Manufacturers
KONTRON 38001-0000-10-1
Description
Kontron 38001-0000-10-1 ETXexpress-PM 373 | ETXexpress-PM CPU Module | Celeron M 373 CPU (1.0GHz) | Soldered (BGA)
Part Number
38001-0000-10-1
Price
Request Quote
Manufacturer
KONTRON
Lead Time
Request Quote
Category
PRODUCTS - 3
Specifications
95 x 125 mm
System
Chipset Integrated
4 PCI Express x1 (3 PCI Express x1 for GbE version), 1 PEG x16
Environment
Temperature: operation: 0° to 60°C, storage: -10° to 85°C
Expansion BUS
10/100 MBit Ethernet (or Gigabit Ethernet)
Form Factor / Pin-out Type
Fully COM Express Type 2 compliant
Hard Disk
2 x Serial ATA, 1 x Parallel ATA 100
Humidity: operation: 10% to 90%, storage: 5% to 95%
System
LVDS Panel Support
Single and Dual Channel LVDS 18/24 bit, Dual SDVO
Max Data Transfer Rate
Up to 2GB (400/533) DDR2 SODIMM
Other Features
E²PROM BIOS Setup, LAN Boot, JRC support, I²C Bus, RTC, Watchdog, JIDA Support, IrDA enhanced
PCI 2.3, 32 bit / 33 MHz PCI bus
System
Power Requirement
typ. Idle 13,3W Pentium LV738
Processor
Intel Celeron M ULV
Intel Pentium M and Intel Celeron M Processor, socket or soldered
QSXGA 2048x1536 32 Bit
System
RTC
XGA 1024x786 32 Bit, SXGA 1280x1024 32 Bit,
Serial
Intel High Definition Audio / AC97
TV out / HDTV Resolution
TV out on seperate set of pins (component video or composite video)
USB
8x USB 2.0 Ports for external peripherals
VRAM
Integrated with Intel Graphics Media Accelerator (GMA 900) or expand via 1 PEG x16
Features
- Best performance with latest interface technologies
- Equipped with the upcoming primary datapath PCI Express
- Intel Extreme Graphics and PCI Express Graphic
- SerialATA for highspeed drives
- USB 2.0 for fast peripherals
Datasheet
Extracted Text
ETXexpress®-PM Perform beyond limits Best performance with latest interface technologies Equipped with the upcoming primary datapath PCI Express Intel® Extreme Graphics and PCI Express Graphic USB 2.0 for fast peripherals SerialATA for highspeed drives If it‘s Embedded, it‘s Kontron. ETXexpress®-PM Product Overview ETXexpress® is the Module concept of the new the ETXexpress®-PM has both Intel® Extreme Graphics open Standard COM Express® (by PICMG®). The 2 and PCI Express graphics 1x16. Fast communications ® new ETXexpress®-PM module is based on the Intel are possible courtesy of the 10/100Fast-T Ethernet port ® ® ® Pentium M and Intel Celeron M processors as well as that will be upgraded to be Gigabit ready in future the Intel® 915GM chipset. PCI Express is the primary COM Express®. 8x USB 2.0 provides fast and sufficient data path for upcoming x86 based systems. Non PCI interfaces for external peripherals. ETXexpress® COMs Express components such as PCI plug-in cards can modules also will provide the following interfaces that still be supported with the PCI 2.1 32 Bit Interface are always located in the same physical position on each as ETXexpress® COMs will continue supporting the board, thus guaranteering scalability between modules: PCI bus for legacy applications. The ETXexpress®-PM PCI-express, PCI32, USB, serial ATA, parallel ATA, will support 4 PCI Express x1 and PCI Express cards LVDS Multi Media ports as well as an ACPI (Advanced as well as established hardware solutions based on Configuration and Power Interface) for optimized power current busses such as 32 bit PCI. For applications management. Six mounting holes on the board provide that require advanced real-time video capabilities, secure mounting to allow the module increased shock and vibration resistance. Technical Information Resolutions CRT and LCD Processor ® ® ® ® XGA 1024x786 32 Bit, SXGA 1280x1024 32 Bit, Intel Pentium M and Intel Celeron M Processor, socket or soldered UXGA 1600x1200 32 Bit, Memory QSXGA 2048x1536 32 Bit Up to 2GB (400/533) DDR2 SODIMM LCD Panel Support Hard Disk Single and Dual Channel LVDS 18/24 bit, Dual SDVO 2 x Serial ATA, 1 x Parallel ATA 100 TV out USB TV out on seperate set of pins (component video or composite video) 8x USB 2.0 Ports for external peripherals Other Features PCI Express E²PROM BIOS Setup, LAN Boot, JRC support, I²C Bus, RTC, Watchdog, 4 PCI Express x1 (3 PCI Express x1 for GbE version), 1 PEG x16 JIDA Support, IrDA enhanced PCI 32 Power Consumption PCI 2.3, 32 bit / 33 MHz PCI bus typ. Idle 13,3W Pentium® LV738 Ethernet Form Factor / Pin-out Type 10/100 MBit Ethernet (or Gigabit Ethernet) Fully COM Express™ Type 2 compliant Sound 95 x 125 mm ® Intel High Definition Audio / AC97 Temperature Video Controller operation: 0° to 60°C, storage: -10° to 85°C ® Integrated with Intel Graphics Media Accelerator (GMA 900) Humidity or expand via 1 PEG x16 operation: 10% to 90%, storage: 5% to 95% (*) Ask about extended temperature ranges Ordering Information Article Part.-No. Description ® ® ETXexpress-PM370 socket 38001-0000-15-0 With Celeron M 370 processor (1.5 GHz), socket, 1MB L2 ® ® ETXexpress-PM745 socket 38001-0000-18-0 With Intel Pentium M 745 processor (1.8 GHz), socket, 2MB L2 ® ® ETXexpress-PM760 socket 38001-0000-20-0 With Intel Pentium M 760 processor (2.0 GHz, 533 FSB), socket, 2MB L2 ® ® ETXexpress-PM373 soldered 38001-0000-10-1 With Intel Celeron M ULV 373 processor (1.0 GHz), soldered, 512KB L2 ® ® ETXexpress-PM738 soldered 38001-0000-14-2 With Intel Pentium M LV 738 processor (1.4 GHz), soldered, 2MB L2 ® ® ETXexpress-PM373 GbE 38002-0000-10-1 With Intel Celeron M ULV 373 processor (1.0 GHz), soldered, GbE LAN, 512KB L2 ® ® ETXexpress-PM745 GbE 38002-0000-18-0 With Intel Celeron M ULV 745 processor (1.8 GHz), socket, GbE LAN, 2MB L2 ETXexpress Evaluation Board 38100-0000-00-0 Evaluation Baseboard for ETXexpress modules HSP ETXexpress-PM soldered 38001-0000-99-0 Heatspreader ETXexpress-PM, soldered, threaded stand off HSP ETXexpress-PM socket 38001-0000-99-2 Heatspreader ETXexpress-PM, socket, threaded stand off DDR2-SODIMM-1GB 97011-1024-00-0 DDR2 SODIMM memory module with 1GB Corporate Offices Europe, Middle East & Africa North America Asia Pacific Kontron Embedded Modules Oskar-von-Miller-Str. 1 14118 Stowe Drive 17 Building,Block #1,ABP. Brunnwiesenstr. 16 85386 Eching/Munich Poway, CA 92064-7147 188 Southern West 4th Ring Road 94469 Deggendorf Germany USA Beijing 100070,P.R.China Germany Tel.: +49 (0)8165/ 77 777 Tel.: +1 888 294 4558 Tel.: + 86 10 63751188 Tel.: +49 (0)991/ 370 24-100 Fax: +49 (0)8165/ 77 219 Fax: +1 858 677 0898 Fax: + 86 10 83682438 Fax: +49 (0)991/ 370 24-333 sales@kontron.com sales@us.kontron.com kcn@kontron.cn sales@kontron.com www.kontron.com/ETXexpress #ETXexpress-PM#09072008PDL All data is for information purposes only and not guaranteed for legal purposes. Subject to change without notice. Information in this datasheet has been carefully checked and is believed to be accurate; however, no responsibilty is assumed for ® ® inaccurancies. All brand or product names are trademarks or registered trademarks of their respective owners. DIMM-PC and JUMPtec are registered trademarks of Kontron Embedded Modules GmbH, Germany.
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the 38001-0000-10-1 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Kontron 36001-0000-06-4 CPU Board. Intel Celeron M processor ULV 600 MHz 512KB L2 / 82852GME
Kontron 36001-0000-08-3 CPU Board. Intel Processor 800 MHz 0KB L2 / 82855GME
Kontron 36001-0000-10-1 CPU Board. Intel Celeron M processor 373 ULV (1.0 GHz), 512KB L2 / 82855GME
Kontron 36001-0000-14-2 CPU Board. Intel Pentium M processor 738 LV (1.4 GHz), 2MB L2 / 82855GME
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods