➤ CP6016 ® Intel® Core™2 Duo 6U CompactPCI PICMG 2.16 Processor Blade CompactPCI ➤ Breakthrough 45nm Technology Processor Intel® Core™2 Duo Penryn processor, 2.53 GHz, FSB 1066MHz ➤ Best Performance Through Server Class Chipset Up to 16 GByte dual-channel, 667MHz Registered DDR2 ECC memory ➤ Highest Versatility and Excellent Power Management Comprehensive I/O capabilities: PCIe, GigEthernet, PMC/XMC, USB, VGA, SATA RAID, USB NAND Flash … ➤ Broad Software Support Complete Board Support Packages for On Board Hardware and Toolchain If it’s embedded, it’s Kontron Channel A Channel B 2nd Boot Flash ➤ 45nm Processor Technology now in 6U CompactPCI Benefit from the latest technology Intelligent Platform Management 2.16 support) provide comprehensive that achieves highest processor Interface) the CPU board meets the connectivity capabilities, enabling highest demands for the management of innovative applications today by offering performance at optimized power high-availability applications. Many of enough room for the emerging next consumption. The power of two cores these are data and tele-communications generation requirements. enables virtualization and applications, but also include highly multithreading applications to run in Highly versatile, the CP6016 can be used sensitive, security related solutions as in a system or peripheral slot. A rich set full 64-lbit mode using Enhanced well as image processing systems in of LEDs at the front panel for debug and Intel® Virtualization, Dynamic medical technology and other vertical diagnostic, as well as full rear I/O Acceleration Technology and industries. connectivity completes the CP6016. SpeedStep®. Unique Versatility Longterm Availability Greater Performance / Watt The highly integrated CP6016 features a Delivering a stable product based on Compared to previous processor designs XMC site according to XMC.3 supporting Intel's embedded product line, the the 45nm dual-core Penryn technology x8 PCI Express (alternatively a 64-bit/ CP6016 ensures long term availability. allows much better performance at 133MHz PCI PMC site), an onboard 2.5- This eliminates the risk of unplanned similar power consumption. inch SATA hard disk and USB NAND Flash design changes and unexpected The PICMG 2.16-compliant Kontron device - all usable at the same time in a expensive application modification. CP6016 offers up to 16 GB dual-channel single slot. While minimizing deployment risks, the 667 MHz DDR2 registered ECC memory via The Intel ICH9R I/O Controller Hub CP6016 provides a broad range of two SO-RDIMM sockets, providing up to provides advanced I/O technology software support to ease the process of 8.5 GB/sec data throughput. The CP6016 including USB 2.0 and Serial ATA300. Five product integration and maximize the is designed for bandwidth intensive independent Gigabit Ethernet ports (3x competitive advantage of meeting the applications and thanks to hotswap ports at the front and 2x for full PICMG time-to-market window. support and IPMI (PICMG 2.9- compliant ➤ ➤ Front Panel Functional Block Diagram Hot FP 2x 1000BT 1000BT 1000BT Swap LEDs RJ-45 VGA RJ-45 RJ-45 RJ-45 USB Front Panel DDR2 REG w ECC one SO-RDIMM RS-232 Mag. Mag. Mag. USB EEP Flash socket 64 kbit 1 MB NAND 667 MHz / PC2-5300 Flash 2 SPI I C CRT DDR2 REG w ECC 2 one SO-RDIMM I C Intel® Intel® socket VGA GbE DDR2 GbE 667 MHz / PC2-5300 ES1000 FPGA 82574L 82571EB SMC/BMC Board Control 2 I C Debug x1 x4 COM PCI XDP 2 I C DDR2 DDR2 PCIe PCIe PCI USB x1 32bit/33MHz Super IO Temp. Sensor onboard 1066 Intel® LPC ICH9R Intel® 5100 MHz LPC DMI DMI FSB Core™2 Duo (Intel® 82801IR) MCH 2.53 GHz 1st 2nd uEFI BIOS uEFI BIOS Temp. FLASH SPI FLASH TPM Sensor 4 MB 4 MB CPU PCIe 6 x4 x4 6xSATA USB SMB EEP x8 x4 x4 Temp. Sensor chipset PCIe PCIe Intel® 2.5" to to GbE SATA PCI / PCIX PCI / PCIX PI7C9X130 PI7C9X130 82571EB HDD site PCI PCI 64-bit/133 MHz 64-bit/66 MHz PMC/XMC SATA PCI/PCIX Conn. Hot Mag. Mag. 64-bit up to 133MHz Swap XMC x8 cPCI Connector IPMB 2x COM / PS/2 4x SATA 4x USB VGA / CRT Rear I/O PCI 64-bit/66 MHz GbE GbE 3.3V / 5V VIO ➤ Specification Processor IPMI Intel Penryn SV Processor in uFBGA package IPMI 1.5-compliant for IPMI based management and CompactPCI System (45 nm manufacturing process) Management PICMG 2.9 R1.0 2.53 GHz, 1066 MHz FSB, 6 MB L2 cache H8S/2166 controller with on-chip 512 kB Flash and external 8 Mbit SPI Flash Memory Controller Hub TPM Intel 5100 chipset with dual-channel DDR2 memory controller with ECC, six Trusted Platform Module (TPM) 1.2 for enhanced hardware and software x4 PCI Express ports based data and system security I/O Controller Hub I/O Summary Table Intel ICH9R, 6x SATA II controllers, 7x USB 2.0, one x1 PCI Express, LPC, Description Front I/O Rear I/O Onboard Total HDA Connector Memory Video CRT VGA 1 1 - 1 USB 2.0 2 4 1 (Flash) 7 System Dual channel registered DDR2 memory with ECC and data HDAudio - 1 - 1 Memory speed of 667 MHz per channel, and up to 16 GB on two Serial 1 2 - 2 SO-RDIMM sockets PS/2 Mouse - 1 - 1 USB Flash Up to 8 GB NAND Flash Module PS/2 Keyboard - 1 - 1 Ethernet 3 2 - 5 Flash BIOS Two redundant 4 MByte SPI Flashes SATA - 4 2 6 EEPROM Serial EEPROM (24LC64) 64 kbit USB Flash - - 1 1 Front Panel Interfaces PMC / XMC - 1 / 1 1 / 1 FAN control - 2 - 2 Gigabit Ethernet Three 1000BASE-T Ethernet on the FP Battery Input - 1 - 1 Serial Port One RS232 interface on RJ45 connector SMB - 1 optional - 1 optional USB interface Two USB 2.0 ports, 4-pin standard USB host Compliancy VGA One 15-Pin D-Sub connector for analog monitors; CompactPCI Core Specification PICMG 2.0 Rev. 3.0 ATI ES1000 graphic controller with PCI 32-bit / 33MHz CompactPCI Hot Swap Specification PICMG 2.1 R2.0 interface CompactPCI System Management PICMG 2.9 R1.0 Reset button One reset button CompactPCI Packet Switching Backplane PICMG 2.16 R1.0 Micro Switch For Hot Swap Designed to meet or exceed: LEDs Eight bicolor (red and green) control and status LEDs - Safety: UL 1950, UL 94, CSA 22.2 No 950, EN 60950, IEC 950 Two IPMI LEDs - EMI/EMC: EN 55022 / EN 55024, EN 50081-1 / EN 6100-6-2 One Watchdog and one thermal LED General Four GP LEDs Dimensions: 233 x 160 x 20.5 mm, 6U, 4HP One blue hot Swap LED Weight: 900g Onboard Interfaces Software Support Gigabit Ethernet Two PICMG 2.16 rear I/O 1000BASE-T ports - AMI EFI (BIOS) with POST codes, setup console redirection to serial port SATA Four ports fixed to rear I/O (VT100 mode) with CMOS setup access, BIOS parameters saved in One port routed to a standard SATA connector EEPROM, diskless, keyboardless, videoless operation One port available for mounting an optional 2.5” HDD - LAN boot support USB NAND Flash One port available for mounting an optional NAND Flash - Board identification number accessible via EEPROM module - Support for Windows® XP, XP Embedded, Windows® Server 2003, Linux® Serial Ports Two RS232 ports: (other OSs may be possible, please contact us for information) COM1 routed to front panel and rear I/O Power Consumption COM2 routed to rear I/O only Maximum: 64 