KONTRON CP303-EXT-CRT

 CP303 / CP303-V 3U Mobile Pentium® III / Celeron® CPU  Pentium® III processors up to 800 MHz and 512KB L2 cache  CP303: Extended temperature and shock/vibration resistant  CP303-V: Optimized design for cost sensitive applications If it‘s Embedded, it‘s Kontron.  Multi-controller CPU Robust design Kontron‘s CompactPCI CP303 CPU represents a major advance in high end industrial PC integration. The CP303 3U CompactPCI system controller board combines the perfor- mance of Intel‘s Mobile Pentium® III processor with the high integration of the 815E chipset and the I/O Controller Hub 2. Computing performance The low voltage Pentium® III processors offers the same performance like the desktop version, but dissipates only half of the thermal. Its ability to go up to higher ambient temperatures makes it possible to reach extended temperature ranges and together with its directly soldered BGA package it enables sufficient space for a passive heatsink. Graphic performance The 4HP board supplies the 815E integrated graphics accelerator with dynamic memory video technology. CP303: Shock resistance CP303-V CP303 The direct soldered processor and me- mory provide a higher shock/vibration- resistance than socket devices can. CP303-V: The value line Selecting value oriented components the CP303-V is tailored for cost-sensitive applications without compromising on the processor performance. An Ethernet channel integrated in the I/O controller hub, graphic support coming along with the chipset, memory as a pure socket version enables a compact design giving all the advantages of a low power solution. CP303/CP303-V  Technical Specification Processor On-board inter-module interfaces Mobile low voltage Pentium® III, Micro-FCBGA 478, 512KByte full speed L2 on-die AGP, PCI and LPC (Low Pin Count - the ISAbus replacement) build the connection cache. Based on the 0.13u silicon process with 1.15V core voltage (or even 0.95V for between the basic CPU board with any I/O extension module, resulting in a double slot the ULV version) resulting in lower power dissipation. (8HP) solution. All processor versions with passive heat sink Rear I/O via J2 CP303: The Rear I/O versions support: - 32-bit/33 MHz CompactPCI interface - 800MHz LV low power dissipation CP303-V: - Two USB ports - Two COM ports (TTL level) - 400MHz ULV Celeron ultra low power dissipation - CRT VGA port Depending on processor version forced air cooling at a specific flow rate might be - One fan control input - One general purpose output required in the chassis. Memory - Input for external backup battery 133 MHz processor side bus, Intel® 82815 GMCH CP303: - Two Ethernet ports without LED CP303: 256MByte soldered SDRAM (no ECC) 256MByte SDRAM via 144-pin SODIMM CP303-V: 1MB Firmware Hub for general purpose - One Ethernet port without LED CompactPCI Bus Interface CP303-V: up to max. 512MByte SDRAM via 144-pin SODIMM Optional CompactFlash socket type II or onboard 2.5“ HDD mounting PICMG 2.0 Rev. 3.0 compatible, 64-bit/33MHz System master 1MB Firmware Hub (FWH) for BIOS 5V VI/O (3.3V on request), 7 Req/Gnt & clock lines Version with rear I/O on J2 PICMG 2.0 256 Byte EEPROM for CMOS data storing (no battery operation) 256 Byte EEPROM for user purpose Supervisory Functions, Clock/Calendar Connectivity Watchdog, software configurable, 125 msec to 256 sec. generates IRQ, NMI or hardware reset, two stage configuration for NMI and Reset CP303 and CP303-V: Intel® 82801 ICH2 providing the following functions: Hardware monitor LM81 for thermal control, fan speed and all onboard voltages Processor temperature monitoring MAX1617 (on-die and board) - 10/100Base-TX Ethernet controller RTC and CMOS RAM with backup, battery replaceable - Two EIDE interfaces, Ultra ATA 100, 100MB/sec - Two USB controllers, 4 ports, USB1.1 compliant Hot Swap Support for all signals to allow peripheral boards to be hot swapped. The individual UART with two 16C550 compatible RS232 ports clocks for each slot and access to the backplane ENUM# signal comply with the PICMG CP303: 2.1 Hot-Swap specification. Intel® 82559 based 10/100Base-TX Ethernet controller Compliancy 4HP: 82815 GMCH providing 2D/3D graphics accelerator, CompactPCI Core Specification PICMG 2.0 Rev. 3.0 1280x1024x16/75Hz or 1200x1600x256/60Hz analog and digital CompactPCI Hot Swap Specification PICMG 2.1 R2.0 output Designed to meet or exceed: 8HP IOIDE: IDE, Floppy, LPT port as onboard pin row Safety: UL 1950, CSA 22.2 No 950, EN 60950, IEC 950 Onboard 2.5“ EIDE Flash Disk or HDD mounting option EMI/EMC: EN 55022 / EN 55024, EN 50081-1 / EN 6100-6-2 PS/2 for keyboard and mouse legacy support General Additional 2 COM ports (front IO), 4 COM ports in total Dimensions: 100mm x 160mm, Jumperless design Front Panel Functions Weight: 300g / 4HP 4HP with CP303: MTBF: 101,000 h Ethernet: Two RJ-45 with integrated LEDs (ACT, SPEED) Software Support Top connector: VGA-CRT 15-pin D-Sub SVGA connector Award BIOS with POST codes, setup console redirection to serial port (VT100 mode) with USB: Two 4-pin connectors CMOS setup access, BIOS parameters saved in EEPROM, diskless, keyboardless, videoless LEDs: ACT, SPEED (LAN), Thermal, Watchdog or both general purpose operation. LAN boot support. 4HP with CP303-V: Board identification number accessible via EEPROM Ethernet: One RJ-45 with integrated LEDs (ACT, SPEED) Support for Windows® 2000, XP, Linux®, VxWorks® Top connector: VGA-CRT 15-pin D-Sub SVGA connector Power Consumption USB: Two 4-pin connectors +5V/4W, +3.3V/6W, max. 10W at 400MHz LEDs: ACT, SPEED (LAN), Thermal, Watchdog or both general purpose +5V/8W, +3.3V/6W, max. 14W at 800MHz 8HP-IOIDE (in addition to 4HP): Environmental COM1/2: 9-pin D-Sub (RS232/422/485 jumper selectable) Operating temp.: 0°C to +60°C standard Keyboard/Mouse: PS/2 -40°C to +85°C E2 (optional) Reset: Reset button, guarded Storage temp.: -55°C to +95°C LED: HDD active Climatic Humidity: non condensing 93% at 40°C (acc. to IEC 60068-2-78) Altitude: 50,000 ft. (15,240 m) CP303/CP303-V  Ordering Information Product Description Order-No. CPU Baseboard 1) CP303 LV Mobile Pentium® III-M 800MHz, 512KByte L2 cache, 256MByte SDRAM soldered 23694 1) CP303-V ULV Celeron 400MHz, 256KByte L2 cache, 144-pin SODIMM socket 27873 Frontpanel CP303-EXT-CRT 4HP front panel extension module for CP303 (2x Ethernet, 2x USB, LED‘s, VGA) 23704 CP303-EXT-IOIDE 8HP for CP303 (additional to 4HP COM1/2, PS/2, Reset button, Floppy port, parallel port) 23707 CP303-V-EXT-CRT 4HP front panel extension module for CP303-V (1x Ethernet, 2x USB, LED‘s, VGA) 28215 CP303-V-EXT-IOIDE 8HP for CP303-V (additional to 4HP COM1/2, PS/2, Reset button, Floppy port, parallel port) 28217 Memory DMSO-128 SODIMM 128MByte SDRAM 144-pin PC133 24050 DMSO-256 SODIMM 256MByte SDRAM 144-pin PC133 23362 DMSO-512 SODIMM 512MByte SDRAM 144-pin PC133 23810 CFxxx CompactFlash in various memory sizes available various CP-HDD-2.5-IDE Notebook-style 2.5“ Hard disk 40GB or higher for board mounting 22531 CP-ADAP-ATA100 IDE cable for ATA 100 (40 pin connector with 80 lines, 3x40 pin connectors, length 0.6m) 23671 2) KIT-CP303 Board Support Packages for Windows 2000 and XP, CP303 / CP303-V User‘s Manual 23702 2) LIN-BSP-CP303 Linux Board Support Package, CP303 / CP303-V User‘s Manual 25491 VXW-BSP-CP303 VxWorks 5.5 Board Support Package, CP303 / CP303-V User‘s Manual 23703 1) Note: A front panel extension module must be ordered in conjunction with the basic CPU board. Other configuration options for volume orders are available on request. 2) Free download from http:// www.kontron.com  Corporate Offices Europe, Middle East & Africa North America Asia Pacific Kontron Modular Computers GmbH Oskar-von-Miller-Str. 1 14118 Stowe Drive 17 Building,Block #1,ABP. Sudetenstr. 7 85386 Eching/Munich Poway, CA 92064-7147 188 Southern West 4th Ring Road 87600 Kaufbeuren Germany USA Beijing 100070,P.R.China Germany Tel.: +49 (0)8165/ 77 777 Tel.: +1 888 294 4558 Tel.: + 86 10 63751188 Tel.: +49 (0)8341/ 803-0 Fax: +49 (0)8165/ 77 219 Fax: +1 858 677 0898 Fax: + 86 10 83682438 Fax: +49 (0)8341/ 803-499 sales@kontron.com sales@us.kontron.com kcn@kontron.cn sales@kontron.com www.kontron.com #CP303/CP303-V#01072008PDL Copyright© 2008 Kontron AG. All rights reserved. Printed in Germany. All data is for information purposes only and not guaranteed for legal purposes. Information has been carefully checked and is believed to be accurate; however, no responsibility is assumed for inaccurancies. Kontron and the Kontron logo are registered trademarks of Kontron AG. All other brand or product names are trademarks or registered trademarks or copyrights by their respective owners and are recognized. Specifications are subject to change without notice.