KONTRON AM4510

Description
Kontron AM4510 Mezzanine Card - AM4510 SATA storage AMC modules uses SATA hard disk drive, and achieves enhanced performance, reliability, ruggedness and power savings.
Part Number
AM4510
Price
Request Quote
Manufacturer
KONTRON
Lead Time
Request Quote
Category
PRODUCTS - A
Specifications
Access
75 microseconds
Altitude (Designed to meet or exceed)
Operating:4,000 m / 13,123 ft; Storage and Transit:15,000 m / 49,212 ft
Characteristics
NEBS level 3; 24 hours / 7 days operation
Compliance
PICMG AMC.0 R2.0 / AMC.3 R1.0
Hard Disk Features
Storage capacity: 32GB and 64GB
Humidity (Designed to meet or exceed)
Operating:15% to 90% @55°C/131°F non-condensing; Storage and Transit:5% to 95% @ 40°C/104°F non-condensing
IPMI Features
Management Controller compliant to PICMG 3.0, AMC.0 and IPMI v1.5 rev 1.1., Management Controller is run time field reprogrammable without payload impact., Robust fail safe reprogrammation implementation (which includes two firmware images) that could perform automatic or manual rollback if a problem occurs during critical reprogramation phase., Remote upgrade capability from all IPMI interfaces (via IPMB)
Mechanical
Dimensions:181.5 x 75 x 30.16 mm, single-width full-size; 181.5 x 75 x 18.96 mm, single-width mid-size; Weight:350 g
Power Requirements
Management power is less than 100mA peak at 3.3V, Payload power is 6W
Safety/EMC
Meet or exceed:Safety: UL 60950-1; CSA C22.2 No 60950-1-03; EN 60950-1:2001; IEC60950-1; EMI/EMC: FCC 47 CFR Part 15, Class B; CE Mark to EN55022/EN55024/EN300386
Sequential Bandwidth R/W
250 / 170 MB/s Sustained 300MB/s burst
Shock (Designed to meet or exceed)
Operating:30G, half-sine 11ms, each axis; Storage and Transit:Bellcore GR-63-CORE Section 4.3
Supervisory
Hardware system monitor through IPMI (voltage, currents, temperature), temperature monitor / alarm; board temperature sensor, power failure.
Temperature (Designed to meet or exceed)
Operating:0-70°C/32-158°F; Storage and Transit:-40 to +70°C/-40 to 158°F
Vibration (Designed to meet or exceed)
Operating:1.0G, 5-500Hz each axis; Storage and Transit:0.5G, 5-50Hz; 3.0G, 50-500Hz each axis
Features
- 32GB and 64GB storage capacity
- Enhanced performance, reliability, ruggedness and power savings
- Intel X25-E SATA Solid State Drive (SSD)
- PICMG AMC.0 R2.0 / AMC.3 R1.0
Datasheet
Extracted Text
» AM4510 « » AM4510 « SSD AMC module for the ultimate in storage performance » Intel® X25-E SATA Solid State Drive (SSD) » 32GB and 64GB storage capacity » PICMG AMC.0 R2.0 / AMC.3 R1.0 » Enhanced performance, reliability, ruggedness and power savings If it’s embedded, it ’s Kontron. AM4510 Superior read/write access times and I/O The popularity of AMC storage solutions continue to evolve The Kontron AM4510 SATA storage AMC modules uses and significant I/O, as well as performance improvement Intel’s leading SSD for Native Serial Advanced Technology when compared to rotating media. Attachment (SATA) hard disk drive, and achieves enhanced performance, reliability, ruggedness and power savings. The new Kontron AM4510 AMC module will be offered with a 64GB storage capacity and will be compatible with Since there are no rotating platters, moving heads, fragile Kontron’s family of AdvancedTCA processor and carrier actuators, unnecessary pinup time or positional seek time blades as described by the PICMG AMC.0 R2.0 and AMC.3 that can significantly slow down the storage subsystem, the R1.0 specifications. Intel X25-E SATA SSD enables fast read/write access times Technical Information Hard Disk Features Storage capacity: 32GB and 64GB Access 75 microseconds Sequential Bandwidth R/W 250 / 170 MB/s Sustained 300MB/s burst Characteristics NEBS level 3; 24 hours / 7 days operation Compliance PICMG AMC.0 R2.0 / AMC.3 R1.0 IPMI Features Management Controller compliant to PICMG 3.0, AMC.0 and IPMI v1.5 rev 1.1. Management Controller is run time field reprogrammable without payload impact. Robust fail safe reprogrammation implementation (which includes two firmware images) that could perform automatic or manual rollback if a problem occurs during critical reprogramation phase. Remote upgrade capability from all IPMI interfaces (via IPMB) Supervisory Hardware system monitor through IPMI (voltage, currents, temperature), temperature monitor / alarm; board temperature sensor, power failure. Mechanical 181.5 x 75 x 30.16 mm, single-width full-size; 181.5 x 75 x 18.96 mm, single-width mid-size; Weight: 350 g Power Requirements Management power is less than 100mA peak at 3.3V Payload power is 6W Environmental Temperature* Operating: 0-70°C/32-158°F; Storage and Transit: -40 to +70°C/-40 to 158°F Environmental Humidity* Operating: 15% to 90% @55°C/131°F non-condensing; Storage&Transit: 5% to 95% @ 40°C/104°F non-condensing Environmental Altitude* Operating: 4,000 m / 13,123 ft; Storage and Transit: 15,000 m / 49,212 ft Environmental Shock* Operating: 30G, half-sine 11ms, each axis; Storage and Transit: Bellcore GR-63-CORE Section 4.3 Environmental Vibration* Operating: 1.0G, 5-500Hz each axis; Storage and Transit: 0.5G, 5-50Hz; 3.0G, 50-500Hz each axis Safety / EMC Meet or exceed: Safety: UL 60950-1; CSA C22.2 No 60950-1-03; EN 60950-1:2001; IEC60950-1 EMI/EMC: FCC 47 CFR Part 15, Class B; CE Mark to EN55022/EN55024/EN300386 Warranty Two years limited warranty * Designed to meet or exceed CORPORATE OFFICES Europe, Middle East & Africa North America Asia Pacific Oskar-von-Miller-Str. 1 14118 Stowe Drive 17 Building,Block #1,ABP. 85386 Eching/Munich Poway, CA 92064-7147 188 Southern West 4th Ring Road Germany USA Beijing 100070, P.R.China Tel.: +49 (0)8165/ 77 777 Tel.: +1 888 294 4558 Tel.: + 86 10 63751188 Fax: +49 (0)8165/ 77 219 Fax: +1 858 677 0898 Fax: + 86 10 83682438 info@kontron.com info@us.kontron.com info@kontron.cn 2 www.kontron.com #AM4510# 05252009PKM All data is for information purposes only and not guaranteed for legal purposes. Subject to change without notice. Information in this datasheet has been carefully checked and is believed to be accurate; however, no responsibilty is assumed for inaccurancies. All brand or product names are trademarks or registered trademarks of their respective owners.
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the AM4510 have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods