CP306-RIO - KONTRON - Elite.Parts

Description

KONTRON CP306-RIO Pentium M 1.4GHz, LV, 2MByte L2 cache, 512MByte DDR-SDRAM, Rear I/O routing to J2

Part Number

CP306-RIO

Price

Request Quote

Manufacturer

KONTRON

Lead Time

Request Quote

Category

COMPACTPCI / PICMG 2.16 » CPCI/2.16 BLADES & RTM

Specifications

Bus Interface

PICMG 2.0 Rev. 3.0 compatible, 32-bit/33MHz System master 5V VI/O (3.3V on request), 7 Req/Gnt & clock lines Version with rear I/O on J2 PICMG 2.0

Connector

4HP board: Ethernet: 1st: Intel82541PI based 10/100/1000MBit/s Gigabit Ethernet controller at front 2nd:Intel82801DB ICH4 10/100Base-TX Ethernet controller (based on 82559; front or rear IO) VGA: Intel82855GME GMCH internal VGA controller providing 2048x1536x8bit/60Hz resolution, max. shared memory 64MB USB: 4x USB2.0 channels up to 480Mbit/s, 2 as front IO, 2 as rear IO COM: UART with two 16C550 compatible RS232 ports as rear IO IDE: Two EIDE interfaces, Ultra ATA\100, 100MB/sec Primary port ATA\33 connected to CompactFlash socket & rear IO Secondary port ATA\100 40-pin, 2.54mm connector onboard 8HP additions: COM: Additional 2 COM ports (front IO), 4 COM ports in total PS/2: PS/2 for keyboard and mouse legacy support (front IO) IDE: Secondary port ATA\100 two 40-pin, 2.54mm connector s, one for onboard 2.5" EIDE Flash Disk or HDD mounting option, anotherone for external devices like CD-ROM Floppy: Standard Floppy connector LPT: The parallel port is accessible as onbo

Cooling

CompactPCI Core Specification PICMG 2.0 Rev. 3.0 CompactPCI Hot Swap Specification PICMG 2.1 R2.0 Designed to meet or exceed: - Safety: UL 1950, UL 94, CSA 22.2 No 950, EN 60950, IEC 950 - EMI/EMC: EN 55022 / EN 55024, EN 50081-1 / EN 6100-6-2"

Environment

Operating temp.: 0C to +60C standard -40C to +85 C E2 (optional, 1.4GHz LV) Storage temp.: -55C to +85C Climatic Humidity: non condensing 93% at 40 C (acc. to IEC 60068-2-78) Altitude: 50,000 ft. (15,240 m)

Max Data Transfer Rate

333 MHz memory speed, Intel 82855GME GMCH 512MByte or 1GByte soldered DDR-SDRAM with ECC CompactFlash socket type II (Flash or Microdrive HDD) Onboard 2.5" HDD mounting within 8HP 1MB Firmware Hub for BIOS 8KByte EEPROM for CMOS data storing (no battery operation)

Max. Speed

Phoenix BIOS with QuickBoot, QuietBoot, BootBlock, MultiBoot III, PC Health Monitoring, Serial port remote control with CMOS setup access, BIOS parameters saved in EEPROM, diskless, keyboardless, videoless operation. LAN boot support. USB Floppy boot, USB memory stick boot. Plug&Play capability. Board identification number accessible via EEPROM Support for Windows 2000, XP Pro, XP Embedded, Linux, VxWorks, (other OS’s may be possible, please contact us for information).

Memory

Dimensions: 100mm x 160mm Weight: 300g / 4HP, 400g / 8HP MTBF: 117,000h

Miscellaneous

4HP: Ethernet: Two RJ-45 with integrated LEDs (ACT, SPEED) Top connector: VGA-CRT 15-pin D-Sub SVGA connector USB: Two 4-pin connectors LED·s: ACT, SPEED (LAN), Thermal, Watchdog or both general purpose 8HP: Additional to 4HP COM1/2: Two 9-pin D-Sub (RS232/422/485 jumper selectable) Keyb/Mouse: PS/2 Reset: Reset button, guarded LED: HDD active

Support for all signals to allow peripheral boards to be hot swapped. The individual clocks for each slot and access to the backplane ENUM# signal comply with the PICMG 2.1 Hot-Swap specification.

Power Mode

+5V/ 7W, +3.3V/ 6W, typ. 13W at 1.4GHz +5V/ 8W, +3.3V/ 9W, max. 17W at 1.4GHz +5V/17W, +3.3V/5W, typ. 22W at 1.8GHz +5V/27W, +3.3V/9W max. 36W at 1.8GHz +12V / -12V not used

Processor

Intel Pentium M
Mobile low power PentiumM processor in Micro-FCBGA 479 package 2x 32KB L1 cache and 2MByte L2 cache, 400MHz processor system bus. Long term available versions: - 1.4GHz LV low power dissipation, extended temperature range option - 1.8 GHz Maximum internal junction temperature 100C All board versions are passive cooled with fanless heatsink within 4HP height. Forced air cooling at a specific flow rate is required depending on the processor version.

Socket

Watchdog, software configurable, 125 msec to 256 sec. in 12 steps, generates IRQ, NMI or hardware reset, two stage configuration for NMI and Reset Hardware monitor LM87 for thermal control, fan-sense and all important onboard voltages ICH4 internal RTC (MC146818 compatible), RTC and 256 Byte CMOS RAM with backup, battery replaceable

System Monitor

PCI and LPC (Low Pin Count - the ISAbus replacement) build the connection between the basic CPU board with any I/O extension module, resulting in a double slot (8HP) solution.

Wake On LAN

The Rear I/O versions support: - 32-bit/33 MHz CompactPCI interface - Two USB ports - One Fast Ethernet port without LED - Primary EIDE Port - Two COM ports (TTL level) - CRT VGA port - One fan control input - One general purpose output - Input for external backup battery

Features

1x Fast Ethernet (front or rear IO)
1x Gigabit Ethernet (front IO)
4x USB 2.0
COM1/2 as rear IO (4HP board)
COM3/4 RS232/422/485 as front IO (8HP)
Intel® 82855GME chipset with internal graphic controller, resolution 2048 x 1536 x 8bit/60Hz, max. shared memory 64MB
More value with new Pentium M processor and 855GME chipset
Pentium M at 1.8GHz equals in computing performance a Pentium 4 at 2.6GHz to 2.8GHz
Pentium M with 2MB L2 cache up to 1.8GHz
Up to 1GB direct soldered DDR-SDRAM/ECC at 333MHz

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products