KONTRON AM4101

Description
Kontron AM4101 CPU Board - The AM4101 extends the capabilities of solving application requirements significantly by providing three interconnect technologies concurrently.
Part Number
AM4101
Price
Request Quote
Manufacturer
KONTRON
Lead Time
Request Quote
Category
PRODUCTS - A
Specifications
µTCA
PICMG MTCA.0 Micro Telecommunications Comp. Architecture R1.0
AMC
PICMG AMC.0: Advanced Mezzanine Card Specification R2.0, PICMG AMC.1: PCI Express and Advanced Switching R1.0, PICMG AMC.2: Gigabit Ethernet R1.0, PICMG AMC.4: Serial RapidIO
AMC System Interconnect:Gigabit Ethernet
Two Gigabit Ethernet 1000BASE-BX (SerDes) ports, AMC common options region port 0-1
ATCA
PICMG 3.0 AdvancedTCA Base Specification R2.0
Bootflash
Two redundant 4 MB NOR Flash devices, used by the NetBootLoader.
CE
EB55022, EN55024, EN61000-6-2/-6-3, EN300386, EN60950-1
Climatic Humidity
IEC60068-2-78
Com Port
AMC extended options region, port 15
Debug Port
AMC extended options region, port 14
Dimensions
181.5 mm x 73.5 mm
EPROM
Four serial EEPROMs, 64 kbit for system/MMC/application data.
Flash
2 GByte NAND Flash with onboard controller for application code and data (up to 4 GB possible)
Front Panel Gigabit Ethernet
Two Gigabit Ethernet 1000BASE-TX, RJ45 connector
Humidity
Operational: 5%-90% (non-condensing), Non-Operating: 5%-95% (non-condensing)
IPMI
Intelligent Platform Management Interface Specification, V2.0
LEDs
Four control and status bi color (red/green LEDs)
MMC
Microcontroller with dual 512 kB Flash and 40 kB RAM
MMC Module Management Controller
Microcontroller with 40 kB RAM and redundant 512 kB Firmware Flash chips with roll-back functionality. The MMC carries out IPMI commands such as monitoring onboard temperature sensors, board voltages, power supply status and manages hot swap operations. The MMC is accessible via a local IPMB (IPMB-L) and a host Keyboard Style Interface (KCS).
MTBF
223,861h acc. Bellcore Issue 6, Ground Benign, Controlled, 30°C
Onboard Gigabit Ethernet
Four triple-speed Ethernet controllers integrated in MPC8641D
Onboard Memory
DDR2 controller with ECC support, up to 600 MHz, 72 bit
Operating temp.
-5°C to +55°C (depending on system environment), Storage temp.: -55°C to +70°C
PCI Express
One x4 PCI Express interface, AMC fat pipes region port 4-7
PCI Express Base Specification Revision 1.0a
Power Consumption
1.0 GHz, 512 MB mem:max. 27 W at 2m/s airflow; 1.33 GHz, 1 GB mem:max. 27 W at 2m/s airflow; 1.5 GHz, 2 GB mem:max. 39 W at 2m/s airflow
Processor
Freescale MPC8641D
RoHS
Directive 2002/95/EC
Serial
RS232 UART interface, RJ45 connector
Serial Rapid IO
One x4 sRIO interface, AMC fat pipes region port 8-11
Software Support
Netbootloader, configuration stored in EEPROM, Boot order defined via MMC Serial over Lan, Support for Linux, VxWorks
System memory
0.5/1/2 GB soldered DDR2 (up to 600 MHz) memory with ECC
System Processor
Freescale MPC8641D dual-core Power Architecture processor (e600 core) with 128-bit vector processing unit (Altivec), 1 MB L2 cache per core, Freescale MPC8641D processor, 1.32 GHz, 528 MHz platform frequency, Freescale MPC8641D processor, 1.5 GHz, 600 MHz platform frequency; The processor is passively cooled with a fanless heatsink. Forced air cooling at a specific flow rate is required.
Vibration/Shock
IEC60068-2-6 / EIC60068-2-27
Watchdog
FPGA based Software configurable two-stage Watchdog with programmable timeout ranging from 125 msec to 256 sec in 12 steps.
WEEE
Directive 2002/96/EC
Weight
145 g (Mid-Size), 188 g (Full-Size)
Features
- 2 GByte onboard NAND Flash
- AMC Processor Module, Single module, Mid/Full-size
- Comprehensive fabric interfaces Gigabit/PCI-Express/serial RapidIO concurrently
- Excellent monitoring features
- Freescale dual-core MPC8641D PowerPC, 1.5 GHz
- PICMG AMC.0/.1/.2/.4 compliance
- Up to 2 GByte soldered SDRAM memory with ECC running at up to 600 MHz
- VxWorks and Linux support
Datasheet
Extracted Text
» » A AM M4 41 10 01 1 « « Superior Performance » 1.5 GHz Freescale dual-core MPC8641D with Altivec Unparalleled Networking » 4 Gigabit Ethernet channels Excellent Interconnect Capabilities » PCI Express, serialRapidIO and Gigabit Ethernet concurrently If it’s embedded, it ’s Kontron. AM4101 Power Architecture performance on AMC module Dual-Core PowerPC module, AMC.0, AMC.1, AMC.2 and AMC.4 » Superior Performance Express x4 interface assures highest data throughput for The AM4101 is a sophisticated AdvancedMC module I/O intensive applications. The Serial RapidIO x4 interface designed for performance demanding applications such provides high-speed interconnect technology with as protocol processing or data management in ATCA or minimal latency. By offering this comprehensive set of TCA systems. Built around the state-of-the-art Freescale interconnect capabilities the AM4101 is an ideal platform dual-core PowerPC MPC8641D, the board addresses the to solve a wide range of application requirements. ever-increasing need of equipment manufacturers for » AMC everywhere cost-effective and modular processing capabilities. The A comprehensive range of ’AMC everywhere’ ATCA boards, integrated AltiVec technology offers DSP-like computing such as ATCA carrier boards, CPU and hub boards are power demanded by telecommunication switches, speech complementing Kontron’s AMC product portfolio including processing systems, IP telephony gateways or image and the AM4101 module.Optimized on packet-throughput and video processing systems. computing performance, the AM4101 perfectly fits to » Unparalleled Networking the needs of telecom applications such as VoIP solutions Four Gigabit Ethernet channels provide unparalleled and 3Gwireless basestations based on ATCA system networking capabilities. Two channels are routed technology. Moreover, the AM4101 is perfectly suited to to the AMC ports 0 and 1, two are available at the drive a system used for cost optimized communication or front panel. The integrated 10/100/1000 Ethernet general-purpose computing applications. controllers feature advanced apabilities for TCP and UDP » Reliability checksum acceleration, QoS support and packet header A well thought-out design, careful selection of high- manipulation making the board an ideal platform to run quality components in combination with a sophisticated a communication intense client or control application. heat sink ensures highest reliability in a wide operating » Excellent Interconnect Capabilities temperature range. Durable components, first of all the Supporting the PICMG subspecifications AMC.1 (PCI Freescale MPC8641D Power Architecture processor, secure Express) and AMC.2 (Gigabit Ethernet) and AMC.4 superior long-term availability for all applications, where (SerialRapidIO) concurrently for fabric connections, longevity and reliability counts. the AM4101 provides most flexible interconnecting capabilities to the AMC carrier or backplane. The PCI 3 3 2 2 A A 1 1 0 0 B B AM4101 AM4101 Mid-size Full-size 2 www.kontron.com AM4101 Technical Information System Processor Freescale MPC8641D dual-core Power Architecture processor (e600 core) with 128-bit vector processing unit (Altivec) 1 MB L2 cache per core Freescale MPC8641D processor, 1.32 GHz, 528 MHz platform frequency Freescale MPC8641D processor, 1.5 GHz, 600 MHz platform frequency The processor is passively cooled with a fanless heatsink. Forced air cooling at a specific flow rate is required. Memory System memory: 0.5/1/2 GB soldered DDR2 (up to 600 MHz) memory with ECC Flash: 2 GByte NAND Flash with onboard controller for application code and data (up to 4 GB possible) Bootflash: Two redundant 4 MB NOR Flash devices, used by the NetBootLoader. EPROM: Four serial EEPROMs, 64 kbit for system/MMC/application data. Onboard Controller Memory: DDR2 controller with ECC support, up to 600 MHz, 72 bit Gigabit Ethernet: Four triple-speed Ethernet controllers integrated in MPC8641D Watchdog: FPGA based Software configurable two-stage Watchdog with programmable timeout ranging from 125 msec to 256 sec in 12 steps. MMC: Microcontroller with dual 512 kB Flash and 40 kB RAM AMC System Interconnect PCI Express: One x4 PCI Express interface AMC fat pipes region port 4-7 Gigabit Ethernet: Two Gigabit Ethernet 1000BASE-BX (SerDes) ports AMC common options region port 0-1 Serial Rapid IO: One x4 sRIO interface AMC fat pipes region port 8-11 Debug Port: AMC extended options region, port 14 Com Port: AMC extended options region, port 15 Front Panel Interfaces Gigabit Ethernet: Two Gigabit Ethernet 1000BASE-TX, RJ45 connector Serial: RS232 UART interface, RJ45 connector LEDs: Four control and status bi color (red/green LEDs) MMC Module Management Controller Microcontroller with 40 kB RAM and redundant 512 kB Firmware Flash chips with roll-back functionality. The MMC carries out IPMI commands such as monitoring onboard temperature sensors, board voltages, power supply status and manages hot swap operations. The MMC is accessible via a local IPMB (IPMB-L) and a host Keyboard Style Interface (KCS). Compliancy ATCA: PICMG 3.0 AdvancedTCA Base Specification R2.0 µTCA: PICMG MTCA.0 Micro Telecommunications Comp. Architecture R1.0 AMC: PICMG AMC.0: Advanced Mezzanine Card Specification R2.0 PICMG AMC.1: PCI Express and Advanced Switching R1.0 PICMG AMC.2: Gigabit Ethernet R1.0 PICMG AMC.4: Serial RapidIO IPMI: Intelligent Platform Management Interface Specification, V2.0 PCI Express: PCI Express Base Specification Revision 1.0a CE: EB55022, EN55024, EN61000-6-2/-6-3, EN300386, EN60950-1 Vibration/Shock: IEC60068-2-6 / EIC60068-2-27 Climatic Humidity: IEC60068-2-78 WEEE: Directive 2002/96/EC RoHS: Directive 2002/95/EC Power Consumption 1.0 GHz, 512 MB mem: max. 27 W at 2m/s airflow 1.33 GHz, 1 GB mem: max. 27 W at 2m/s airflow 1.5 GHz, 2 GB mem: max. 39 W at 2m/s airflow 3 www.kontron.com AM4101 Technical Information General Dimensions: 181.5 mm x 73.5 mm MTBF: 223,861h acc. Bellcore Issue 6, Ground Benign, Controlled, 30°C Weight: 145 g (Mid-Size) 188 g (Full-Size) Software Support Netbootloader, configuration stored in EEPROM, Boot order defined via MMC Serial over Lan, Support for Linux, VxWorks Environmental Operating temp.: -5°C to +55°C (depending on system environment) Storage temp.: -55°C to +70°C Humidity: Operational: 5%-90% (non-condensing) Non-Operating: 5%-95% (non-condensing) Ordering Information Article Description AM4101-1.5D-2G AMC processor module, Freescale MPC8641D 1.5 GHz, 2 GB memory, 2 GB flash, full-size, AMC.1/AMC.2/AMC.4 AM4101M-1.5D-2G AMC processor module, Freescale MPC8641D 1.5 GHz, 2 GB memory, 2 GB flash, mid-size, AMC.1/AMC.2/AMC.4 LIN-BSP-AM4101 Linux BSP based on Freescale Linux package LIN-BSP-WR-AM4101-PNE2.0 WindRiver Linux BSP PNE 2.0 VXW-BSP-AM4101-V6.6 WindRiver VxWorks V6.6, supporting SMP AM4101 PLATFORMS CORPORATE OFFICES Europe, Middle East & Africa North America Asia Pacific Oskar-von-Miller-Str. 1 14118 Stowe Drive 17 Building,Block #1,ABP. 85386 Eching/Munich Poway, CA 92064-7147 188 Southern West 4th Ring Road Germany USA Beijing 100070, P.R.China Tel.: +49 (0)8165/ 77 777 Tel.: +1 888 294 4558 Tel.: + 86 10 63751188 Fax: +49 (0)8165/ 77 279 Fax: +1 858 677 0898 Fax: + 86 10 83682438 info@kontron.com info@us.kontron.com info@kontron.cn 4 www.kontron.com #AM4101# 01062010AK All data is for information purposes only and not guaranteed for legal purposes. Subject to change without notice. Information in this datasheet has been carefully checked and is believed to be accurate; however, no responsibilty is assumed for inaccurancies. All brand or product names are trademarks or registered trademarks of their respective owners.
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the AM4101 have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods