Elite.Parts

Description

AMCC PowerPC 405EP based Computer-On-Module. Feature optimized for cost sensitive applications.
E2Brain PowerPC module with AMCC 405EP @ 266MHz, 16MB SDRAM, 4MB Flash, 2 serial ports, ext. temperature range

Part Number

EB405-E2

Price

Request Quote

Manufacturer

KONTRON

Lead Time

Request Quote

Category

COMPUTER-ON-MODULES » E2BRAIN

Specifications

Additional onboard devices

Real time clock with backup by auxiliary power supply, watchdog

Compliance

Mechanical Conformance: EBrain Module Specification Rev. 0.2 Dimension: 115 mm x 75 mm (EBrain card size) Temperature Ranges: 0 C to + 70 C (standard) 40 C to +85 C (extended) Operation Humidity Range: 93 RH at 40 C, non-condensing (acc. to IEC 60068-2-78) Weight: 47 g MTBF: 337,975h (acc. MIL-HDBK-217F)

I/O

Dual Fast Ethernet Interface 10/100Base-Tx with autosensing and onboard PHY 2/4 high-speed serial ports (16550 compatible) 15 general purpose I/O (GPIO) pins

Max Data Transfer Rate

16/64 MB SDRAM (133MHz); (up to 256 MB SDRAM possible) 4/8 MB soldered Flash; (up to 32 MB possible) 64 kBit EEPROM for user settings

Max. Speed

Operating system independent boot loader with network support VxWorks board support package Linux board support packages

Power consumption

typ. 4W at 3,3V (266 MHz, 4 MB Flash, 16 MB DDR-SDRAM)

Processor

Integrated PowerPC microprocessor AMCC 405EP @ 266 MHz 404 Dhrystone (2.1) MIPS at 266 MHz

System interface

PCI Master/Agent interface, 32 Bit address/data, 33/66 MHz, LPC (Low Pin Count) interface (no DMA) for I/O extensions, IC, JTAG/BDM interface, 2 Terminal ports (Rx/Tx only), Utility port (LEDs, Reset, Abort), CompactFlash (IDE) interface

Features

15 general purpose I/O (GPIO) pins
2 serial interfaces
2 Terminal ports (Rx/Tx)
2x Fast Ethernet
Additional Features: CompactFlash, RTC, watchdog
Extended temperature range -40 to +85°C (optional)
IBM/AMCC PowerPC 405EP @ 266MHz
PCI 32bit, 33/66MHz
Up to 256MB SDRAM, 32MB Flash
VxWorks and Linux support

Datasheet

eb40-11098501955.pdf

107 KiB

Download

Extracted Text

�� Optimized Balance The EB405, built around the AMCC 405EP delivers an optimized balance of performance, low power and features. Rich Mix Of Features Cost optimized to the max, but still a complete E�Brain Computer-On-Module, the EB405 provides a comprehensive set of features including Dual Fast Ethernet. Open Standard Take advantage of the open E�Brain standard assuring compatibility, upgradability and easy deployment. If it’s Embedded, it’s Kontron. �� Product Overview The EB405 is designed to provide a flexible, fast Processor Integrated PowerPC microprocessor AMCC 405EP @ 266 MHz time-to-market solution to satisfy the demands of 404 Dhrystone (2.1) MIPS at 266 MHz cost sensitive embedded applications. Memory 16/64 MB SDRAM (133MHz); (up to 256 MB SDRAM possible) Optimized Balance 4/8 MB soldered Flash; (up to 32 MB possible) 64 kBit EEPROM for user settings Built around the AMCC 405EP PowerPC, the EB405 is a perfect solution for embedded computing appliances with Additional onboard devices constraints on power consumption and cooling, but still Real time clock with backup by auxiliary power supply, watchdog requiring an optimized balance of performance and features. System interface PCI Master/Agent interface, 32 Bit address/data, 33/66 MHz, LPC (Low Pin Count) interface (no DMA) for I/O extensions, I�C, JTAG/BDM interface, 2 Terminal ports Rich Mix Of Features (Rx/Tx only), Utility port (LEDs, Reset, Abort), CompactFlash (IDE) interface As a complete E�Brain Computer-On-Module, the EB405 I/O interface provides a comprehensive set of features including PCI, Dual Fast Ethernet Interface 10/100Base-Tx with autosensing and onboard PHY LPC, I�C, Dual Fast Ethernet, serial interfaces, RTC, 2/4 high-speed serial ports (16550 compatible) 15 general purpose I/O (GPIO) pins watchdog and GPIO pins, fulfilling the needs of all kinds of embedded computing devices. Software support Operating system independent boot loader with network support VxWorks board support package Open Standard Linux board support packages The E�Brain Computer-On-Module family based on an Power consumption open standard offers a bunch of advantages like scalability typ. 4W at 3,3V (266 MHz, 4 MB Flash, 16 MB DDR-SDRAM) and upgradability, paving the way for shorter time-to- market for all kind of embedded computing appliances. Common Mechanical Conformance: E�Brain Module Specification Rev. 0.2 Dimension: 115 mm x 75 mm (E�Brain card size) Temperature Ranges: 0 �C to + 70 �C (standard) �40 �C to +85 �C (extended) Operation Humidity Range: 93� RH at 40 �C, non-condensing (acc. to IEC 60068-2-78) Weight: 47 g MTBF: 337,975h (acc. MIL-HDBK-217F) Ordering Information Product Description Order No. EB405 E�Brain PowerPC module with AMCC 405EP @ 266MHz, 16MB SDRAM, 4MB Flash, Dual Ethernet, 2 serial ports 28163 EB405 E�Brain PowerPC module with AMCC 405EP @ 266MHz, 64MB SDRAM, 8MB Flash, Dual Ethernet, 4 serial ports 28164 EB405-E2 E�Brain PowerPC module with AMCC 405EP @ 266MHz, 16MB SDRAM, 4MB Flash, 2 serial ports, ext. temperature range 28391 KIT-EB405 EB405 documentation on CD-R � 28392 VXW-BSP-EB405 VxWorks Board Support Package for WindRiver Workbench 28393 LIN-BSP-EB405 Linux Board Support Package, distribution independent package with cross toolchain and root file system 29394 EB405-EVALKIT Evaluation kit for EB405, contains EB405 (64MB SDRAM, 8MB Flash), evaluation carrier board, power supply, cabling, 28395 pre-installed Linux BSP, CD-ROM with documentation and Linux software 1) KIT-EB405 downloadable from the Internet free of charge Corporate Offices US/ Canada Europe, Middle East and Africa Asia Pacific Kontron Modular Computers GmbH 14118 Stowe Drive Oskar-von-Miller-Stra�e 1 2F. No.2, Lane 50, Nankang Road, Sudetenstr. 7 Poway, CA 92064-7147 85386 Eching/Munich Germany Sec. 3, Nankang District D-87600 Kaufbeuren Tel.: +1 (0)888-294-4558 Tel.: +49 (0)8165-770 Taipei, Taiwan Tel.: +49 (0) 8341 803 0 Fax: +1 (0)858-677-0898 Fax: +49 (0)8165-77219 Tel.: +886-2-2782 0201 Fax: +49 (0) 8341 803 499 Fax: +886-2-2782 7486 sales@us.kontron.com sales@kontron.com sales@kontron.com.tw sales@kontron.com Our worldwide sales representatives and partners can be found on our websites: http://www.kontron.com, http://www.kontron-emea.com www.kontron.com/e2brain Publication Version 11/2005 Copyright � 2003 Kontron AG. All rights reserved. Printed in Germany. All data is for information purposes only and not guaranteed for legal purposes. Information has been carefully checked and is believed to be accurate; however, no responsibility is assumed for inaccurancies. Kontron and the Kontron logo are registered trademarks of Kontron AG. All other brand or product names are trademarks or registered trademarks or copyrights by their respective owners and are recognized. Specifications are subject to change without notice.

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products