Q U A D L E I I T F I Y CP320 HIGH- PERFORMANCE CPUs PowerPC Performance SINGLE-BOARD COMPUTERS for CompactPCI Fulfilling critical requirements in harsh environment � Integrated PowerPC MPC8240 with internal MPC603e core � 64 bit/33 MHz CompactPCI bus � PCI Expansion Connector � Up to 128 MB SDRAM/100 MHz � Up to 8 MB Flash � Two DIP sockets for memory extension � Fast Ethernet & 2 Serial Ports � Extended temperature version � Rugged 3U/4HP design � Universal Boot Loader CP320 – the PowerPC alternative for CompactPCI – Plug and Play – Rugged design DIN ISO 9001 Reg. No. 0548 - 02 T S R Y E S C T E M Product Overview HIGH- PERFORMANCE CP320 CPUs SINGLE-BOARD COMPUTERS PEP’s CompactPCI processor board with FPU based on the 32 bit PowerPC 603e core MPC8240 is designed for mission critical applications. CPU, Memory and DMA Anticipating the CP320’s use in data critical applications, the memory data path contains a selectable in-line ECC controller which can provide SDRAM single bit error correct or double bit error detect at 100 MHz synchronous access of the direct soldered SDRAM up to 128 MB. For boot code and romable RTOS 8 MB of direct soldered Flash is provided. For mass data trans- mission a dual channel DMA con- troller is provided. Two memory expansion sockets allow the addition of Flash (single chip or Disk On Chip) and/or SRAM (chip or Parameter storage DRAM before booting the OS . For NVSRAM) in a very flexible way. Two EEPROM’s 64 Kbit, one for facto- performance reasons the OS is always PCI Expansion ry settings and one for user setting as started from the fast SDRAM. A 100 pin PCI expansion connector well as a rotary coding switch with 16 that can be used to add further func- binary values helps the user to identi- tionality to the CP320 without occu- fy the CP320 individually. Front-Panel pying CPCI slots. One or two CP320- IO modules can be plugged together Support CP320 with the CP320 (e.g. two PMC slots The MPC8240 supports processor can be added) resulting in a total control and visibility through the package of either 8 HP or 12 HP. JTAG/COP interface that is accessible as a pin row connector on CP320. Uti- CompactPCI interface lizing third party tools, the developer The CP320 supports all necessary sig- can access and control the micro- nals to allow other peripheral boards processor.The ECC data path has a to be removed or added with power mechanism to manually inject errors on.The individual clocks for each slot into memory for use with mainte- and access to or interrupt on the back- nance and diagnostic utilities. Further plane ENUM# signal are compliant to a watch point and capture register on the PICMG 2.1 Hot-Swap specification. the internal bus as well as a set of address attributes on the external LAN memory and PCI buses aid in debug- The i82559 10/100 Mbps Fast Ether- ging analysis. net controller is ideal for power and space constrained environments. Universal Boot Loader The CP320 employs an operating sys- Serial ports tem independent boot loader that Two software configurable serial ports enables the loading of any OS.This (RS232 and RS485 opto isolated) are boot loader makes an update of the realized with the 16C2550 UART and Flash contents and accomplishes an supports baud rates up to 1.5 Mbps. automatic download from Flash to Specifications CP320 Processor Software Support Integrated PowerPC microprocessor A Universal Boot Loader supports the start of any oper- Motorola MPC8240 ating system like WindRiver V�Works. L1 cache 2 � 16 kB data/instruction cache; CompactPCI Bus Interface Internal processor core MPC603e Core Frequency 250 MHz (350 MHz planned) PICMG 2.0 Rev. 3.0 compliant 6.6 SPECint95/250 MHz 3.3 V/5.0 V compatible signaling/universal 5.5 SPECfp95/250 MHz 64-bit/33 MHz system master interface 375 Dhrystone (2.1) MIPS/250 MHz Rear I/O version 32-bit/33 MHz PCI bridge and PCI arbiter J2 rear I/O: 2� serial ports, Ethernet, LEDs Two channel controller DMA with chaining Miscellaneous Functions Programmable IRQ controller Multiple timers and counters Coding switch (read back binary code from 0 to 15) Max. case temperature +105 °C Timers: Four 32-bit timers, one 16-bit timer, one watchdog timer (0,5/1/1,5/2 sec) Memory RTC Time keeper, counter for s/h/m/d/date/ SDRAM up to 128 MB direct soldered, 64 bit/100 MHz month/years and century; backup via GoldCap (5 days) with ECC protection (8 bit parity) or optional via replaceable battery (20 years, if RTC Flash up to 8 MB direct soldered (Boot Device and only) Program Storage) Debug Port JTAG/BDM; 16 Pin row connector Two 32 pin DIP sockets (one optional 36 pin) for Common memory expansion: � Flash DiskOnChip (up to 96 MB) Temp. Ranges: 0 °C to +60 °C (standard) � Flash chip (512 kB) –40 °C to +85 °C (extended) � NV-SRAM (512 kB)/Cell Storage Life 10 years; 2 MB –55 °C to +125 °C (storage) chip with 36 pin socket extension (Cell Storage Life Relative Humidity: 0% to 95% (non-condensing) 5 years) MTBF according to MIL-HDBK 217F � SRAM chip (512 kB) with battery backup option CP 320 170,400 h (GoldCap 5 days or replaceable battery up to CP 320-IO1 251,000 h 5 years) Safety: EN 60950, IEC 950, UL 1950 � Two serial EEPROM’s (8�8 kByte) EMI/EMC: EN 50081-1/EN 50082-2 � One EEPROM for board default settings Vibration: IEC 68-2-6, 10-300 Hz, 5 g � One EEPROM for user settings Cont. Shock: IEC 68-2-29, 11 ms, 15 g Single Shock: IEC 68-2-27, 9 ms, 30 g Front I/O Altitude: 50,000 ft. (15,240 m) � Fast Ethernet Channel 10 Base-T/100 Base-TX; Warrenty: 2 years RJ-45; LAN Status LED’s (Activity, Link, Speed) Power Consumption: 7.5 W* /typ. � Two serial ports +5 V 4.5 W* /typ. 16550 compatible Dual UART; RJ-45 +3.3 V 2.8 W* /typ. – RS232 +12 V 0 W* nd – RS485 optical isolated (or 2 RS232) –12 V 0 W* � Two push buttons RESET, ABORT (NMI) 3 Board * Without PCI Expansion Module Status LED’s (watchdog active, 2� general purpose) and at 250 MHz, 64 MB SDRAM, 8 MB Flash PCI Expansion Interface Dimensions: 100 mm�160 mm (3U card size) 32 bit/33 MHz; 5V Signaling; Front Panel Hight: 128.5 mm; Up to two expansion modules are stackable. Width: 20 mm (0.8 inch)/4 HP 8 HP/12 HP version with one/two PMC slots or Weight:: 200 g two/four PC*MIP slots.This port can also be used to add customized functionality. Ordering Information CP320 Product Description Order No. CP320 1) 250 MHz MPC8240, 128 MB SDRAM with ECC, 8 MB Flash, Ethernet, two RS232, 21671 CP320 1) 250 MHz MPC8240, 64 MB SDRAM with ECC, 8 MB Flash, Ethernet, two RS232, 21286 CP320-E1 1) Same as above but extended temperature range E1 (–25 °C .. +75 °C) 21862 CP320-E2 1) Same as above but extended temperature range E2 (–40 °C .. +85 °C) 21863 CP320-IO1 2) PCI expansion I/O; one PMC slot (adds another 4 HP in width) 21608 FLD-16 3) 16 MByte FLASH-Disk 19643 FLD-24 3) 24 MByte FLASH-Disk 19194 FLD-32 3) 32 MByte FLASH-Disk 19644 29F040-120 Flash device, 512 KB 12978 SR512K8-70 SRAM device, 512 KB 14158 NVSRAM-512 4) 512 kByte non volatile SRAM; 32 pin DIP 20656 Cable-RS232 3 meter RS232 Serial Interface cable with RJ45 to 25Pin D-Sub (male) for terminal connection 10890 VxW-BSP-CP320 5) VxWorks Board Support Package for development with Tornado2 21288 KIT-CP320 User’s manual documentation in PDF format on 3.5”floppy disk 21287 Note: 1) Second RS232 instead of RS485 on request Frontpanel interfaces routed to the rear to J2 connector on request Rear I/O module on request Battery on socket; min. 5 years life time (replacement of GoldCap) on request All versions also in extended temperature range on request Rear I/O module on request 2) PC*MIP or custom I/O modules on request 3) FLASH-Disks up to 96 MByte are also available on request (low profile package) 4) Smaller NVSRAM capacity on request 2 MB, 36 pin NVSRASM on request 5) Further Operating System support on request Power On-Code Module on request � USA � GERMANY � FRANCE � UK � SWEDEN � BENELUX � POLAND � ITALY � SPAIN � NORWAY � Visit our home page at: http://www.pep.com � DENMARK � FINLAND � SWITZERLAND � CZECHIEN � HUNGARY � CIS � CHINA � JAPAN � KOREA Benelux Germany Korea Sweden PEP Modular Computers Benelux PEP Modular Computers GmbH PEP DASAN Systems Co., Ltd. PEP Modular Computers AB Koning-Albert-Laan 46 Sudetenstr. 7 6F KOSMO Tower Hörnåckersvägen 8 B-1780 WEMMEL 87600 Kaufbeuren 1002 Daechi-dong, Kangnam-ku S-183 65 TÄBY Tel.: ++32 (0)2 456 06 40 Tel.: ++49 (0) 8341 803 0 Seoul, Korea (Zip135-280) Tel.: ++46 (0) 8 446 34 60 Fax: ++32 (0)2 461 00 31 Fax: ++49 (0) 8341 803 499 Tel.: ++82 2 34 84 - 65 50 Fax: ++46 (0) 8 732 63 10 Fax: ++82 2 34 84 - 65 51 Postbus 9712 ROTEC GmbH USA NL-4801 LV BREDA Gutenbergstr. 15 Poland PEP Modular Computers Inc. Tel.: ++31 (0)76 5217 957 76437 Rastatt PEP Modular Computers sp. z o.o 750 Holiday Drive, Building 9 Fax: ++31 (0)76 5217 959 Tel.: ++49 (0) 7222 10 08 0 Al. Jerozolimskie 144 Pittsburgh, PA 15220 Fax: ++49 (0) 7222 10 08 10 02-305 WARSZAWA Tel.: ++1 412 921 3322 France Tel.: ++48 (0) 22-823 55 73 Fax: ++1 412 921 3356 EURO PEP Paris Great Britain Fax: ++48 (0) 22-823 55 73 Toll free: 800/228-1737 PEP Modular Computers GmbH Les Bureaux du Manoir PEP Modular Computers (UK) Ltd. infoline 0-801-396 634 18 Chemin du Fond du Chêne Riverside Business Centre Sudetenstr. 7 F-78 620 L’ETANG LA VILLE Brighton Road D-87600 KAUFBEUREN Tel.: ++33 (0) 1 39 16 10 30 Shoreham-By-Sea Fax: ++33 (0) 1 39 16 10 25 West Sussex BN43 6RE Tel.: ++49 (0) 8341 803 0 Tel.: ++44 (0) 1273 441188 Fax: ++44 (0) 1273 441199 Fax: ++49 (0) 8341 803 499 © PEP 2000: ™ All trademarks are recognised, Subject to change without notice Publication Number 21965 DS-0500