Elite.Parts chervon right Manufacturers chervon right K chervon right KONTRON chervon right ePCI-200
About product Specifications Features Datasheet FAQ

KONTRON ePCI-200

Image of KONTRON ePCI-200

Description

Kontron ePCI-200 Industrial Computer CPU Board | Intel Pentium 4 Processor | ServerWorks GC-SL Chipset | Dual LAN | VGA

Part Number

ePCI-200

Price

Request Quote

Manufacturer

KONTRON

Lead Time

Request Quote

Category

SLOT CPU/PICMG BOARDS »  PICMG 1.2 SBC (PCI ONLY)

Specifications

ATA/IDE

Ultra DMA/100, support for four IDE drives (in master/slave configuration); PIO Mode 4, Bus Master IDE or synchronous DMA mode transfer up to 100 MB/s

BIOS

Phoenix BIOS in Boot Black Flash with recovery code; save CMOS in Flash option, and boot from LAN capability. Setup console redirection to serial port (VT100 mode) with CMOS setup access. All onboard peripherals (except VGA en/dis by jumper) can be enabled or disabled by software. Diskless, keyboardless, and videoless operation extensions. Keyboardless and videoless operation need console redirection. System, video and LAN BIOS shadowing. DMI & HDD S.M.A.R.T. support. Advanced Configuration and Power Interface (ACPI 1.0). Intelligent System Monitoring (chassis intrusion and advanced thermal management such as resume, overheat alarm and auto slow down). ATX support with SOFTOFF software enable/disable

Bus Interfaces

CPU Front Side Bus at 400/ 533MHz. Bus A: 32-bit PCI at 33 MHz, universal keying. Bus B: 64-Bit PCI-X up to 133MHz, 3.3V-only

Compact Flash

Supports compact flash disk module (on secondary channel)

CPU

Supports mPGA478 socket Intel Pentium 4 processor up to 3GHz. 512KB Advanced Transfer Cache (on-die, full speed L2 cache with ECC)

Data Path

64-bit on CPU; 32-bit and 64-bit on PCI busses

Ethernet

Two PCI 10/100Base-TX (Intel 82551ER) with automatic crossover

Faceplate

CRT (female DB-15). Ethernet (two RJ-45 with link/activity indicators). Keyboard/ Mouse (6-pin female minidin)

Flash Memory

512KB for BIOS field upgrade

Floppy Disk

Support for two drives (360 KB to 1.44 MB)

Headers

3-pin locking: CPU fans (1). 4-pin ATX type:CPU power. 10-pin shrouded: Serial ports (2). 10-pin: Dual USB (1) 14-pin shrouded: TV-Out second VGA. 16-pin shrouded: Multifunction. 20-pin shrouded: System monitor (1). 20-pin: ATX power supply (1). 26-pin shrouded: Parallel port (1). 34-pin: shrouded: Floppy (1). 40-pin T069: CFlash module (1). 40-pin shrouded: ATA/IDE (2). 16-pin shrouded: AT keyboard, speaker, PS/2 mouse activity LED.

I/O controller

National PC87417 super I/O

Mechanical

338x130x40 mm at CPU/ fan (13.33x4.80x1.6in. at CPU/ fan). Conforms to PICMG 1.2(ePCI-X)

Memory

Three 184-pin DIMM sockets. Up to 4GB of registered PCI2100/ 266 DDR SDRAM (ECC, 2.5V support). ECC support

OS Compatibility

Windows xp, Windows 2000, Windows 2000 server, Linux, FreeBSD

Parallel Port

One bi-directional with all IEEE 1284 protocols supported with BIOS selectable IRQs and addressing

Processor

Intel Pentium 4

Serial Ports

Two(One RS-232, second configurable as RS-232/RS-422/485)

Supervisory

Two-stage software programmable watchdog timer, time out from 16 msec to 4.5min. Silicon Serial ID TAG for unique board identification accessible via software. Hardware system monitor (voltages, temperature, monitoring of 6 external fans), CPU temperature monitor/ alarm; board temperature sensor, power failure/ low battery detector, and two end-user defined open-drain general purpose I/Os; SMBus

USB Ports

Two(USB 1.1 compliant)

Video

ATI Mobility Radeon M6-C16H. 2D/3D graphics up to 1600x1200 x 32-bit/ Dual-Head monitor support. Motion video acceleration

Features

Datasheet

pdf file

KONTRON-ePCI-200-datasheet.pdf

179 KiB

Extracted Text

Next generation Pentium 4 ePCI-200 processing, the natural evolu- ® ® tion from the popular PICMG Intel Pentium 4 1.0 PCI-ISA specification Dual Bus PICMG 1.2 (ePCI-X) SHB Bringing PCI-X technology to embedded applications TM Intel® Pentium 4® Desktop up to 3GHz Intel® Pentium 4® Mobile up to 2.2GHz The ePCI-200 will reach new levels of performance in PICMG CPU boards. 400/533MHz Front Side Bus speed It comes standard with a rich set of features including the latest generation 478-pin processor technology, PCI-X support up to 133MHz, up to 4Gig of Two independent PCI busses DDR SDRAM, an onboard ATI Mobility™ Radeon™ with integrated 16MB of DDR BUS A: PCI 32-bit 33MHz SDRAM and a dual Fast Ethernet controller. Additional features include two BUS B: PCI 64-bit 33MHz up to PCI-X 133MHz USB ports, a flopp y controller, two ser ial ports, a parallel port, PS/2 keyboard Up to 4 GB of PC2100 (266) DDR SDRAM on 3 and mouse ports, a hardware monitor and a dual stage watchdog timer. DIMM memory modules This gener ic single board computer is t argeted at a broad range of applications Dual 10/100BaseT-TX Ethernet with automatic requiring a high performance processing with a good graphic solution in a crossover PICMG environment (where ISA bus support is not necessary). Those ATI® Mobility™ Radeon™ 3D dual-screen video requirements can be found for applications in most of the markets: controller (16MB DDR SDRAM) automation, communications, medical and military. • Standard VGA output on bracket • TV-Out or second VGA on 14-pin header ePCI-200 Technical Specifications CPU BIOS • Supports mPGA478 socket Intel® Pentium® 4 processor up t o 3GHz • 512KB A dvanced Transf er Cache (on-die,full speed L2 cache with ECC) • Phoenix BIOS in Boot Block Flash with recovery code; save CMOS in Flash op tion, and boot from LAN capability BUS INTERFACES • Setup console redirection to ser ial port (VT100 mode) with CMOS setup access • All onboard per ipherals (except VG A en/dis by jumper) can be enabled or disabled by • CPU Front Side Bus at 400/533MHz software • Bus A: 32-bit PCI at 33MHz, universal keying • Diskless, keyboardless, and videoless oper ation e xtensions. K eyboardless and videoless • Bus B: 64-bit PCI-X up to 133MHz, 3.3V-only operation need console r edirection • Sy stem, video and L AN BIOS shadowing MEMORY • DMI & HDD S.M.A.R.T. suppor t • Advanced Conf iguration and Power Inter face (ACPI 1.0) • Three 184-pin DIMM sockets • Intelligent System Monit oring (chassis intr usion and advanced thermal management such • Up to 4GB of regis tered PC2100/266 DDR SDRAM (ECC, 2.5V support) as resume, o verheat alarm and auto slow down) • ECC support • ATX support wit h SOFTOFF software enable/disable DATA PATH Supervisor y • 64-bit on CPU; 32-bit and 6 4-bit on PCI busses • Two-stage sof tware programmable watchdog timer, time out from 16 msec to 4.5 min • Silicon Serial ID TAG for unique board identification accessible via sof tware FL ASH MEMORY • Hardw are system monitor (voltages, temperature, monitor ing of 6 external f ans), CPU temperature monit or / alarm; board temperature sensor, power failure / low batt ery • 512KB for BIOS field upgrade detector, and two end-user def ined open-drain general purpose I/Os; SMBus I/O OS Compatibility I/O controller National PC87417 super I/O • Windows® XP, Windows ® 2000, Windows 2000 server, Linux, FreeBSD USB Ports Two (USB 1.1 compliant) Serial Por ts Two (One RS-232, second conf igurable as RS-232/RS-422/485) Mechanical Parallel Port One bi-directional wit h all IEEE 1284 pr otocols suppor ted with • 338 x 130 x 40 mm at CPU / fan (13.33 x 4.80 x 1.6 in. at CPU / fan) BIOS selectable IRQs and addr essing • Conforms t o PICMG 1.2 (ePCI-X) r1.0 ATA/IDE Ultra DMA/100, support f or four IDE drives (in master/slave configuration); PIO Mode 4, Bus Mas ter IDE or synchr onous DMA Power Requirements mode transfer up to 100MB/s Floppy Disk Support f or two drives (360 KB t o 1.4 4 MB) • Supply Volt age Vcc =+3.3V ±5%, +5V ±5%, +12V ±5% Ether net Two PCI 10/100Base-TX (Intel 82551ER) wit h automatic crossover • ICC typ.* +5V: TBD • ICC typ.