KONTRON AM4120
Specifications
AMC
PICMG AMC.0: Advanced Mezzanine Card Specifi cation R2.0, PICMG AMC.1: PCI Express and Advanced Switching R1.0, PICMG AMC.2: Gigabit Ethernet R1.0, PICMG AMC.4: Serial Rapid IO
Board Weight
~280g
CPU and PCH
2GB and 4GB RAM with ECC standard, 8GB on project request, 2x2MB SPI NOR (for Bootloader, fallback configuration), 1x8MB NOR (for VxWorks), 128kB persistent memory standard or not assembled, up to 512kB on project request, 1GB NAND Flash standard or not assembled, 2GB on project request, MicroSD card socket
Dimensions
181.5 mm x 73.5 mm
EMC
Immunity: acc. to EN 55024 and 61000-6-2, Emission: acc. to EN 55022, class B and FCC47, part 15, subpart B
Form Factor
Single width, mid-size module (full size on project request)
Front Panel Interfaces
1xGbE, 1xGbE (routable to Port 1, software selectable, default port 1), COM1, RS232, 4xLEDs: control and status, bi-color (red/green LEDs), 3xLEDs: connected to MMC (healthy, hot swap, out of service)
Humidity Operating
93% RH at 40°C, non condensing, Acc. IEC60068-2-78
IPMI
IPMI Intelligent Platform Management Interface Spec. V2.0, 1.5
MicroTCA
PICMG MTCA.0 Micro Telecommunications Comp. Architecture R1.0
Miscellaneous
Watchdog, timeout 125ms to 4096s in 16 steps, RTC (not buffered)
MTBF
AM4120 311426 h MIL-HDBK-217 FN2 Ground Benign 30°, AM4120 222859 h Bellcore Issue 6 Ground Benign 30°
Operating Temperature
-5°C to +55ºC, Acc. IEC60068-2-1/2; Extended temperature version @1GHz on project request (-40°C…+75°C)
PCI Express
PCI Express Base Specifi cation Revision 1.0
Power Consumption
~17W
Power Supply
12 V payload power, 3.3 V management power
Safety
IEC 60950-1
Shock
15g / 11ms, Acc. to IEC 60068-2-27
Software
Bootloader U-Boot, IPMI, VxWorks 6.9 BSP, Linux LTIB BSP
System Interconnection
Port 0: 1xGbE, Port 1: 1xGbE (routable to front plate, software selectable, default: port 1), Ports 4-7: sRIO or PCIe (DIP switch), Port 14: Debug, Port15: COM2, 3.3V TTL, FCLKA: bidirectional PCIe clock configuration, IPMB-L pins: Spec compliant IPMI; Power supply: 3.3V management power, 12V payload power
Vibration (sinusoidal)
5Hz to 150Hz, 1g, Acc. to IEC 60068-2-6
Features
- 3x GbE: AMC port 0 + 2x Front or port 0,1 + 1x Front
- Extended Temperature Range on project request
- Freescale QorIQ P2020 - dual core @1.2GHz
- microSD card socket
- Processor roadmap until 2018
- Up to 4GB RAM with ECC
- Useable in mangaged (with MCH) and unmanaged (without MCH) systems
Datasheet
Extracted Text
» AM4120 « Universal Processor AMC based on Freescale™ QorIQ Technology Universal and cost effective solution » Freescale™ QorIQ P2020 – dual core @1.2GHz Great Longevity » Processor roadmap until 2018 » microSD card socket Easy implementation » Useable in managed (with MCH) and unmanaged (without MCH) systems If it’s embedded, it ’s Kontron. D Datasheet_AM4120_05okt2011.indd 1 atasheet_AM4120_05okt2011.indd 1 2 22.02.2012 10:09:24 2.02.2012 10:09:24 AM4120 AM4120 Universal cost effective processor AMC module » Universal » Longevity The AM4120 is a universal CPU board implemented as The AM4120 meets highest demands regarding longevity Single Mid-Size Advanced Mezzanine Card (AMC) for due to processor availability at least until 2018, careful MicroTCA applications. The cost optimized design is based component selection and a Mircro SDHC card socket to be on the Freescale ™ QorIQ P2020 Dual Core processor, not affected by regular fl ash discontinuation. The up to 8 based on e500 Power Architecture®. The features of the GbE DDR-3 memory grant as well longevity. AM4120 grant reliability of the application, for example This QorIQ processor module is therefore suitable for through redundant U-Boot. The persistent memory for industrial automation, medical, networking, telecom and cyclic data store work even when they are powered down. military applications. » Flexible » AMC systems The AM4120 is a fl exible solution. The 4x SERDES lines Kontron also offers a choice of AMC systems for the are routed to AMC ports 4 – 7, confi gurable either as AM4120. For instance the OM6060 can be used as entry PCIe (root complex or end point) or SRIO ports (host level platform for operating the AM4120 with point to or agent), for those applications which require close point fabrics PCIe and SRIO in combination with the programming to the chip without extensive overhead. As AM4901 basic MCH which provides Ethernet connectivity well fl exibility is achieved through different options of to all AMC slots. In this system the AM4120 can be booting the OS, either from the Micro SDHC card, the NOR combined with I/O cards, DSP cards and different or the NAND Flash (for rugged applications). The AM4120 processor boards. The OM6120 provides multiple 10Gbit supports up to 3 GbE channels: AMC port 0 + 2x Front or performance over SRIO for up to 12 AMCs in combination port 0,1 + 1x Front. Depending on the application, the with the AM4904–SRIO MCH. This system also allows to AM4120 supports usage in systems with MCH or without switch PCIe fabrics in combination with AM4904-PCIe MCH in order to reduce costs and speed up system MCH. It can be operated with dual MCHs. development. Depending on application requirements the AM4120 is available with Freescale™ P2020 for regular and extended temperature range on project request. AM4120 SINGLE WIDTH PRAMC Front Panel AMC Connector DDR3 SDRAM DDR Config: Port No. up to 4 GB w ECC soldered 2 or 4 GB Common Option SERDES To AMC Port 1 To Front PHY 1 Region 600MHz / 72-bit SERDES DDR3 RJ-45 Mag. RGMII GbE eTSEC 2 Dual Gigabit RGMII Gigabit SERDES Ethernet eTSEC 3 Ethernet 0 RGMII PHY eTSEC 1 PHY GbE RJ-45 Mag. Debug Fat Pipe PEX1 SRIO 4x or Region COP/ 4-7 SRIO1 COP RJ-45 RS232 Freescale PCIe x4 COM JTAG QorIQ CLK CLK PCIe clk MUX FCLKA P2020 Opt. NAND NOR FLASH MRAM FLASH Dual-Core Opt. SSD up to up to up to 512 KB PowerPC Temp. EEP EEP 64 MB RTC 2 GB up to 1.2GHz Sense SYS USER local bus eLBC I2C Extended Option COM Front Panel Region MicroSD LEDs SDHC Card DUART DUART Socket SPI FPGA MSPP80 / DEBUG 14 DEBUG User Board Control COM 15 COM TCLKA TCLKA AMC inlet and board temperature sensors DC/DC converters Default boot Hot Swap SPI / I2C / UART FRU device Blue LED EEP Temp. Temp. redundant 12V PP In: 12 V SPI NOR 64 kB Sense Sense Out: 5 V / 3.3 V / 2.5 V / Out-of-Service Flash 1.5 V / 1.05 V 2 MB SPI Flash Health MMC 3.3V MP 4 MB I2C Hot Swap I2C IPMB-L Switch 2 www.kontron.com D Datasheet_AM4120_05okt2011.indd 2 atasheet_AM4120_05okt2011.indd 2 2 22.02.2012 10:09:25 2.02.2012 10:09:25 AM4120 Technical Information Form Factor Single width, mid-size module (full size on project request) CPU and PCH 2GB and 4GB RAM with ECC standard, 8GB on project request 2x2MB SPI NOR (for Bootloader, fallback confi guration) 1x8MB NOR (for VxWorks) 128kB persistent memory standard or not assembled, up to 512kB on project request 1GB NAND Flash standard or not assembled, 2GB on project request MicroSD card socket System Interconnection Port 0: 1xGbE Port 1: 1xGbE (routable to front plate, software selectable, default: port 1) Ports 4-7: sRIO or PCIe (DIP switch) Port 14: Debug Port15: COM2, 3.3V TTL FCLKA: bidirectional PCIe clock confi guration IPMB-L pins: Spec compliant IPMI Power supply: 3.3V management power, 12V payload power Front Panel Interfaces 1xGbE 1xGbE (routable to Port 1, software selectable, default port 1) COM1, RS232 4xLEDs: control and status, bi-color (red/green LEDs) 3xLEDs: connected to MMC (healthy, hot swap, out of service) Watchdog, timeout 125ms to 4096s in 16 steps Miscellaneous RTC (not buffered) Software Bootloader U-Boot IPMI VxWorks 6.9 BSP Linux LTIB BSP Compliancy MicroTCA PICMG MTCA.0 Micro Telecommunications Comp. Architecture R1.0 PCI Express PCI Express Base Specifi cation Revision 1.0 AMC PICMG AMC.0: Advanced Mezzanine Card Specifi cation R2.0 PICMG AMC.1: PCI Express and Advanced Switching R1.0 PICMG AMC.2: Gigabit Ethernet R1.0 PICMG AMC.4: Serial Rapid IO IPMI IPMI Intelligent Platform Management Interface Spec. V2.0, 1.5 General Dimensions 181.5 mm x 73.5 mm Board Weight ~280g MTBF AM4120 311426 h MIL-HDBK-217 FN2 Ground Benign 30° AM4120 222859 h Bellcore Issue 6 Ground Benign 30° Power Supply 12 V payload power, 3.3 V management power Power Consumption ~17W Environmental Operating Temperature -5°C to +55ºC Acc. IEC60068-2-1/2 Extended temperature version @1GHz on project request (-40°C…+75°C) Humidity Operating 93% RH at 40°C, non condensing Acc. IEC60068-2-78 Vibration (sinusoidal) 5Hz to 150Hz, 1g Acc. to IEC 60068-2-6 Shock 15g / 11ms Acc. to IEC 60068-2-27 EMC Immunity: acc. to EN 55024 and 61000-6-2 Emission: acc. to EN 55022, class B and FCC47, part 15, subpart B Safety IEC 60950-1 Ordering Information Article Description AM4120-1.2D-4-1-128 P2020 1.2GHz dual core, 4GB RAM with ECC, 1GB NAND Flash, 128kB MRAM P2020 1.2GHz dual core, 2GB RAM with ECC, 0GB NAND Flash, 0kB MRAM AM4120-1.2D-2-0-0 VXW-BSP-AM4120 WindRiver VxWorks BSP LIN-BSP-AM4120 Linux BSP based on Freescale package (LTIB) Note: All AM4120 boards provide a microSD card socket. Default delivery state: » sRIO Host (8-bit) on AMC port 4-7 » GbE on AMC port 1 (i.e. only 1xGbE on front panel) Rugged versions on project request: » Extended shock/vibration resistance with specifi c front panel, acc. MicroTCA.1/XR2 » Extended temperature range with 1GHz processor, -40°C…+70°C, acc. MicroTCA.1/XT1 3 www.kontron.com D Datasheet_AM4120_05okt2011.indd 3 atasheet_AM4120_05okt2011.indd 3 2 22.02.2012 10:09:26 2.02.2012 10:09:26 AM4120 CORPORATE OFFICES Europe, Middle East & Africa North America Asia Pacifi c Oskar-von-Miller-Str. 1 14118 Stowe Drive 17 Building,Block #1,ABP. 85386 Eching/Munich Poway, CA 92064-7147 188 Southern West 4th Ring Road Germany USA Beijing 100070, P.R.China Tel.: +49 (0)8165/ 77 777 Tel.: +1 888 294 4558 Tel.: + 86 10 63751188 Fax: +49 (0)8165/ 77 279 Fax: +1 858 677 0898 Fax: + 86 10 83682438 info@kontron.com info@us.kontron.com info@kontron.cn 4 www.kontron.com D Datasheet_AM4120_05okt2011.indd 4 atasheet_AM4120_05okt2011.indd 4 2 22.02.2012 10:09:26 2.02.2012 10:09:26 #AM4120# 02222012WMH All data is for information purposes only and not guaranteed for legal purposes. Subject to change without notice. Information in this datasheet has been carefully checked and is believed to be accurate; however, no responsibilty is assumed for inaccurancies. All brand or product names are trademarks or registered trademarks of their respective owners.
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the AM4120 have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods