Part Number | CP306-E2 |
---|---|
Manufacturer | KONTRON |
Category | COMPACTPCI / PICMG 2.16 » CPCI/2.16 BLADES & RTM |
Price | Request Quote |
Lead Time | Request Quote |
Kontorn CP306-E2 CPU Board. Intel Pentium M 1.4GHz, LV, 2MByte L2 cache, 512MByte DDR-SDRAM, -40 C/+85 C
Once you accept your quote and confirm your order, we prepare by retrieving related parts and components from our inventory. Anything we do not currently have in stock is sourced.
Upon receipt, all parts are visually inspected for damage and then photographed to document their condition. Parts acquired from vendors must meet our quality standards.
Industrial computer boards and other parts we are equipped to evaluate are tested to verify functionality and discover possible damage.
Industrial computer boards have all components with low MTBF numbers (such as capacitors and connectors) replaced and are washed in our PCB cleaner to remove dust and grime.
Industrial computer boards are fully diagnosed and repaired by our engineers. Logs of the problems encountered and solutions implemented are recorded.
Industrial computer boards have all I/O connections rigorously tested to ensure that everything is working properly before the board is certified as ready to ship.
After photos are taken to document the exterior condition of the part, it is packaged and sent to the customer. ESD-safe materials are used to protect sensitive equipment on its journey.
Elite.Parts is a website of GID Industrial, an ISO 9001:2015-certified company that has specialized in servicing industrial computer boards and providing other industrial products for sectors including manufacturing, defense, aerospace, entertainment, healthcare, and more by utilizing our combined skills and vast international network of trusted suppliers since our founding in 2015.
Do you need a CP306-E2? We can help you find it at a competitive price!
Bus Interface | PICMG 2.0 Rev. 3.0 compatible, 32-bit/33MHz System master 5V VI/O (3.3V on request), 7 Req/Gnt & clock lines Version with rear I/O on J2 PICMG 2.0 |
---|---|
Connector | 4HP board: Ethernet: 1st: Intel82541PI based 10/100/1000MBit/s Gigabit Ethernet controller at front 2nd:Intel82801DB ICH4 10/100Base-TX Ethernet controller (based on 82559; front or rear IO) VGA: Intel82855GME GMCH internal VGA controller providing 2048x1536x8bit/60Hz resolution, max. shared memory 64MB USB: 4x USB2.0 channels up to 480Mbit/s, 2 as front IO, 2 as rear IO COM: UART with two 16C550 compatible RS232 ports as rear IO IDE: Two EIDE interfaces, Ultra ATA\100, 100MB/sec Primary port ATA\33 connected to CompactFlash socket & rear IO Secondary port ATA\100 40-pin, 2.54mm connector onboard 8HP additions: COM: Additional 2 COM ports (front IO), 4 COM ports in total PS/2: PS/2 for keyboard and mouse legacy support (front IO) IDE: Secondary port ATA\100 two 40-pin, 2.54mm connector s, one for onboard 2.5" EIDE Flash Disk or HDD mounting option, anotherone for external devices like CD-ROM Floppy: Standard Floppy connector LPT: The parallel port is accessible as onbo |
Cooling | CompactPCI Core Specification PICMG 2.0 Rev. 3.0 CompactPCI Hot Swap Specification PICMG 2.1 R2.0 Designed to meet or exceed: - Safety: UL 1950, UL 94, CSA 22.2 No 950, EN 60950, IEC 950 - EMI/EMC: EN 55022 / EN 55024, EN 50081-1 / EN 6100-6-2" |
Environment | Operating temp.: 0C to +60C standard -40C to +85 C E2 (optional, 1.4GHz LV) Storage temp.: -55C to +85C Climatic Humidity: non condensing 93% at 40 C (acc. to IEC 60068-2-78) Altitude: 50,000 ft. (15,240 m) |
Max Data Transfer Rate | 333 MHz memory speed, Intel 82855GME GMCH 512MByte or 1GByte soldered DDR-SDRAM with ECC CompactFlash socket type II (Flash or Microdrive HDD) Onboard 2.5" HDD mounting within 8HP 1MB Firmware Hub for BIOS 8KByte EEPROM for CMOS data storing (no battery operation) |
Max. Speed | Phoenix BIOS with QuickBoot, QuietBoot, BootBlock, MultiBoot III, PC Health Monitoring, Serial port remote control with CMOS setup access, BIOS parameters saved in EEPROM, diskless, keyboardless, videoless operation. LAN boot support. USB Floppy boot, USB memory stick boot. Plug&Play capability. Board identification number accessible via EEPROM Support for Windows 2000, XP Pro, XP Embedded, Linux, VxWorks, (other OS’s may be possible, please contact us for information). |
Memory | Dimensions: 100mm x 160mm Weight: 300g / 4HP, 400g / 8HP MTBF: 117,000h |
Miscellaneous | 4HP: Ethernet: Two RJ-45 with integrated LEDs (ACT, SPEED) Top connector: VGA-CRT 15-pin D-Sub SVGA connector USB: Two 4-pin connectors LED·s: ACT, SPEED (LAN), Thermal, Watchdog or both general purpose 8HP: Additional to 4HP COM1/2: Two 9-pin D-Sub (RS232/422/485 jumper selectable) Keyb/Mouse: PS/2 Reset: Reset button, guarded LED: HDD active |
OS | Support for all signals to allow peripheral boards to be hot swapped. The individual clocks for each slot and access to the backplane ENUM# signal comply with the PICMG 2.1 Hot-Swap specification. |
Power Mode | +5V/ 7W, +3.3V/ 6W, typ. 13W at 1.4GHz +5V/ 8W, +3.3V/ 9W, max. 17W at 1.4GHz +5V/17W, +3.3V/5W, typ. 22W at 1.8GHz +5V/27W, +3.3V/9W max. 36W at 1.8GHz +12V / -12V not used |
Processor | Mobile low power PentiumM processor in Micro-FCBGA 479 package 2x 32KB L1 cache and 2MByte L2 cache, 400MHz processor system bus. Long term available versions: - 1.4GHz LV low power dissipation, extended temperature range option - 1.8 GHz Maximum internal junction temperature 100C All board versions are passive cooled with fanless heatsink within 4HP height. Forced air cooling at a specific flow rate is required depending on the processor version. |
Socket | Watchdog, software configurable, 125 msec to 256 sec. in 12 steps, generates IRQ, NMI or hardware reset, two stage configuration for NMI and Reset Hardware monitor LM87 for thermal control, fan-sense and all important onboard voltages ICH4 internal RTC (MC146818 compatible), RTC and 256 Byte CMOS RAM with backup, battery replaceable |
System Monitor | PCI and LPC (Low Pin Count - the ISAbus replacement) build the connection between the basic CPU board with any I/O extension module, resulting in a double slot (8HP) solution. |
Wake On LAN | The Rear I/O versions support: - 32-bit/33 MHz CompactPCI interface - Two USB ports - One Fast Ethernet port without LED - Primary EIDE Port - Two COM ports (TTL level) - CRT VGA port - One fan control input - One general purpose output - Input for external backup battery |
Any product names, logos, brands, and other trademarks or media featured or referred to on Elite.Parts are the property of their respective owners.
GID Industrial is not an authorized distributor, reseller, or representative for the products featured on this site, and is not affiliated with, sponsored by, or endorsed by any of the manufacturers or holders of the rights to the aforementioned products.
All information on this site is displayed strictly for identification purposes and does not indicate a relationship with or an approval from any third parties.