�������� � � ����� �������� ������������������������� ���������� Minimum power consumption Ultra low voltage processor with max. 7W Industry tailored Compact all-in-one Industrial PC Optimized cost-value ratio Designed for price sensitive applications If it’s Embedded, it’s Kontron. Great Performance. Exceptional Value Just pay for what you need ... All-in-one industrial PC boards via CompactPCI or Ethernet over Kontron Modular Computers The 4HP single slot, space saving board backplane in accordance with PICMG 2.16; GmbH introduces the CP6500- comes with all necessary industry-required in the latter, the communication channel V, a new Value Line CompactPCI interfaces, like two serial ports, plus the is Ethernet over backplane. board in 6U height. It comes usual keyboard, floppy drive and graphics with a ULV 400 MHz or LV connections (VGA CRT with a resolution of Optimized cost-value ratio 1600 x 1200 pixels), including four USB The CP6500-V is tailored for cost-sensitive 1 GHz Intel� Celeron� 2.0 ports. Two Fast Ethernet interfaces, applications without compromising on the processor and is designed for which are either accessible via the front processor performance. The optimized cost- price-sensitive applications. panel or, alternatively, realized through the value ratio is achieved by graphic support backplane in accordance with PICMG 2.16, coming along with the chipset, memory as The CP6500-V CompactPCI system controller enables wireless switched fabrics. a pure inexpensive 144-pin SODIMM SDRAM board combines the capabilities of an all- Two EIDE ports facilitate the connection socket (scalable at three levels, with 128 in-one industrial PC with the advantages of mass-storage devices; one of these MB, 256 MB, or 512 MB) and taking of a robust and low powered 6U CompactPCI interfaces is designed for an on-board HDD. advantage of selecting value oriented design. In addition, the CPU board includes a components. CompactFlash socket. Minimum power consumption Via a 32 bit/33 MHz PMC slot with rear I/O Software support is available for Windows The CP6500-V incorporates either the ULV support, the CP6500-V can be further XP, XP Embedded and 2000, as well as Linux (ultra low voltage) 400 MHz Celeron or the expanded through mezzanine cards as and VxWorks. more performance oriented LV (low voltage) required. Additional I/O can be connected Celeron 1 GHz, both providing excellent through an LPC interface, or via rear I/O power dissipation figures. or CompactPCI extension components. The 400MHz version even allows operation The CP6500-V works in the system slot as without any additional cooling provision well as in the peripheral slot. In the former, in the system. it will communicate with all peripheral ��� ���������������������� �������������� ������������������ ���������� ���������� ������� � ������� �� ��� �� � � � � � � �� � �� � ���� ����� ��� ����� ��� �������� �������� Specification Exceptional Cost-Value Ratio CompactPCI Bus Interface System Processor � PICMG 2.0 Rev. 3.0 compatible, 32 bit/33 MHz. Low voltage Celeron , Micro-FCBGA 478, 256KByte L2 on-die cache: 5V default signaling (3.3V on request available), REQ/GNT for 7 slots - 400MHz ULV Celeron ultra low power dissipation Operating in system slot as system master and in peripheral slot in PCI passive - 1GHz LV Celeron high performance mode (no communication to CompactPCI bus). All processor versions with passive heat sink. Depending on the processor version forced air cooling at a specific flow rate might be required in the chassis. PMC slot One 32-bit / 33MHz PMC slot Pn1-Pn3, rear I/O Pn3 to J4. Memory 5 V and 3.3 V PCI voltage (default configuration 5V). �� 100 MHz memory speed, Intel 82815 GMCH: - Up to 512 MB SDRAM memory without ECC on one 144-pin SODIMM socket, Supervisory Functions, Clock/Calendar smallest memory size 128 MB Watchdog, software configurable, 125 msec to 256 sec. in 12 steps, generates Onboard 2.5" HDD mounting IRQ, NMI or hardware reset, two stage configuration for NMI and Reset. CompactFlash socket type II Hardware monitor Winbond W83627 for thermal control, fan speed and all onboard 1MB Firmware Hub for BIOS voltages. 8KByte EEPROM for CMOS data storing (for no-battery operation) ICH4 internal RTC (MC146818 compatible), RTC and 256 Byte CMOS RAM with backup, battery replaceable. Connectivity Rear I/O via J3/(J4)/J5 Ethernet: 2x 10/100Base-TX Ethernet controller based on the Intel 82551ER Ethernet 32-bit PCI bus controller. The two ports can be configured J3: PICMG 2.16, VGA, COM1/2, keyboard, mouse, USB3/4 as front or rear I/O (PICMG 2.16). J4: PMC rear I/O �� VGA: Intel 82815 GMCH internal VGA controller providing 2D/3D graphics J5: IDE (secondary), Floppy accelerator, 1280x1024x16/75Hz or 1200x1600x256/60Hz analog output. Hot Swap USB: 4x USB2.0 channels up to 480Mbit/s from ICH4, 2x as front I/O, 2x Support for all signals to allow peripheral boards to be hot swapped. The individual as rear I/O clocks for each slot and access to the backplane ENUM# signal comply with the PS/2: PS/2 for keyboard onboard or rear I/O and mouse legacy support on PICMG 2.1 Hot-Swap specification. rear I/O COM: 2x serial ports - COM1/2 - default RS232, optionally RS485/RS422 Compliancy COM1 on front I/O or both on rear I/O CompactPCI Core Specification PICMG 2.0 Rev. 3.0 IDE: Two EIDE interfaces, UltraDMA/100. CompactPCI Hot Swap Specification PICMG 2.1 R2.0 Primary port: UltraDMA/100 routed to CompactFlash socket and 44- CompactPCI Packet Switching Backplane PICMG 2.16 R1.0 pin, 2mm connector for onboard EIDE 2.5" HDD mounting option Designed to meet or exceed: Secondary port: UltraDMA/100 40-pin, 2.54mm connector onboard - Safety: UL 1950, UL 94, CSA 22.2 No 950, EN 60950, IEC 950 and optional on rear I/O - EMI/EMC: EN 55022 / EN 55024, EN 50081-1 / EN 6100-6-2 Front Panel Functions General COM1: 9-pin D-Sub (RS232, RS422, RS485) Dimensions: 100mm x 160mm VGA: 15-pin D-Sub VGA connector Weight: 320g / 4HP Ethernet: 2x RJ-45 MTBF: tbd USB: 2x 4-pin connectors PMC: opening for PMC front panel LEDs: 2x LAN activity (yellow) and speed (green) Software Support 1x blue LED for hot swap, 1x watchdog, 1x thermal control AMI BIOS with POST codes, setup console redirection to serial port (VT100 mode) 8-LED-field for BIOS POST code or general purpose with CMOS setup access, BIOS parameters saved in EEPROM, diskless, keyboardless, Reset: reset button, guarded videoless operation LAN boot support. Onboard Interfaces Board identification number accessible via EEPROM. - Two IDE connectors supporting Ultra DMA, Ethernet channels switchable via software. one 40pin/2.54mm, one 44 pin/2mm for onboard 2.5 HDD or Flash module Support for Windows� 2000, XP, XP Embedded, Linux�, VxWorks��(other OSs - CompactFlash type II socket may be possible, please contact us for information). - 22-pin connector with all LPC signals - PS/2 5-pinrow keyboard connector Power Consumption - 1x144-pin SODIMM connectors +5V/4W, +3.3V/6W, max. 12W at 400MHz - 3x 64-pin PMC interface +5V/8W, +3.3V/6W, max. 17W at 1.0Hz +12V / -12V not used I/O Table Summary Description Front I/O Rear I/O Onboard Connector Total Environmental Video 11 - 1 o o Operating temp.: 0 C to +60 C standard USB 22 - 4 o o Storage temp.: -55 C to +85 C Serial 12 - 2 Climatic Humidity: non condensing 93% at 40 C (acc. to IEC 60068-2-78) PS/2 Mouse -1 - 1 Altitude: 50,000 ft. (15,240 m) PS/2 Keyboard -1 1 1 Ethernet 22 - 2 ATA100 -1 2 2 CompactFlash -- 1 1 PMC 1 via J4 Pn1-Pn3 1 Floppy -1 - 1 �������� Ordering Information Product Description Order No. CP6500-V ULV Celeron 400MHz, 256KByte L2 cache, 144-pin SODIMM socket, VGA, 2x FastEthernet, 2x USB, 1x COM 28652 1) CP6500-V LV Celeron 1.0GHz, 256KByte L2 cache, 144-pin SODIMM socket, VGA, 2x FastEthernet, 2x USB, 1x COM 28653 Memory Module DMSO-128 SODIMM 128MByte SDRAM 144-pin PC133 24050 DMSO-256 SODIMM 256MByte SDRAM 144-pin PC133 23362 DMSO-512 SODIMM 512MByte SDRAM 144-pin PC133 23810 Rear IO-module CP-CTM80-2 4HP for SCSI (together with PMC261 on CP6500-V) and Ethernet on rear panel 25127 CP-CTM80-2 4HP for SCSI (together with PMC261 on CP6500-V) and PICMG 2.16 27622 CP-CTM80-2 4HP for PIM support and Ethernet on rear panel 29044 CP-CTM80-2 4HP for PIM support and PICMG 2.16 27776 Services CP6-RIO Assembly of connectors J3/J4/J5 and rear IO configuration 27827 CP6-RIO-NOJ4 Assembly of connectors J3/J5 (no J4) and rear IO configuration 27828 Accessories 2) CP6500-V-MK2.5 Mounting kit for 2.5" IDE-HDD onboard, mounting within 4HP 28948 2) CP-HDD-2.5-IDE Notebook-style 2.5" Hard disk in various sizes available for onboard mounting various CFxxx CompactFlash in various memory sizes available various Software 3) KIT-CP6500-V Windows Drivers, setup utilities, user’s manual in PDF format on CD-ROM 28938 3) LIN-BSP-CP6500-V Linux Board Support Package for use with SuSE or RedHat distribution 28940 VXW-BSP-CP6500-V VxWorks Board Support Package for use with Tornado on CD-ROM 28941 1) Not dedicated for longterm projects 2) HDD must be ordered separately 3) Free of charge downloadable from the Internet please contact your local sales representative for other configuration options Corporate Offices US/ Canada Europe, Middle East and Africa Asia Pacific Kontron Modular Computers GmbH 6260 Sequence Drive Oskar-von-Miller-Stra e 1 2F, No. 2, Lane 50, Nankang Rd., Sec. 3 Sudetenstr. 7 San Diego, CA 92121-4371 85386 Eching/Munich Germany Nankang District, Taipei, Taiwan D-87600 Kaufbeuren Tel.: +1 858 677 0877 Tel.: +49 8165 77 0 Tel.: +886 2 2782 0201 Tel.: +49 (0) 8341 803 0 Fax: +1 858 677 0898 Fax: +49 8165 77 219 Fax: +886 2 2782 7486 Fax: +49 (0) 8341 803 499 sales@us.kontron.com sales@kontron.com sales@kontron.com.tw www.kontron.com www.kontron-modular.com Our worldwide sales representatives and partners can be found on our websites. www.kontron.com Publication Version 12/2004 Copyright � 2004 Kontron AG. All rights reserved. Printed in Germany. All data is for information purposes only and not guaranteed for legal purposes. Information has been carefully checked and is believed to be accurate; however, no responsibility is assumed for inaccurancies. Kontron and the Kontron logo are registered trademarks of Kontron AG. All other brand or product names are trademarks or registered trademarks or copyrights by their respective owners and are recognized. Specifications are subject to change without notice.