KONTRON 886LCD/ATXU-(GV)
Specifications
Additional I/O on Rear Panel
Com port1, RS232C, 16C550 compatible parallel port IEEE1284, With SPP, ECP or EPP mode, PS2 keyboard, PS2 mouse
Audio
AC97 compliant audio, On board Line In/Out, Mic
BIOS
AMI BIOS, 4Mbit Flash, Plug and Play device detection, support for USB boot
Board Type
Micro-ATX
Bus
3x PCI 2.2 master SLOT´s. 3V and 5V interface, AGP 1.5V only, Up to 4x data transfer and 4x fast write capability
Chipset
Intel 845GV + ICH4; Intel Extreme Graphics controller; 2x 12 bit DVO ports, can be used for one 24 bit digital display port; 2 channel Ultra ATA100 bus master controller; 3x USB 2.0 host controllers equal to 6x USB 2.0 ports; PCI 2.2 master + arbiter; AC-97 2.1 audio support
EMC/ESD
Compliance with EN55022 and EN55082-1, FCC part15 class B
Environmental compliance
RoHS and Lead-free production
Ethernet
On board RJ45 LAN 10/100 interface, Realtek 8100C, Wake on LAN
FDD Controller
One floppy drive port supports 2x 3.5“ 1.44 or 2.88 MByte
Form Factor
Micro-ATX form factor 24.38 x 24.38 cm (9.6“ x 9.6“)
IDE Controller
2x ATA100 and 2x SATA150 with RAID 0/1 support
Operating Temperature
0° to 60°C
Power Management
APM 1.2 and ACPI 1.0a compliant supply monitor, temperature monitor, fan monitor
Processor
Intel Pentium 4
Intel Pentium 4, Cleron D and Celeron from 1.6GHz to 3.2GHz, FSB: 400/533 MHz, Socket 478
Safety compliance
UL1950, EM60950, IEC950
System Memory
Up to 2 GByte PC2100 (DDR266) DDR-SDRAM, 2x 184 pin DIMM sockets 2.5V
Video
On board VGA port, resolution up to 2048x1536 (QXGA), 2x DVO ports for Flat Panel displays, QXGA and 24 bit colour, ADD cards connect to DVO ports, ADD DVI card available, ADD LVDS card available, AGP socket support only ADD cards (not support external AGP graphics card), Flat panel adaption and design in support
Features
- 10/100 RJ45 Realtek 8100C based LAN
- 2 x ATA100 and 2 x SATA150 with RAID 0/1 support
- 2x DDR266 SDRAM modules, 2 GByte maximum
- 3x PCI 2.2
- 6x USB 2.0, 2x COM ports
- AC-97 Audio
- CPU speed from 1.6 GHz to 3.2 GHz, FSB 400/533 MHz
- Digital Flat Panel Display support via ADD Cards (Option)
- Intel 845GV + ICH4 with Intel Extreme Graphics
- Intel Pentium 4 , Celeron D and Celeron Processors
- Long-term Supply ATX & ATXU Embedded Motherboard
Datasheet
KONTRON-886LCD-M-datasheet.pdf
192 KiB
Extracted Text
886LCD-M Family ® ® ® ® Intel Pentium M & Intel Celeron M Embedded mITX, Flex-ATX & ATX Motherboard with up to 3x GbE LAN, S-ATA 4x COM, LVDS ® ® ® ® Intel Pentium M & Intel Celeron M Processors Long-term availability ® ® Intel 855GME + Intel 6300ESB Embedded Chipset ® Intel Extreme Graphics 2 Controller with standard AGP/DVO interface Flat Panel Display Support, incl. dual independent display Up to 3x 10/100/1000 Mbps Ethernet AC97/DD5.1 Compliant Amplified Audio Output 2x S-ATA150, 2x ATA100 Different ATX form factor compatible Serial ATA SOFT RAID 0/1 If it`s Embedded, it`s Kontron. 