* +3.3V: TBD CompactFlash Supports Com pactFlash disk module (on secondary channel) • ICC max* +5V: TBD * Measured with 2.8GHz CPU and 2GB of 266MHz DDR SDRAM VIDEO Environmental ATI Mobility Radeon M6-C16H Operating Storage and Transit •2D/3D graphics up to 1600 x 1200 x 32-bit • Dual-Head monitor support Temperature : TBD -40 to +70°C / -40 to 158°F • Motion video acceleration Humidity: 5% to 90% @ 40°C/104°F 5% to 90% @ 40°C/104°F CONNECTORS non-condensing non-condensing Altitude: 4,572 m / 15,000 ft 15,240 m / 50,000 ft • Faceplate CRT (female DB-15) Etherne t ( two RJ-45 with link/activity indicators) Shock: 5G each axis Bellcore GR-63-CORE Section 4.3 Keyboard / Mouse (6-pin female minidin) Vibration: 1.0G, 5-500Hz eac h axis 2.0G, 5-50Hz; 3.0G, • Headers 3-pin loc king: CPU fans (1) 4-pin ATX type : CPU power 50-500Hz each axis 10-pin shrouded : Serial ports (2) 10-pin : Dual USB (1) 14-pin shrouded: TV-Out second VGA 16-pin shrouded : Multifunction Reliability 20-pin shr ouded : System monitor (1) 20-pin : ATX power suppl y (1) 26-pin shr ouded : Parallel por t (1) 34-pin shrouded : Floppy (1) • MTBF: TBD 40-pin T069 :CFlash module (1) 40-pin shrouded : ATA/IDE (2) • USB and mouse / keyboard v oltage prot ected by self-r esetting fuses 16-pin shrouded : AT keyboard, speaker, PS/2 mouse, reset, hard disk and • Unique silicon serial number accessible via sof tware activity LED • 2-year limited w arranty Designed to meet or e xceed: Safety : UL 60950; CSA C22.2 No 60950-00; EN 60950; IEC 60950 EMI/EMC: FCC 47 CFR Part 15/CISPR22, Class B; CE Mark to EN55022/EN55024 Cor porate Of fices Europe, Middle East and Africa Asia Pacific US / Canada 6260 Sequence Drive Oskar-von-Miller-Straße 1 6F No 9, Lane 235, Pao Chiao Road Hsin D-85386 Ec hing/Münich Germany Tien 231, Taipei, Taiwan San Diego, C A 92121-4371 Tel. (858) 677-0877 Tel. +49 8 1-65 77 0 Tel. +886 2 2910 3532 Fax (858) 677-0898 Fax +49 8 1-65 77 219 Fax +886 2 2910 3482 www.kontron.com sales@us.kontron.com sales@de.kontr on.com sales@tw.kontr on.com The latest version of t his document may be found on our web site. Specif ications subject to change without notice. Some products may not be available in all regions. Kontron and the Kontron logo are Registered rademark s of Kontron Embedded Computers. All other tr ademark s are the property of their respective owners. Copyright 2002 b y Kontron Embedded Computers. All rights reserved. SBC-845D-VEA .1_11/2002

Frequently asked questions

What makes Elite.Parts unique?

chervon down
At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

What kind of warranty will the ePCI-200 have?

chervon down
Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Which carriers does Elite.Parts work with?

chervon down
Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Will Elite.Parts sell to me even though I live outside the USA?

chervon down
Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

I have a preferred payment method. Will Elite.Parts accept it?

chervon down
All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

Why buy from GID?

quality

Quality

We are industry veterans who take pride in our work

protection

Protection

Avoid the dangers of risky trading in the gray market

access

Access

Our network of suppliers is ready and at your disposal

savings

Savings

Maintain legacy systems to prevent costly downtime

speed

Speed

Time is of the essence, and we are respectful of yours

What they say about us

FANTASTIC RESOURCE

star star star star star

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

star star star star star

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

star star star star star

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

star star star star star

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

star star star star star

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

star star star star star

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Related Products

product

Kontron EPCI-100 CPU Board - Half Size ePCI-X Pentium III 1GHz

product

Kontron ePCI-101 CPU Board - ePCI half-size SBC with Pentium M Power

product

Kontron ePCI-201 CPU Board - PICMG 1.2 Single Board Computer, Intel Pentium 4 w/875 chipset.