KONTRON AM5030

Description
Kontron AM5030 CPU Board-The AM5030 AdvancedMC processor module is equipped w/ the next generation Intel Xeon processor LC5518 providing outstanding server-class processing power.
Part Number
AM5030
Price
Request Quote
Manufacturer
KONTRON
Lead Time
Request Quote
Category
PRODUCTS - A
Specifications
AMC
PICMG AMC.0: Advanced Mezzanine Card Specification R2.0, PICMG AMC.1: PCI Express and Advanced Switching R1.0, PICMG AMC.2: Gigabit Ethernet R1.0, PICMG AMC.3: Storage Interfaces R1.0
ATCA
12 V payload power, 3.3 V management power
Board Weight
Full-size: approx. 600 grams
CE
EN55022, EN55024, EN61000-6-2/-6-3, EN300386, EN60950-1
Climatic Humidity
IEC60068-2-78
Dimensions
Dimensions without retention screws on front panel: Full-size: 180.6 mm x 148.5 mm x 28.95 mm
EEPROM
Serial EEPROM (24LC64) 64 kbit
FCLKA
Bidirectional PCI Express clock configuration
Flash (BIOS)
Two redundant 8 MB SPI Flash chips (2 x 8 MB) for uEFI BIOS controlled by the MMC
Form Factor
Double full-size AMC module
Front Panel Gigabit Ethernet
Two 1000BASE-TX on RJ45 connector
Graphic
Silicon Motion SM750 via PCI Express x1,maximum resolution of 1920 x 1440 pixels and embedded 16 MB DDR on-chip memory
Humidity
Operational: 5%-90% (non-condensing), Non-Operating: 5%-95% (non-condensing)
I/O Extension
The I/O extension holds the following interfaces: SATA, USB, LPC interface and some power and control signals, battery input
IPMI
IPMI Intelligent Platform Management Interface Spec. V2.0, IPMI - Platform Management FRU Information Definition V1.0
LEDs
Three Module Management LEDs, Four User-Specific LEDs, Ethernet LEDs
MicroTCA
PICMG MTCA.0 Micro Telecommunications Comp. Architecture R1.0, PCI Express: PCI Express Base Specification Revision 1.0a
MMC
NXP LPC2368 controller with on-chip 512 kB Flash and 56 kB RAM
MTBF
for further information please contact our sales team
NAND Flash
Up to 32 GB SLC NAND Flash on a dedicated SATA NAND Flash module
Onboard Controllers: 10Gb Ethernet
One Intel 82599EB Dual 10 GbE x8 PCI Express bus controller (Code name Niantic)
Onboard Controllers: Gigabit Ethernet
One Intel 82580EB Quad Gigabit Ethernet PCI Express bus controller: Two interfaces routed to front I/O connectors, Two interfaces routed to the AMC connector
Onboard Debug Interface
JTAG port for processor emulation probe connection, Serial POST Code (LVTTL) interface on the AMC port 14
PCI Express
One x4 PCI Express interface on AMC ports 4-7 (Fat Pipes Region)
Platform Controller Hub
Intel Platform Controller Hub Ibex Peak 3420. Used interfaces on the AM5030: Five SATA ports, three USB 2.0 ports, one PCI-Express x1 port, LPC interface, SPI interface, SMBus
Power Consumption
tbd
Power Supply
12 V payload power, 3.3 V management power
Processor
Intel Xeon
The AM5030 supports the following microprocessor: Intel XEON LC5518 processor with integrated memory controller supporting ECC Quad Core 1.73 GHz, 48W TDP (thermal design power) with 3-channel memory access; available on project request: Dual Core 1.73 GHz LC3528 35W TDP, Single Core 1.73 GHz LC3518 23W TDP (Both versions support a 2-channel memory access.) Intel Turbo Mode technology, Up to 8 MB Shared Last Level Cache, Three channel DDR3 controller (800/1066 MHz) with ECC support, 1x16, 2x8, or 4x4 PCI Express 2.0 port configuration with 2.5 GT/s or 5 GT/s, Direct Media Interface (DMI) to Ibex Peak
RoHS
Directive 2002/95/EC
SATA
Serial ATA: Serial ATA 2.5 Specification
Serial ATA
Two SATA ports (Common Options Region ports 2-3), Two SATA ports (Extended Options Region ports 12-13)
Serial Port
COM1 (LVTTL) (Extended Options Region port 15)
One RS232 UART interface on 10-pin mini connector
Software
BIOS:AMI uEFI BIOS; IPMI:MMC (Module Management Controller) implementation compliant to PICMG, AMC.0, Kontron own IP, Linux:Generic BSP to be used with various Linux derivates, Verified for RedHat Fedora 13, Redhat Enterprise 6 Beta 2; Windows:Windows 7 (64 bit), Windows 2008 Server R2; WindRiver Linux:PNE 3.x
System Interconnection: Gigabit Ethernet
Two 1000BASE-BX (SerDes) (Common Options Region ports 0-1)
System Memory
Up to three channels DDR3 memory for a maximum of 24 GB (3x 8GB) DDR3 DRAM memory with ECC running at 1066 MHz, Supported are Unbuffered ECC or Registered DDR3 VLP DIMM modules
Temperature range
-5°C to +55°C (standard, depending on processor version and airflow in the system), -40°C to +70°C (storage), passive module heat sink, forced system airflow
TPM
Infineon SLB9635TT TPM 1.2 controller (on request)
UART
EXAR XR16L580IL single UART, 16550 compatible
USB
Two USB 2.0 ports on standard type A connectors
VGA
15-pin D-Sub connector
Watchdog
FPGA-based, software-configurable, two-stage Watchdog w. programmable timeout ranging from 125 ms to 256 s in 12 steps
WEEE
Directive 2002/96/EC
Features
- 2x 10 GbE (XAUI) to backplane
- AMC double-width, full-size solution
- Comprehensive I/O capabilities
- Graphics interface
- Highly integrated server-class processor/chipset platform with 3 memory channel support up to 1066MHz for high bandwidth
- Hyper-threading support and 8MB Last Level Cache
- Optional TPM support
- Quad-Core Intel XEON LC5518 1.73 GHz processor (48 TDP)
- Supporting AMC.1, AMC.2, AMC.3
- Up to 24GB DDR3 memory with ECC
- Up to 32 GByte SATA NAND Flash memory module
Datasheet
Extracted Text
» » A AM M5 50 03 30 0 « « High-End Quad Core Processor AMC based on Intel® XEON LC5518 Server-Class Performance » Intel® XEON Quad Core LC5518 1.73 GHz Massive Data Throughput » Up to 24 GB ECC Memory DDR3 1066 MHz via 3-channel access Comprehensive Connectivity » 2x 10 GbE (XAUI) 4x GbE, 4x SATA, 1x PCIe x4 and more If it’s embedded, it ’s Kontron. AM5030 AM5030 High-End Quad Core Processor AMC based on Intel® XEON LC5518 » Server-Class Performance and Data Throughput GbE interfaces – two available on the front panel, two in accordance with AMC.2 – provide additional networking The AM5030 AdvancedMC processor module is equipped capabilities. with the next generation Intel® Xeon® processor LC5518 which provides outstanding server-class processing Furthermore, the Kontron AM5030 offers connectivity in accordance with AMC.1 (PCIe x4) and AMC.3 (2x SATA). power and maximum performance per Watt for MicroTCA Two USB 2.0 ports, one VGA (D-SUB) and one COM (RJ45) system designs. The AM5030 is highly integrated and available in double-width, full-size form factor. port accessible on the front panel round the extensive feature set out. The Intel® Xeon™ Quad-Core processor LC5518, in tandem The AM5030 can be equipped optionally with an up to with the Intel® 3420 server-class chipset, takes full advantage of processor performance and the high-speed 32 GB SATA NAND Flash memory module which can be screwed to the board. FSB. The 45nm socket processor LC5518 offers 8MB shared Last Level Cache, Hyper-Threading support and Intel Turbo Mode technology. » Applications Designed for compute-intensive applications the versatile AM5030 may be used as a main controller, data server, Supporting a three-channel memory interface for up to 24 GB of ECC memory (DDR3) running at 1066 MHz the traffic processor or media processor in any double- width MicroTCA platform deployed for applications in AM5030 ensures highest memory bandwidth for maximum the 3GSM, triple play, military, police, defense, medical, data throughput. transportation and avionics market segments. Carrier- grade telecommunications, as well as image and video » Connectivity processing applications in the medical, industrial quality Two 10GbE (XAUI) interfaces in accordance with AMC.2 – provide comprehensive networking capabilities. In management and simulation markets also benefit from the processing power and communication capabilities of combination with a 10GbE MicroTCA Carrier Hub, like the the AM5030 processor module. Kontron AM4910, high performance multi-core MicroTCA platforms with massive data throughput are possible. Four 2 www.kontron.com AM5030 Technical Information Form Factor Double full-size AMC module CPU and PCH Processor The AM5030 supports the following microprocessor: Intel XEON LC5518 processor with integrated memory controller supporting ECC Quad Core 1.73 GHz, 48W TDP (thermal design power) with 3-channel memory access available on project request: » Dual Core 1.73 GHz LC3528 35W TDP » Single Core 1.73 GHz LC3518 23W TDP Both versions support a 2-channel memory access » Intel Turbo Mode technology » Up to 8 MB Shared Last Level Cache » Three channel DDR3 controller (800/1066 MHz) with ECC support » 1x16, 2x8, or 4x4 PCI Express 2.0 port configuration with 2.5 GT/s or 5 GT/s » Direct Media Interface (DMI) to Ibex Peak Platform Controller Hub Intel Platform Controller Hub Ibex Peak 3420. Used interfaces on the AM5030: Five SATA ports, three USB 2.0 ports, one PCI-Express x1 port, LPC interface, SPI interface, SMBus Memory System Memory Up to three channels DDR3 memory for a maximum of 24 GB (3x 8GB) DDR3 DRAM memory with ECC running at 1066 MHz Supported are Unbuffered ECC or Registered DDR3 VLP DIMM modules NAND Flash Up to 32 GB SLC NAND Flash on a dedicated SATA NAND Flash module Flash (BIOS) Two redundant 8 MB SPI Flash chips (2 x 8 MB) for uEFI BIOS controlled by the MMC EEPROM Serial EEPROM (24LC64) 64 kbit Onboard Controllers 10Gb Ethernet One Intel 82599EB Dual 10 GbE x8 PCI Express bus controller (Code name Niantic) Gigabit Ethernet One Intel 82580EB Quad Gigabit Ethernet PCI Express bus controller » Two interfaces routed to front I/O connectors » Two interfaces routed to the AMC connector Graphic Silicon Motion SM750 via PCI Express x1,maximum resolution of 1920 x 1440 pixels and embedded 16 MB DDR on-chip memory UART EXAR XR16L580IL single UART, 16550 compatible TPM Infineon SLB9635TT TPM 1.2 controller (on request) MMC NXP LPC2368 controller with on-chip 512 kB Flash and 56 kB RAM Watchdog FPGA-based, software-configurable, two-stage Watchdog w. programmable timeout ranging from 125 ms to 256 s in 12 steps System Interconnection 10Gb Ethernet One 10Gb XAUI interface on AMC ports 8-11 (Fat Pipes Region) One 10Gb XAUI interface on AMC ports 17-20 (Extended Options Region) Gigabit Ethernet Two 1000BASE-BX (SerDes) (Common Options Region ports 0-1) Serial ATA Two SATA ports (Common Options Region ports 2-3) Two SATA ports (Extended Options Region ports 12-13) PCI Express One x4 PCI Express interface on AMC ports 4-7 (Fat Pipes Region) Debug Interface One Debug port (Extended Options Region port 14) Serial Port COM1 (LVTTL) (Extended Options Region port 15) FCLKA Bidirectional PCI Express clock configuration Front Panel Interfaces Gigabit Ethernet Two 1000BASE-TX on RJ45 connector VGA 15-pin D-Sub connector USB Two USB 2.0 ports on standard type A connectors Serial Port One RS232 UART interface on 10-pin mini connector LEDs Three Module Management LEDs Four User-Specific LEDs Ethernet LEDs Onboard Interfaces Debug Interface JTAG port for processor emulation probe connection Serial POST Code (LVTTL) interface on the AMC port 14 I/O Extension The I/O extension holds the following interfaces: SATA, USB, LPC interface and some power and control signals, battery input Compliancy ATCA 12 V payload power, 3.3 V management power MicroTCA PICMG MTCA.0 Micro Telecommunications Comp. Architecture R1.0 PCI Express: PCI Express Base Specification Revision 1.0a AMC PICMG AMC.0: Advanced Mezzanine Card Specification R2.0 PICMG AMC.1: PCI Express and Advanced Switching R1.0 PICMG AMC.2: Gigabit Ethernet R1.0 PICMG AMC.3: Storage Interfaces R1.0 IPMI IPMI Intelligent Platform Management Interface Spec. V2.0 IPMI - Platform Management FRU Information Definition V1.0 SATA Serial ATA: Serial ATA 2.5 Specification 3 www.kontron.com AM5030 Technical Information CE EN55022, EN55024, EN61000-6-2/-6-3, EN300386, EN60950-1 Climatic Humidity IEC60068-2-78 WEEE Directive 2002/96/EC RoHS Directive 2002/95/EC General Dimensions Dimensions without retention screws on front panel: Full-size: 180.6 mm x 148.5 mm x 28.95 mm Board Weight Full-size: approx. 600 grams MTBF for further information please contact our sales team Power Supply 12 V payload power, 3.3 V management power Power Consumption tbd Environmental Temperature range -5°C to +55°C (standard, depending on processor version and airflow in the system) -40°C to +70°C (storage) passive module heat sink, forced system airflow Humidity Operational: 5%-90% (non-condensing) Non-Operating: 5%-95% (non-condensing) Software BIOS AMI uEFI BIOS IPMI MMC (Module Management Controller) implementation compliant to PICMG AMC.0, Kontron own IP Linux Generic BSP to be used with various Linux derivates; Verified for RedHat Fedora 13, Redhat Enterprise 6 Beta 2 Windows Windows 7 (64 bit), Windows 2008 Server R2 WindRiver Linux PNE 3.x Ordering Information Article Description Processor Modules Intel XEON LC5518 1.73 GHz, Quad Core, 3x 2 GB SODIMM Module DDR3 1066GHz with ECC, Frontpanel with screws AM5030r-1.73Q-6G AM5030r-1.73Q-12G Intel XEON LC5518 1.73 GHz, Quad Core, 3x 4 GB SODIMM Module DDR3 1066GHz with ECC, Frontpanel with screws AM5030r-1.73Q-24G Intel XEON LC5518 1.73 GHz, Quad Core, 3x 8 GB SODIMM Module DDR3 1066GHz with ECC, Frontpanel with screws (av. Q3/2010) Accessories FLASH-SATA-16GB-AM5030 16 GByte NAND-Flash SATA module FLASH-SATA-32GB-AM5030 32 GByte NAND-Flash SATA module COrPOrATE OFFICES Europe, Middle East & Africa North America Asia Pacific Oskar-von-Miller-Str. 1 14118 Stowe Drive 17 Building,Block #1,ABP. 85386 Eching/Munich Poway, CA 92064-7147 188 Southern West 4th Ring Road Germany USA Beijing 100070, P.R.China Tel.: +49 (0)8165/ 77 777 Tel.: +1 888 294 4558 Tel.: + 86 10 63751188 Fax: +49 (0)8165/ 77 279 Fax: +1 858 677 0898 Fax: + 86 10 83682438 info@kontron.com info@us.kontron.com info@kontron.cn 4 www.kontron.com #AM5030# 27082010AK All data is for information purposes only and not guaranteed for legal purposes. Subject to change without notice. Information in this datasheet has been carefully checked and is believed to be accurate; however, no responsibilty is assumed for inaccurancies. All brand or product names are trademarks or registered trademarks of their respective owners.
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the AM5030 have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods