Motherboard with 80386SX CPU, 2 MByte-DRAM DIMM-PC/386-B keyboard controller, real time clock and 1,9 MByte BIOS compatible ţ ash disk Motherboard with 80386SX CPU, 4 MByte-DRAM DIMM-PC/386-I keyboard controller, real time clock and 8 MByte IDE ţ ash disk 68 mm (2.7“) Technical Data Licensed DR-DOS already pre-installed! CPU 386SX Adjustable CPU Speed 10/33/40 MHz Memory, onboard 2/4 MByte DIMM-PC/386-B: CPU 386SX - 10/33/40 MHz ţ ash disk with integrated ţ ash Ţ ling system READY FOR 2 MByte DIMM-PC/386-I: CPU 386SX - 10/33 MHz 8 MByte IDE compatible ţ ash disk Two serial ports, DP144-interface COM1 and COM2 with TTL signals Picture in original size! Floppy interface IDE harddisk interface Real time clock One parallel port, LPT1 with EPP support Description Keyboard controller The DIMM-PC/386 integrates the complete functionality responds to the pinout of the ISA bus connector. EEPROM for CMOS-SETUP of an 80386SX motherboard with CPU, System-BIOS, Therefore the two PC systems with different form 5V only power supply 2 MByte to 4 MByte DRAM, keyboard-controller and factors are electrically compatible. Only the Latchable Programmable /CS output real time clock. The DIMM-PC/386 is available in two adress-bus LA(17..23) and the signals of DMA 1,3,4 ® versions -B and -I. The B-version has a silicon disk and 8 are not connected to the DIMM-PC bus. The Dimensions: with ţ ash Ţ le system integrated in the BIOS and can 80386SX-solution is designed with a highly integrated 68x40 mm (2.7x1.6”) ® only be used with DOS. The I-version has 8 MByte IDE CPU-chip from Acer Labs Inc. The DIMM-PC modules Temperature: compatible ţ ash-harddisk onboard. Over the connector, are especially equipped for embedded applications with operation: 0° to 65°C storage: 10° to 85°C integrated on the board, the DIMM-PC/386 offers industrial BIOS extensions like setup-date in EEPROM additional peripheral functions like COM1, COM2, LPT1, as well as a remote control-function, allowing the Max. humidity: ţ oppy interface and IDE hard disk interface. The system operation with an external PC as terminal (software operation: 10% to 90% storage: 5% to 95% runs with a default CPU clock speed of 33 MHz. JRC-1). (do not allow condensing) ® The pinout of the DIMM-PC bus connector cor- Ordering Information Article Part.-No. Description DIMM-PC/386-B 08003-0202-33-0 with 2 MByte DRAM and 1,9 MByte BIOS ţ ash disk DIMM-PC/386-I 08004-0408-33-0 with 4 MByte DRAM and 8 MByte integrated IDE ţ ash disk Accessories Article Part.-No. Description ® DIMM-PC/KIT2 08005-0000-00-3 Starter Kit for DIMM-PC with PC/104 interface DIMM-PC/VGA1 and with cable for FDD/2.54 ® IDE/2.54 and manuals (without DIMM-PC CPU) DIMM-PC/VGA1 08006-0000-00-0 VGA controller for CRT and LCD Flatpanels DIMM-PC/ETN1 08006-0000-01-0 Ethernetcontroller DIMM-PC/COM1 08006-0000-02-0 Two serial interfaces DIMM-PC/COMBO1 08006-0000-03-0 VGA, Ethernet and two serial interfaces ® DIMM-PC/Socket-CPU SPCDIMM Socket for DIMM-PC , 144 Pin (90 pcs. packed) ® DIMM-PC/Socket-I/O SIODIMM Socket for DIMM-PC I/O module 144 Pin (90 pcs. packed) JRC1 96047-0000-00-0 Remote Control Software with serial Cable (License charge once to pay!) ® JUMPtec Industrielle Computertechnik AG +++ Brunnwiesenstr. 16 +++ 94469 Deggendorf +++ Phone +49 (0) 991-37024-0 +++ Fax 37024-102 +++ www.jumptec.de +++ 2-6 40 mm (1.6“)