AM4020 - KONTRON - Elite.Parts

Description

Kontron AM4020 CPU Board - The AM4020 is a powerful single-width AdvancedMC processor module, designed around the new Intel Mobile Core i7 processor.

Part Number

AM4020

Price

Request Quote

Manufacturer

KONTRON

Lead Time

Request Quote

Category

PRODUCTS - A

Specifications

AMC

PICMG AMC.0: Advanced Mezzanine Card Specification R2.0, PICMG AMC.1: PCI Express and Advanced Switching R1.0, PICMG AMC.2: Gigabit Ethernet R1.0, PICMG AMC.3: Storage Interfaces R1.0

ATCA

12 V payload power, 3.3 V management power

Board Weight

Mid-size: approx. 240 grams (with heat sink)

EN55022, EN55024, EN61000-6-2/-6-3, EN300386, EN60950-1

Climatic Humidity

IEC60068-2-78

Dimensions

Dimensions without retention screws on front panel:Mid-size: 181.5 mm x 73.5 mm x 18.96 mm

EEPROM

Serial EEPROM (24LC64) 64 kbit

FCLKA

Bidirectional PCI Express clock configuration

Flash (BIOS)

Two redundant 8 MB SPI Flash chips (2 x 8 MB) for uEFI BIOS controlled by the MMC

Form Factor

Single mid-size or full-size AMC module (full-size on request)

Front Panel DisplayPort

One DisplayPort on standard 20-pin DisplayPort connector

Humidity

Operational: 5%-90% (non-condensing), Non-Operating: 5%-95% (non-condensing)

I/O Extension

The I/O extension holds the following interfaces: SATA, USB, LPC interface and some power and control signals, battery input

IPMI

IPMI Intelligent Platform Management Interface Spec. V2.0, IPMI - Platform Management FRU Information Definition V1.0

LEDs

Three Module Management LEDs, Four User-Specific LEDs, Ethernet LEDs

MicroTCA

PICMG MTCA.0 Micro Telecommunications Comp. Architecture R1.0a

MMC

NXP LPC2368 controller with on-chip 512 kB Flash and 56 kB RAM

MTBF

209269 h Bellcore Issue 6 / 225907 h MIL-HDBK-217 FN2 Ground Benign 30°

NAND Flash

Up to 32 GB SLC NAND Flash on a dedicated SATA NAND Flash module

Onboard Gigabit Ethernet

One Intel 82580EB Quad Gigabit Ethernet PCI Express bus controller, Two interfaces routed to front I/O connectors, Two interfaces routed to the AMC connector

PCI Express

Two x4 or eight x1 PCI Express interfaces on AMC ports 4-11 (Fat Pipes Region)

Platform Controller Hub

Mobile Intel QM57 Express Chipset: Two x4 or eight x1 PCI Express 2.0 ports operating at 2.5 GT/s, SATA host controller with six ports, 3 Gbit/s data transfer rate and RAID 0/1/5/10 support, USB 2.0 host interface with up to 14 USB ports available (only one USB 2.0 port is used on the AM4020)

Power Consumption

i7-620LE (LV) 2.0 GHz: max 30 W (graphics idle), max 38 W (with graphics load), i7-610E (SV) 2.53 GHz: max 36 W (graphics idle), max 49 W (with graphics load)

Power Supply

12 V payload power, 3.3 V management power

Processor

Intel Core i7
The AM4020 supports the following microprocessors: Intel Core i7-610E (SV) processor with ECC, 2.53 GHz, 4 MB L3 cache, Intel Core i7-620LE (LV) processor with ECC, 2.0 GHz, 4 MB L3 cache; Cache Structure: 64 kB L1 cache for each core, 32 kB instruction cache, 32 kB data cache, 256 kB L2 shared instruction/data cache for each core, 4 MB L3 shared instruction/data cache shared between both cores; Further processor features: Two execution cores, Intel Hyper-Threading Technology (Intel HT Technology), Intel 64 Architecture, Intel Turbo Boost Technology, Intel Intelligent Power Sharing (IPS)

RoHS

Directive 2002/95/EC

Serial ATA

Two SATA ports (Common Options Region ports 2-3), Two SATA ports (Extended Options Region ports 12-13)

Serial Port

COM1 (LVTTL) (Extended Options Region port 15)
One RS232 UART interface on 10-pin mini connector

Software

BIOS:AMI uEFI BIOS, IPMI:MMC (Module Management Controller) implementation compliant to PICMG, AMC.0, Kontron own IP, Linux:Generic BSP to be used with various Linux derivates;, Verified for RedHat 5.3 and SUSE 11.2 (kernel 2.6.2x) or later, Windows:Windows XP SP3 / XPembedded, Windows 7 (32/64 bit), Windows 2008 Server R2 for AM4020-versions with DisplayPort interface or later, WindRiver Linux:PNE 3.x or later, VxWorks:VxWorks BSP 6.8 or later

System Interconnection Debug Interface

One Debug port (Extended Options Region port 14)

System Interconnection DisplayPort

One DisplayPort on request (Extended Options Region ports 17-20)

System Interconnection Gigabit Ethernet

Two 1000BASE-BX (SerDes) (Common Options Region ports 0-1)

System Memory

Dual channel DDR3 memory, up to 8 GB DDR3 SDRAM memory with ECC, running at 1066 MHz

Temperature range

-5°C to +55°C (standard, depending on processor version and airflow in the system), -40°C to +70°C (extended, depending on processor version and airflow in the system), -40°C to +70°C (storage), passive module heat sink, forced system airflow

TPM

Infineon SLB9635TT TPM 1.2 controller (on request)

UART

EXAR XR16L580IL single UART, 16550 compatible

USB

One USB 2.0 port on 5-pin, type A Mini-USB connector

VGA

Built-in Intel 3D Graphics accelerator for enhanced graphics performance: Supports resolutions up to 2560 x 1600 pixels @ 60 Hz, DisplayPort hot plug support, Dynamic Video Memory Technology; If the AM4020 is populated with a COM port on the front panel, the VGA controller is disabled.

Vibration/Shock

IEC60068-2-6 / IEC60068-2-27

Watchdog

FPGA-based, software-configurable, two-stage Watchdog w. programmable timeout ranging from 125 ms - 256 s in 12 steps

WEEE

Directive 2002/96/EC

Features

AMC Processor Module, Single-module, Mid-size (Full-size on request)
Comprehensive I/O capabilities
Extended temperature according MicroTCA.1
Graphics interface
Intel Core i7 up to 2.53 GHz
PICMG AMC.0/.1/.2/.3 compliance
Superb monitoring features
Up to 32 GByte SATA NAND Flash memory module
Up to 8 GByte SDRAM memory (soldered) with ECC running at 1066 MHz

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products