» AT8050 « » AT8050 « ATCA Node Blade — Two Feature-Rich Processor Options: — Single Intel® Xeon® Six-Core 5600 Series — Single Intel® Xeon® Quad-Core 5500 Series » Optimized for Virtualization » 8 threads (5500) to 12 threads (5600) » Support for up to 48 GB on 3-channels, DDR3 1066 MHz, ECC, registered SDRAM on 6 DIMM sockets total » 1 X Mid-size AdvancedMC bay » Dual 10 Gigabit on Fabric (PICMG 3.1, Option 9) » Hot Swap SAS/SATA HDD available via RTM8050 If it’s embedded, it’s Kontron. AT8050 AT8050 AdvancedTCA / AdvancedMC Open Modular Solutions The Kontron AT8050 AdvancedTCA processor board redefines The overall performance of the Kontron AT8050 will handle the design possibilities with a new Intel® microarchitecture even the most demanding storage, medical imaging, security, processor, which offers greater efficiency and performance. and communications infrastructure applications. The AT8050 is a single-socket design with two feature-rich With the available AdvancedMC bay, wireless/telecom processor options: an Intel Xeon Quad-Core 5500 (45nm) equipment manufacturers can add multiple functionality with processor; or an Intel Xeon Six-Core 5600 (32nm) processor. an assortment of Kontron AMC modules such as the Kontron Both feature an Integrated Memory Controller, Turbo Boost AM42xx series of Intelligent packet processor AMC modules, Technology, Intel® QuickPath interconnect, and Intel® designed with the OCTEON Plus 5650 Network Service MIPS Hyper-Threading Technology (SMT). Processor from Cavium Networks. Technical Information Single Intel® Xeon® Six-Core 5600 (12 MB Cache) Processor Processor Single Intel® Xeon® Quad-Core 5500 (8 MB Cache) Processor Passive heatsink Virtualization Technology supported Intel® 5520 I/O Hub (36D) and I/O Controller Hub (ICH10R) Chipset CPU QuickPath Interconnect delivering up to 5.86 GT/s/lane Bus interface PCIe Expansion slots 1 Mid-size AdvancedMC bay x4 PCI Express 2x1000Base-BX Ports common option, 4x1000Base-BX in fat pipe Dual port SAS/SATA System Memory Up to 48 GB on 6 latching sockets of VLP DDR-3 1066MHz RDIMM SDRAM ECC and S4EC/D4ED support 3 DDR-3 channels; 2 DIMM per channel Flash Memory Two redundant flash BIOS (Field software upgradeable) Roll back functionality controlled by IPMC 4 ports SAS/SATA available using RTM with the LSISAS1064e Storage USB SSD Flash daughter board (4GB minimum with many available sizes) iSCSI via 82599 fabric interface; SATA AMC with ICH10 controller I/O Front Panel: Serial (RJ-45), 2 i82576 Management LAN (RJ-45), 2 USB PCIe Gen2 (5Gb/s) in Update Channel (AMC Carrier ATCA blade) Intel i82599 10Gb/s or 1Gb/s Ethernet Controller to Fabric Interface Two Intel i82576EB 1Gb/s to the Base Interface Synchronisation Clocks Interface support Reliability MTBF: > 105 000 hours @ 40°C/104°F (Telcordia SR-332, issue 2); no hard-disk Safety / EMC Safety: CB report to IEC 60950-1: 2005, CE Mark to EN 60950-1:2006, meets or exceeds UL/CSA 60950-1; EMC: FCC Part 15, Class B; CE Mark to EN 300 386, EN 55022 and EN 55024; meets GR-1089 (NEBS) Board Specifications PICMG 3.0R3 / 3.1 Option 9, Option 2 PICMG AMC.0R2 / AMC.1 Type 4/ AMC.2 Type E2 & Type 4 compliant/ AMC.3 PICMG HPM.1; IPMI 2.0 NEBS Level 3 (designed for); CP-TA TPM 1.1 Target Certifications RTM Hot Swap SAS/SATA Hard Disk; 2x USB, 2x SFP, SAS controller; PCI Express Hot Plug; Serial RJ-45; and external SAS connector 2 www.kontron.com AT8050 Technical Information BIOS AMI BIOS Warm reset support with memory protection for post-mortem analysis Save CMOS in non-volatile