R A dvanced TCA AT8402 AdvancedTCA carrier board with 4 x Mid-Size AdvancedMC support AdvancedTCA / AdvancedMC Open Modular Solutions Built for Maximum Design Versatility The Kontron AT8402 carrier board is a PICMG 3.0 and 3.1 compliant node board for AdvancedTCA shelves, supporting > PICMG 3.0/3.1-compliant base 4 AdvancedMC Mid-Size slots, ideal for a multitude of application and fabric carrier board requirements. > Four (4) Mid-Size AMC slots AdvancedMC-Everywhere integration for customization With support for four AdvancedMC modules, the AT8402 provides equipment > PCI-Express and Gigabit manufacturers with exceptional flexibility to customize the design of their Ethernet switching network applications. The AT8402 supports a wide assortment of AdvancedMC modules used for processing, storage and I/O applications. A prime example > Redundant Base Interface, and is for the AT8402 to be configured for RAID 5 storage using three (3) SAS AMC dual redundant Fabric Interface Mid-Size modules and one (1) Processor Mid-Size AMC. This enables quick > Telco Clock for all AMC slots and reliable look up times of wireless customer information integrated into HLR/HSS network elements already built on open modular platforms. > Full Hot-Swap capabilities Full Redundancy and High Availability > Management via SNMP, TELNET, Suitable for dual-star and full-mesh configurations in 14- and 16-slot systems, CLI, eitheer In-band or Out of the AT8402 is hot swappable, supports full redundancy, and provides PCI- band via 10/100Base-T Ethernet Express and Gigabit Ethernet connectivity. With full IPMI 1.5 support, the or RS232 AT8402 also fearures a dedicated μController as an additional Firmware Update Manager (FWUM) for field upgrades, rollbacks and watchdog functions. > IPMI version 1.5 support If it´s Embedded, it´s Kontron. AT8402 Technical Information - Switchable PCI Express clock source to all AMCs and to adjacent Standards Compliance Ethernet This board is compatible to the following standards: board via Update Channel 4 - PICMG 3.0 Advanced Telecommunications Computing IPMI Architecture (ATCA) - Dedicated μController - PICMG 3.1 opt. 3 Ethernet/Fibre Channel for AdvancedTCA Systems - PICMG 3.0 / IPMI 1.5 compliant - AMC.0 Advanced Mezzanine Card Base Specification - Dedicated μController as additional Firmware Update Manager - AMC.1 PCI Express and Advance Switching (FWUM) for field upgrades, rollbacks and watchdog functions - D0.96 of AMC.2 Revision 1.0 Gigabit Ethernet AMC Sites - D0.9d of AMC.3 Revision 1.0 Storage - 4 Slot carrier with partial PCB cutaway in the AMC area - IPMI v1.5 - B+ connectors (will be updated to press fit connectors as soon as available) - PCI-Express 1.0a - AMC.1 Type 4E2S1 on AMC B1 and B3 Building Blocks - AMC.1 Type 8E2S2 support on AMC B2 and B4 - Ethernet Switch - Telecom clocks and/or PCI Express clock support - PCI-Express Infrastructure RTM Sites - SAS/SATA Infrastructure - 3 TYCO/ERNI ZD-F-4-10-2-B-22 Connectors. - Ethernet Switch Controller + Memory - Support for 8 RTM lanes from each AMC - Synchronous Clock Distribution - FE and RS232 (RJ45) management ports - AMC sites - 4x SAS / SATA connections - RTM sites (Zone 3) - 12V and 3V3sus Supply Voltage connections - IPMI - I²C support - Power Supply Mezzanine incl. Holdup Circuit - JTAG and production I/O support Etherne t Switch Power Supply Mezzanine - Broadcom Strataswitch/StrataGX Gigabit Layer-2 Switch - Isolated 48V to 12V Standard Quarterbrick intermediate - PCI 32b/66MHz Management IF bus converter - Line rate switching for all packet sizes and conditions - Hot swap support - Supports 2 Base Channels 10/100/1000Base-T via external - ‘Holdup’ Circuit using high voltage Capacitor and charge pump Copper PHY - 48V power Supply ‘ORing’ circuit - Supports 2 Fabric Channels with 4 1000Base-BX each via - Point of load regulators for secondary supply voltages (derived internal SERDES from 12V intermediate rail) on base board - Supports 2 AMC GbE interfaces per AMC slot Software & Firmware - Supports 2 SGMII interfaces to the RTM The system shall support IPMI version 1.5 for board level - PHY for Base Interface Connections management (PICMG 3.0). PCI-Express Infrastructure - Reliable field upgrades for all software components - 32-Lane PCI-Express Switch - Dual boot images with roll-back capability - Serial EEPROM for Configuration Data - Management via SNMP and Command Line Interface - Supports 8 PCI-Express Lanes to AMC B2 and B4 - System access via TELNET, SSH and serial line - Supports 4 PCI-Express Lanes to AMC B1 and B3 - Hot-Swap support - Supports 4 PCI-Express Lanes to SAS Controller - Hot-Plug support for AMC modules SAS/SATA Infrastructure - Redundancy support for base and extension fabric switches - 3.0 Gbit/s Serial Attached SCSI Controller Environmental - 3.0 Gbit/s Serial Attached SCSI Expander Operating Storage and Transit - SAS controller connected to PCI Express switch via 4 -40 to +70°C / -10 to PCI Express Lanes Temperature*: 0 °C to 55 °C 158°F* - SAS Expander connected to SAS Controller via 4 SAS Lanes 15%-90% (non-conden- 15%-90% (non-conden- Humidity*: - SAS Expander connects to each AMC slot via 1 SAS Lane sing) at 55°C (131°F) sing) at 55°C (131°F) 2 SAS lanes can be used via RTM Altitude*: 4000 m (13,123 ft) 15,000m / 49,212 ft - AMC B1 and B2 as well as B3 and B4 are directly interconnected via SATA SAS connection 30G/11 ms half sine Shock*: 50G, 170 inches/second - Onboard SAS/SATA MUX for initiator selection trapezoidal Ethernet Switch Controller and System Memory 5 to 100Hz: 1G @ 0.25 5 to 50Hz: 0.5G @ 0.1 Vibration*: - Socketless PowerPC IBM PPC405GP 400 MHz Octave/minute Octave/minute - 256 MBytes SDRAM 133 MHz; 64 MB Flash (supports multiple OS *Meet or exceed images); used for switch provisioning and diagnostics Targeted MTBF is 150,000h @ 30°C, calculations based on Bellcore/ Synchronous Clock and PCI Express Clock Distribution Telcordia SR-332 Issue 1 - Multi-service Line Card PLL Mechanical - MLVDS Buffer (8U x 280 mm x 30.48 mm) - CPLD for clock distribution and control - PCI Express compliant clock source with optional Spread Spectrum Clock Corporate Offices US/ Canada Asia Pacific Europe, Middle East & Africa 14118 Stowe Dr Far East Science Park, 2nd Floor No.2, Lane50, Oskar-von-Miller-Straße 1 85386 Eching/Munich - Germany Poway, CA 92064-7147 Nan Kang Road Section 3 Nan Kang District Taipei, Taiwan Tel.: +49 (0)8165 77 0 Tel.: (858) 677-0877 Tel: +886 2 2782 0201 Fax: (858) 677-0898 Fax: +886 2 2782 7486 Fax: +49 (0)8165 77 279 sales@us.kontron.com sales@kontron.com.tw sales@kontron.com www.kontron.com AT8402 - Doc V 1.1 - 2009 All data is for information purposes only and not guaranteed for legal purposes. Subject to change without notice. Information in this datasheet has been carefully checked and is believed to be accurate; however, no responsibilty is assumed for inaccurancies. All brand or product names are trademarks or registered trademarks of their respective owners.