watts; typically: =< 50 watts CPCI Bus PICMG 2.0 Rev. 3.0 compatible, 64-bit / 66 MHz Universal V(I/O) 5V or 3.3V signalling Environmental Operating in system slot as system master and in periph- Operating temp.: 0°C to +60°C, passive module heat sink, requires eral slot in PCI passive mode (no communication to Com- forced airflow cooling pactPCI bus) Storage temp.: - 55°C to + 85°C (without battery or HDD) PMC/XMC One 64-bit / 133 MHz PMC slot, Pn1-Pn4, rear I/O Pn3 to Climatic Humidity: 93% RH at 40°C, non condensing J4, 3.3 volt V(I/O) (acc. to IEC 60068-2-78) Alternatively one XMC slot via P15, supporting XMC.3 x8 Altitude: 50,000 ft (15,240 m) PCIExpress Rear I/O J3: PICMG 2.16, VGA, COM 1/2, keyboard, mouse, 4x USB J4: PMC rear I/O J5: 4x SATA, HDA, battery, fan control Supervisory Functions, Clock/Calendar Watchdog, software configurable, 125 msec to 256 sec, generates IRQ or hardware reset. Hardware monitor for thermal control, fan speed, and all onboard voltages RTC battery backup ➤ Ordering Information Product Description Order Number CPU Boards CP6016-2.53-2G 6U 4TE CPCI Core™2 Duo T9400 System Master CPU; 2.53GHz, 6MB L2, 2GB DDR2 667 MHz SO-RDIMM; 1022-4886 I/O: 5x GigE, VGA, COM, 7x USB, 6x SATA, USB Flash Sockel, J1-J5 CP6016-2.53-4G 6U 4TE CPCI Core™2 Duo T9400 System Master CPU; 2.53GHz, 6MB L2, 4GB DDR2 667 MHz SO-RDIMM; 1022-4887 I/O: 5x GigE, VGA, COM, 7x USB, 6x SATA, USB Flash Sockel, J1-J5 CP6016-2.53-8G 6U 4TE CPCI Core™2 Duo T9400 System Master CPU; 2.53GHz, 6MB L2, 8GB DDR2 667 MHz SO-RDIMM; 1022-4888 I/O: 5x GigE, VGA, COM, 7x USB, 6x SATA, USB Flash Sockel, J1-J5 Services 1) 1) 1022-5510 CP6016-MK2.5SATA Mounting kit for 2,5” SATA-HDD onboard, mounting within 4HP Rear Transition Modules CP-CTM80-3 Various 4HP versions available 29973 2x GbE, 2x COM, VGA, 2x USB, PS/2, Speaker, 2x SATA Software Support 2) 2) KIT-CP6016-WIN Documentation and 32-bit Windows (XP, Server 2003) driver kit on CD-ROM 1022-5519 2) 2) KIT-CP6016-WINXPE Documentation and 32-bit Windows XP EMBEDDED driver kit on CD-ROM 1022-6303 2) 2) KIT-CP6016-LIN Documentation and 32 bit Linux BSP for Suse and RedHat distributions on CD-ROM 1022-5520 (other operating systems) Other operating systems support kits (e.g. 64bit versions) on project request 1) HDD must be ordered separately 2) Free of charge, downloadable from the Internet Please contact your local sales representative for other configuration options. ➤➤ Corporate Offices Europe, Middle East and Africa North America Asia Pacific Kontron Modular Computers GmbH Kontron AG Kontron America Corporate Office Asia Pacific Kontron Modular Computers GmbH Oskar-von-Miller-Str. 1 14118 Stowe Drive 4F, No. 415, Ti-Ding Blvd., Sudetenstr. 7 85386 Eching/Munich Germany Poway, CA 92064-7147 Sec.2, NeiHu District D-87600 Kaufbeuren Taipei, Taiwan 114 Tel. +49 (0)8165-77 777 Tel. +1-888-294 4558 Tel. +886-2-2799-2789 Tel. +49 (0)8341 - 803 0 Fax +49 (0)8165-77 219 Fax +1-858-677 0898 Fax +886-2-2799-7399 Fax +49 (0)8341 - 803 499 sales@kontron-emea.com sales@us.kontron.com sales@kontron.com.tw sales@kontron-emea.com CP6016-0708 RG Copyright © 2008 Kontron AG. All rights reserved. All data is for information purposes only and not guaranteed for legal purposes. Information has been carefully checked and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Kontron and the Kontron logo and all other trademarks or registered trademarks are the property of their respective owners and are recognized. Specifications are subject to change without notice.