Manufacturers
KONTRON CP306
Description
Kontron CP306 CPU Board. 3U CompactPCI | Intel Pentium M | 2MB L2 cache | up to 1.8GHz
Part Number
CP306
Price
Request Quote
Manufacturer
KONTRON
Lead Time
Request Quote
Category
COMPACTPCI / PICMG 2.16 » CPCI/2.16 BLADES & RTM
Specifications
Bus Interface
PICMG 2.0 Rev. 3.0 compatible, 32-bit/33MHz System master 5V VI/O (3.3V on request), 7 Req/Gnt & clock lines Version with rear I/O on J2 PICMG 2.0
Connector
4HP board: Ethernet: 1st: Intel82541PI based 10/100/1000MBit/s Gigabit Ethernet controller at front 2nd:Intel82801DB ICH4 10/100Base-TX Ethernet controller (based on 82559; front or rear IO) VGA: Intel82855GME GMCH internal VGA controller providing 2048x1536x8bit/60Hz resolution, max. shared memory 64MB USB: 4x USB2.0 channels up to 480Mbit/s, 2 as front IO, 2 as rear IO COM: UART with two 16C550 compatible RS232 ports as rear IO IDE: Two EIDE interfaces, Ultra ATA\100, 100MB/sec Primary port ATA\33 connected to CompactFlash socket & rear IO Secondary port ATA\100 40-pin, 2.54mm connector onboard 8HP additions: COM: Additional 2 COM ports (front IO), 4 COM ports in total PS/2: PS/2 for keyboard and mouse legacy support (front IO) IDE: Secondary port ATA\100 two 40-pin, 2.54mm connector s, one for onboard 2.5" EIDE Flash Disk or HDD mounting option, anotherone for external devices like CD-ROM Floppy: Standard Floppy connector LPT: The parallel port is accessible as onbo
Cooling
CompactPCI Core Specification PICMG 2.0 Rev. 3.0 CompactPCI Hot Swap Specification PICMG 2.1 R2.0 Designed to meet or exceed: - Safety: UL 1950, UL 94, CSA 22.2 No 950, EN 60950, IEC 950 - EMI/EMC: EN 55022 / EN 55024, EN 50081-1 / EN 6100-6-2"
Environment
Operating temp.: 0C to +60C standard -40C to +85 C E2 (optional, 1.4GHz LV) Storage temp.: -55C to +85C Climatic Humidity: non condensing 93% at 40 C (acc. to IEC 60068-2-78) Altitude: 50,000 ft. (15,240 m)
Max Data Transfer Rate
333 MHz memory speed, Intel 82855GME GMCH 512MByte or 1GByte soldered DDR-SDRAM with ECC CompactFlash socket type II (Flash or Microdrive HDD) Onboard 2.5" HDD mounting within 8HP 1MB Firmware Hub for BIOS 8KByte EEPROM for CMOS data storing (no battery operation)
Max. Speed
Phoenix BIOS with QuickBoot, QuietBoot, BootBlock, MultiBoot III, PC Health Monitoring, Serial port remote control with CMOS setup access, BIOS parameters saved in EEPROM, diskless, keyboardless, videoless operation. LAN boot support. USB Floppy boot, USB memory stick boot. Plug&Play capability. Board identification number accessible via EEPROM Support for Windows 2000, XP Pro, XP Embedded, Linux, VxWorks, (other OS’s may be possible, please contact us for information).
Memory
Dimensions: 100mm x 160mm Weight: 300g / 4HP, 400g / 8HP MTBF: 117,000h
Miscellaneous
4HP: Ethernet: Two RJ-45 with integrated LEDs (ACT, SPEED) Top connector: VGA-CRT 15-pin D-Sub SVGA connector USB: Two 4-pin connectors LED·s: ACT, SPEED (LAN), Thermal, Watchdog or both general purpose 8HP: Additional to 4HP COM1/2: Two 9-pin D-Sub (RS232/422/485 jumper selectable) Keyb/Mouse: PS/2 Reset: Reset button, guarded LED: HDD active
OS
Support for all signals to allow peripheral boards to be hot swapped. The individual clocks for each slot and access to the backplane ENUM# signal comply with the PICMG 2.1 Hot-Swap specification.
Power Mode
+5V/ 7W, +3.3V/ 6W, typ. 13W at 1.4GHz +5V/ 8W, +3.3V/ 9W, max. 17W at 1.4GHz +5V/17W, +3.3V/5W, typ. 22W at 1.8GHz +5V/27W, +3.3V/9W max. 36W at 1.8GHz +12V / -12V not used
Processor
Intel Pentium M 1.8GHz
Mobile low power PentiumM processor in Micro-FCBGA 479 package
2x 32KB L1 cache and 2MByte L2 cache, 400MHz processor system bus.
Long term available versions:
- 1.4GHz LV low power dissipation, extended temperature range option
- 1.8 GHz
Maximum internal junction temperature 100C
All board versions are passive cooled with fanless heatsink within 4HP height.
Forced air cooling at a specific flow rate is required depending on the processor version.
Socket
Watchdog, software configurable, 125 msec to 256 sec. in 12 steps, generates IRQ, NMI or hardware reset, two stage configuration for NMI and Reset Hardware monitor LM87 for thermal control, fan-sense and all important onboard voltages ICH4 internal RTC (MC146818 compatible), RTC and 256 Byte CMOS RAM with backup, battery replaceable
System Monitor
PCI and LPC (Low Pin Count - the ISAbus replacement) build the connection between the basic CPU board with any I/O extension module, resulting in a double slot (8HP) solution.
Wake On LAN
The Rear I/O versions support: - 32-bit/33 MHz CompactPCI interface - Two USB ports - One Fast Ethernet port without LED - Primary EIDE Port - Two COM ports (TTL level) - CRT VGA port - One fan control input - One general purpose output - Input for external backup battery
Features
- 1 MB onboard FWH for BIOS
- 400 MHz processor system bus
- 4HP or 8HP, 3U CompactPCI
- 855GME and 82801 (ICH4) chipset
- Analog display support up to 2048 x 1536 pixels at 16-bit and 60 Hz
- Compatible with CompactPCI spec. Rev. 3.0
- Extended temperature range: -40°C to + 85°C (optional)
- Four USB ports
- Hardware Monitor (LM87)
- I/O extension connector (LPC, AC97 Link)
- Integrated 3D high performance VGA controller
- Intel Pentium M microprocessor up to 1.8 GHz
- Jumperless board configuration
- Onboard CompactFlash type II socket (True IDE with DMA)
- One 32-bit PCI-to-PCI bridge at 33 MHz
- One Fast Ethernet interface (82559-style)
- One Gigabit Ethernet interface (82541PI)
- Passive heat sink solution
- PCI extension connector
- Phoenix BIOS
- Real-time clock
- Several rear I/O configurations
- Two COM ports on Rear I/O (with an optional two on the front I/O on 8HP version)
- Two EIDE Ultra ATA/100 interfaces
- Two Front USB 2.0
- Two Rear I/O USB 2.0
- Up to 1024 MB DDR SDRAM memory running at 333 MHz (PC2700)
- Up to 2048 kB L2 cache on-die, running at CPU speed
- Watchdog timer
Datasheet
Extracted Text
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the CP306 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Kontron CP6001-R2-1.2-1G-E2 CPU Board - R2-Level, Intel Core Duo U2500 ULV 1.2 GHz, 1GB soldered Mem...
Kontron CP6003-SA 4HP Rear I/O Module for CP6003 with 1xDVI-D; 2xUSB2.0; 2xGbE; socket for SATA 2.5”...
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods