy Port USB Floppy Port 4x USB 2.0 (UHCI / EHCI) Other Features Memory JIDA Support, IrDA1.1 enhanced, WakeOnLAN, Watchdog, I²C Bus, RTC, E²PROM BIOS Setup, LAN Boot, JRC support, Suspend states (S0/S3/S4/S5) Up to 2 GB DDR2 ( 400/533/667) SODIMM memory Operating Systems PCI WinXP, WinXPc, Win CE, Linux, Windows VISTA® PCI 2.2, 32 bit / 33 MHz PCI bus Dimensions Ethernet 95 x 114 mm VIA VT6103L 10/100 MBit Base-T-PHY Power Consumption Sound typical 9,3W @ 5V (VIA Eden® processor 500 MHz) VIA VT1618 AC 97 controller, Line In, Line Out, Mic in Temperature (*) Video Controller operation: 0° to 60°C, storage: -30° to 85°C VIA CN896 integrated Humidity Internal UMA video, up to 64 MByte (opt. 128 MByte) operation: 10% to 90%, storage: 5% to 95% (non condensing) VIA Uni (Chrome Pro™ HCDX9 IGP) Dual Independent Display Support (*) Ask about wider temperature ranges Ordering Information Article Part.-No. Description ETX®-CN8 18031-0000-05-2 with VIA Eden® processor 500MHz with CN896 ETX®-CN8 18031-0000-15-0 with VIA C7® processor 1.5GHz with CN896 ETX®-CN8-HSP 18031-0000-99-0 HSP-ETX®-CD threaded stand off ETX®-CN8-HSP 18031-0000-99-1 HSP-ETX®-CD through hole stand off Corporate Offices Europe, Middle East & Africa North America Asia Pacific Kontron Embedded Modules Oskar-von-Miller-Str. 1 14118 Stowe Drive 17 Building,Block #1,ABP. Brunnwiesenstr. 16 85386 Eching/Munich Poway, CA 92064-7147 188 Southern West 4th Ring Road 94469 Deggendorf Germany USA Beijing 100070,P.R.China Germany Tel.: +49 (0)8165/ 77 777 Tel.: +1 888 294 4558 Tel.: + 86 10 63751188 Tel.: +49 (0)991/ 370 24-100 Fax: +49 (0)8165/ 77 219 Fax: +1 858 677 0898 Fax: + 86 10 83682438 Fax: +49 (0)991/ 370 24-333 sales@kontron.com sales@us.kontron.com kcn@kontron.cn sales@kontron.com www.kontron.com/ETX Rev#ETX-CN8# 130620008PDL Copyright© 2008 Kontron Embedded Modules GmbH All data is for information purposes only and not guaranteed for legal purposes. Subject to change without notice. Information in this datasheet has been carefully checked and is believed to be accurate; however, no responsibility is assumed for inaccurancies. All rights reserved. DIMM-PC®, PISA®, ETX®, ETXexpress® and X-board® are trademarks or registered trademarks of Kontron Embedded Modules GmbH. Kontron is trademark or registered trademark of Kontron AG. All other brand or product names are trademarks or registered trademarks or copyrights by their respective owners and are recognized.
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the ETX-CN8 have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods