������ � � ����� �������� ���������� ����������������� ���������� Ultra Performance Up to 2.0 GHz Intel� Pentium� M processor 760 Ultra Capacity Up to 4 GB memory DDR2 400 MHz Ultra Flexibility Flexible Gigabit and PCI Express fabric interface If it’s Embedded, it’s Kontron. First class performance AMC module Ultra Capacity evaluation kit includes s/w support and all Kontron’s AdvancedMC The board includes a dedicated memory accessories needed to run the AM4002. processor module AM4002 module for up to 4 GByte registered Double provides outstanding Data Rate (DDR2) memory with Error AMC everywhere performance in conjunction Checking and Correcting (ECC) running at A comprehensive range of ’AMC everywhere’ with comprehensive AMC 400 MHz. An onboard soldered Flash up to ATCA boards, such as ATCA carrier boards, interconnect capabilities 2 GByte ensures enough space for embedded CPU and hub boards are complementing application code. Kontron’s AMC product portfolio including designed according to the the AM4002 module. PICMG specifications AMC.0, Ultra Flexibility Optimized for high-performance, packet- AMC.1, AMC.2, AMC.3. Supporting the PICMG sub-specifications based telecom systems, the AM4002 is AMC.1/.2/.3 the AM4002 ensures a targeted towards, but not limited to telecom Ultra Performance comprehensive set of interconnecting applications such as radio network The AM4002 is a highly integrated CPU capabilities to the AMC Carrier. controllers, storage control, routing and board implemented as a single, Full- or Mid- A x4 PCI Express lane according to AMC.1 switching solutions in ATCA systems. size processor Advanced Mezzanine Card guarantees high throughput for I/O intensive Beyond the usage in ATCA systems the (AMC) module. applications. The dual Gigabit Ethernet AM4002 complies to the newly specified The design is based on the low-power, high- controller realizing the AMC.2 interconnect �TCA standard dedicated for cost optimized � �� � performance Intel Celeron M or Pentium utilizes a x4 lane PCI Express interface to communication applications. M processors combined with the high- the E7320 chipset ensuring maximum packet performance E7320 and 6300ESB server- performance. Reliability class chipsets. Two SATA ports compliant to AMC.3 allow The careful design and selection of high � � The board supports Intel Celeron M and flexible usage models of the AM4002 temperature resistant components together � Pentium M processor versions in 90 nm depending on the application requirements. with the elaborated heat sink construction technology and 479 �FCBGA package with ensures a high product availability. This, frequencies ranging from 1.0 GHz up to Professional Support along with a high level of scalability, 2.0 GHz providing front side bus speeds of For test purposes and first evaluation steps reliability, and stability, makes this state- 400 MHz and 533 MHz. Kontron offers a complete evaluation kit of-the-art product a perfect core technology for the AM4002 the AM-EVAL1. The for long-life embedded applications. Mid-size Full-size front panel front panel ������ Specification MMC Module Management Controller System Processor Microcontroller with 4 kB RAM: � � � Intel Celeron M and Pentium M Processor (90 nm), 479-pin �FCBGA package, - Two redundant 128 kB flash chips (one internal, one external) 2x 32 KB L1 cache and 1/2 MB L2 cache, 400 or 533 MHz processor system bus. - Communication capabilities: For Mid-size AM4002: Keyboard Controller Style (KCS) interface to the onboard processor, 1) - Celeron M 373 UL, 1.0 GHz ultra low voltage, 1 MB L2 cache, FSB 400 MHz local Intelligent Platform Management Bus (IPMB-L) to the carrier - Pentium M 738 LV, 1.4 GHz (low voltage), 2 MB L2 cache, FSB 400 MHz serial debug interface for test purposes - Pentium M 745, 1.8 GHz, 2 MB L2 cache, FSB 400 MHz - Comprehensive MCC monitor/control support: For Full-size AM4002 with extended heat sink: Processor and chipset supervision such as: 1) - Pentium M 760, 2.0 GHz, 2 MB L2 cache, FSB 533 MHz Reset Board The processor is passive cooled with a fanless heatsink. Forced air cooling at Flash fail-over mechanism a specific flow rate is required. Monitor BIOS POST code 1) available on project request only Onboard Power Supply Supervision such as: AMC payload power Memory AMC management power System memory: Up to 2 GByte registered DDR2 400 MHz memory with ECC Various onboard supply voltages on dedicated memory module (4 GByte when 1 Gbit memory Temperature control for processor, board, chipset, GbE controller chips available) Flash: Soldered, up to 2 GByte via onboard IDE Flash controller Compliancy for application code Flash (BIOS): Two redundant 1 MB Firmware hubs (FWH) - PICMG AMC.0: Advanced Mezzanine Card Specification R2.0 EPROM: Serial EEPROM (24LC64) 64 kbit for CMOS data storing (no - PICMG AMC.1: PCI Express and Advanced Switching R1.0 battery backup) - PICMG AMC.2: Gigabit Ethernet R1.x - PICMG AMC.3: Storage Interfaces R1.x - IPMI Intelligent Platform Management Interface Specification, V1.5 Onboard Controller Memory Controller Hub: Intel E7320 chipset - EMC Directive 89/336/EEC, EN 55022, EN 55024 (Europe) Two x4 PCI Express ports, DDR2 memory controller with - EN 300 386 RASUM features such as ECC, retry on uncorrectable error, integrated memory scrub engine, memory sparing function Designed to meet: I/O Controller Hub: Intel 6300ESB chipset - FCC 47 CFR Part 15, Subpart B (USA) SATA 150, PATA 100, USB 2.0, UART, RTC, Interrupt Controller, - CISPR22 Timer - VCCI (Voluntary Japan Electromagnetic Compatibility requirement) Gigabit Ethernet: Intel 82571EB dual Gigabit Ethernet PCI Express bus controller - UL 60950, 3rd edition (US and Canada) Watchdog: FPGA based Software configurable two-stage Watchdog with - EN 60950-1 (Europe) programmable timeout ranging from 125 msec to 256 sec in - LVD 73/23/EEC (Europe) 12 steps. - Denan Law (Japan Safety) MMC: Microcontroller with dual 128 kB Flash and 4 kB RAM Power Consumption AMC System Interconnect 1.4 GHz, 1 GB mem: typ. 24 W, max. 28 W PCI Express: One x4 PCI Express interface 1.8 GHz, 2 GB mem: typ. 34 W, max. 40 W AMC fat pipes region port 4-7 (root complex) Gigabit Ethernet: Two Gigabit Ethernet 1000BASE-BX (SerDes) ports General AMC common options region port 0-1 Serial ATA: Two Serial ATA 150 ports Dimensions: 181.5 mm x 73.5 mm AMC common options region port 2-3 Single-width, full-height, extended full-height MTBF: 216,209 h acc. Bellcore Issue 6, Ground Benign, Controlled, 30�C Front Panel Interfaces Software Support USB interface: One USB 2.0 host port on 5-pin MiniUSB type A/B connector One COM port on 9-pin Dsub connector AMI BIOS, BIOS parameters saved in EEPROM, Boot order defined via MMC LEDs: Light pipe: Serial over Lan, Support for Linux CGL LED 0 (blue): hot swap LED 1 (red) Environmental LED 2 (green): general purpose or over temperature � � Operating temp.: -5 C to +55 C (depending on system environment) LED 3 (amber): general purpose or watchdog � � Storage temp.: -55 C to +85 C Four general purpose LEDs (debug LEDs for POST code) Humidity: Operational: 5%-90% (non-condensing) Alternatively used: Non-Operating: 5%-95% (non-condensing) LED 0/1: Ethernet port 0/1 link signal LED 2: SATA / Flash activity (application code) LED 3: MMC Debug LED AM-EVAL1 - Evaluation Kit for AM4002 - Two copper RJ45 Gigabit Ethernet connectors for 1000 Base- TX support - One standard PC PCI-Express x16 connector - Two SATA connectors - ATX power supply - 3.5" SATA hard disk - PCI-Express graphic board www.kontron.com ������ Ordering Information Product Description Processor AMC AM4002-1.4-1M-1F AMC processor module, Pentium M 1.4 GHz, 1 GB memory, 1 GB MB flash AM4002-1.4-2M-1F AMC processor module, Pentium M 1.4 GHz, 2 GB memory, 1 GB MB flash AM4002-1.8-2M-2F AMC processor module, Pentium M 1.8 GHz, 2 GB memory, 2 GB MB flash Software KIT-AM4002 User’s Manual, Tool-Kit LIN-BSP-AM4002 Linux Board Support Package Accessories CABLE-MINI-USB-TA Cable, MiniUSB-A-to-USB-A-Jack, 0.15m for AM4001 USB port to connect USB devices (included in AM-EVAL1) AM-EVAL1 AM4002 Evaluation Kit, including graphic card, HDD, cables, installed Linux s/w on HDD AM4002 Platforms Corporate Offices US/ Canada Europe, Middle East and Africa Asia Pacific Kontron Modular Computers GmbH 14118 Stowe Drive Oskar-von-Miller-Stra e 1 4F, No. 415, Ti-Ding Blvd. Sec. 2 Sudetenstr. 7 Poway, CA 92064-7147 85386 Eching/Munich Germany Nei Hu District, Taipei 114, Taiwan D-87600 Kaufbeuren Tel.: +1 (0)888-294-4558 Tel.: +49 (0)8165-770 Tel.: +886-2-29103532 Tel.: +49 (0) 8341 803 0 Fax: +1 (0)888-677-0898 Fax: +49 (0)8165-77219 Fax: +886-2-29103582 Fax: +49 (0) 8341 803 499 sales@us.kontron.com sales@kontron.com sales@kontron-asia.com sales@kontron.com Our worldwide sales representatives and partners can be found on our websites: www.kontron.com or www.kontron-emea.com www.kontron.com Publication Version 03/2007 Copyright � 2004 Kontron AG. All rights reserved. Printed in Germany. All data is for information purposes only and not guaranteed for legal purposes. Information has been carefully checked and is believed to be accurate; however, no responsibility is assumed for inaccurancies. Kontron and the Kontron logo are registered trademarks of Kontron AG. All other brand or product names are trademarks or registered trademarks or copyrights by their respective owners and are recognized. Specifications are subject to change without notice.