memory option Boot from Ethernet PXE (Base and Fabric interfaces and management Lan) Boot from Ethernet iSCSI (Base and Fabric interfaces) Boot from SAS; and boot from USB 2.0 (Floppy, CD-ROM, Hard Disk) Diskless, Keyboard less, and battery less operation extensions System and LAN BIOS shadowing Robust BIOS flash Update with rollover capability (HPM.1); Fail safe field updateable BIOS Advanced Configuration and Power Interface (ACPI 1.0, 2.0 & 3.0) Console redirection to serial port (VT100)with CMOS setup access, and SOL (Serial over LAN) Event (correctable/uncorrectable ECC, POST errors); log support to IPMC OS Compatibility Red Hat Enterprise Linux V.5.4, Wind River PNE Linux 2.0 IPMI Features Management Controller compliant IPMI v2.0 and design to meet CP-TA TPM v1.1. Remote control capability (power on-off /clean shutdown/warm reset/cold reset) via any IPMI channels including LAN when the payload power is off. Full speed 115200 bps Serial Over LAN (+LAN access to BIOS menu setup) and IPMI Over LAN (IPMI v2.0) always available. Serial data caching and replay to ease software application troubleshooting and post mortem analysis. BIOS Post Code error sent to shelf manager System Event Logging. Configurable automatic “clean ACPI shutdown” policy on disk storage deactivation (AMC or RTM). Full standard PCIe Hot Plug operation embedded with PICMG AMC/RTM activation. Robust IPMI firmware Update with rollover capability, without any payload impact (HPM.1). Override configuration for activation of the board/AMC/RTM without Shelf Manager Intervention. Supervisory Supports a system management interface (KCS interrupt driven) via an IPMI V2.0 compliant controller. Standard IPMI Watchdog for all CPU running phase (BIOS execution / OS loading and running). IPMI Hardware system monitor (power/voltages), memory and all critical components temperature is monitored. Extensive sensors monitoring (around 100 IPMI sensors) and event generation base on thresholds and discrete reading. Warranty Two years limited warranty Power Requirements Intel Xeon 5500: 120 W* -38V @ -72V with 12GB of memory, no RTM & no AMC. Max of 225W * The power consumption will vary depending on your product configuration (AMC, RTM & extra memory) Environmental Operating Storage and Transit Temperature* 0 to 55 °C / 32 to 131°F -40 to 70°C / -10 to 158°F 5% to 93% @40°C / 104°F 5% to 95% @40°C / 104°F Humidity* non-condensing non-condensing Altitude* 4 000m / 13,123 ft 15 000m / 49,212 ft Shock* 3G each axis 18G each axis 5-200Hz. 0.2G, each axis 5 Hz to 20 Hz @ 1 m2/s3 (0.01 g2 /Hz) (flat) 20 Hz to 200 Vibration* Hz @ -3 dB/oct (slope down) Airflow Chassis CP-TA Class B.4 * Designed to meet or exceed. CORPORATE OFFICES Europe, Middle East & Africa North America Asia Pacific Oskar-von-Miller-Str. 1 14118 Stowe Drive 17 Building,Block #1,ABP. 85386 Eching/Munich Poway, CA 92064-7147 188 Southern West 4th Ring Road Germany USA Beijing 100070, P.R.China Tel.: +49 (0)8165/ 77 777 Tel.: +1 888 294 4558 Tel.: + 86 10 63751188 Fax: +49 (0)8165/ 77 279 Fax: +1 858 677 0898 Fax: + 86 10 83682438 info@kontron.com info@us.kontron.com info@kontron.cn 3 www.kontron.com #AT8050# 03232010PM All data is for information purposes only and not guaranteed for legal purposes. Subject to change without notice. Information in this datasheet has been carefully checked and is believed to be accurate; however, no responsibilty is assumed for inaccurancies. All brand or product names are trademarks or registered trademarks of their respective owners.