886LCD-M Family Technical Data Processor Parallel Port Intel® Pentium® M and Intel® Celeron® M Processors (mPGA478) up to 2.1 Bi-directional Centronics w. ECP or EPP mode GHz Serial Port Prepared for mBGA479 4x RS232C NS16C550 serial ports with FIFO Chipset USB Intel® 855GME and Intel® 6300ESB Empedded Chipset 4x port USB 2.0 (2x internal and 2x external) Front Side Bus Ethernet 400 MHz Up to 3x 10/100/1000 Mbps Ethernet Controller, Realtek (option) BIOS Keyboard/Mouse AMI® Standard PS/2 mouse and keyboard (internal connection available) Power Management Sound ACPI 2.0 and APM 1.2 AC97/DD5.1 compliant with amplifier Bus Hardware Monitoring Up to 6x PCI connector (Support PCI Bus-master) Temperature, fan and voltages AGP/DVO Monitoring API/DMI AGP 4x connector for external graphic card and ADD DVO card Software interface to monitor hardware values including HDD S.M.A.R.T. SDRAM Battery Up to 2x 184-pin SDRAM up to 2 GByte of PC2700/DDR333 SDRAM (incl. ECC) On board Lithium battery and external battery input Graphics Power Supply Intel® Extreme Graphics 2 Controller with 2D/3D Graphics Engine ATX Dual Pipe for dual independent displays (incl. 2x LCD) Operating Temp. HW assisted DVD/MPEG2 Decoding 0 - 60°C* Resolution EMC/ESD compliance Up to: CRT 2048x1536, LVDS 1600x1200, DVI 2048x1536 Compliance with EN55022 and EN61000-4-2(ESD) Graphic Interfaces Safety compliance On board CRT, on board Dual Channel LVDS, UL609501-1: 2003, First edition 2nd LVDS, DVI via ADD-Cards (option) CSA C22.2 No.60950-1-03 First edition, April 1. 2003 HDD Environmental compliance 2x SerialATA150 and 2x ATA100 (2.54mm + 2.00mm) RoHS and Lead-free production Floppy Share use with Parallel Port connector (*) see manual for details Ordering Information 886LCD-M/mITX 886LCD-M/mITX 886LCD-M/mITX 886LCD-M/mITX (BGA) 886LCD-M/Flex 886LCD-M/Flex 886LCD-M/ATX Part.-No. 810187-4500 810182-4500 810191-4500 810196-4500 810184-4500 810180-4500 810183-4500 PCI 1x 1x 1x 1x 3x 3x 6x CF No Yes No Yes No No No LAN 1x 10/100 3x 10/100/1000 3x 10/100/1000 3x 10/100 3x 10/100 3x 10/100/1000 3x 10/100/1000 Memory 1x 1x 1x 1x 2x 2x 2x ADD-Cards for the 2nd Display ADD-DVI-I/CRT (Low profile) ADD-LVDS Part #820942 Part #820935 Corporate Offices Europe, Middle East & Africa North America Asia Pacific Kontron Technology A/S Kontron AG Kontron America Corporate Office Kontron Asia Inc. Dr. Neergaards Vej 5D Oskar-von-Miller-Str. 1 14118 Stowe Drive 4F, No. 415, Ti-Ding Blvd. 2970 Hørsholm 85386 Eching/Munich Poway, CA 92064-7147 Sec.2, NeiHu District Denmark Germany USA Taipei Taiwan 114 Tel.: +49 (0)8165/ 77 777 Tel.: +1 888 294 4558 Tel.: +886-2-2799-2789 Tel.: +45 4576 1016 Fax: +49 (0)8165/ 77 219 Fax: +1 858 677 0898 Fax: +886-2-2799-7399 Fax: +45 4576 1017 sales@kontron.com sales@us.kontron.com sales@kontron.com.tw motherboard@kontron.com www.kontron.com #886LCD-M Family#-080108PDL All data is for information purposes only and not guaranteed for legal purposes. Subject to change without notice. Information in this datasheet has been carefully checked and is believed to be accurate; however, no responsibilty is ® ® assumed for inaccurancies. All brand or product names are trademarks or registered trademarks of their respective owners. DIMM-PC and JUMPtec are registered trademarks of Kontron Embedded Modules GmbH, Germany.
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the 886LCD/ATXU-(GV) have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods