KONTRON 07024-0000-26-4
Specifications
Auto Display
JIPA
chache
512 kByte
CPU
Intel Mobile Pentium MMX 266 MHz
Dimensions
175x125x20 mm (6.9x4.9x0.8“)
DRAM
1 DIMM socket up to 256 MByte SDRAM, space saving version
Ethernet
10/100Base-T Twisted Pair (RJ45)
Hard Disk
EIDE interface Ultra33 DMA mode, 1x 40pin, 1x 44pin
IRDA interface
Sharp-IR and IRDA SIR
MAX humidity
operation:10% to 90%; storage: 5% to 95% (non condensing)
Parallel port
EPP/ECP, bi-directional
Resolutions
VGA 640x480 16 Mio. colors, SVGA 800x600 16 Mio. colors, XGA 1024x768 64 k colors, SXGA 1280x1024 256 colors
Serial Interfaces
4xRS232 (16 Byte FIFO), COM4 as RS232 or RS485
Sound
Soundblaster compatible Full duplex Line In and Line Out Stereo Mic In Mono 3D audio effect
USB
2x
Video controller
Simultaneous operation of LCD and CRT monitor possible
Video RAM
2 MByte
Datasheet
Extracted Text
coolMONSTER/S COM RS485 CRT Sound connector Ethernet 512 kByte L2 (Twisted Pair, RJ45) Burst Cache USB Keyboard PS2-mouse JIPA display interface on the bottom side of the board. up to AGP high speed graphic 256 MByte SDRAM controller (64 bit) C&T 69000 with flat panel support less than 2 cm (0.8“) height with installed SDRAM Module fanless Pentium MMX - no moving parts total height < 20mm 4x COM and Sound onboard If it‘s Embedded, it‘s Kontron. COM 3-4 (RS232C) COM 1-2 (RS232C) Floppy Fan (12 V) Printer LPT System connector EIDE (2mm) EIDE (2,54mm) IRDA coolMONSTER/S Product Overview he coolMONSTER (CMP/S) is a „all in one” Intel® operate CRT monitors and LCD fl at panels (mono, STN Pentium® MMX™ based slot PC with consistent low and TFT) in parallel. Flatpanel displays with resolutions power design. Despite the very compact half size format up to 1280x1024 can be connected easily without it‘s possible to integrate the PISA (PISA=PCI+ISA) dealing with jumper settings or display timings. The bus and a full featured set of interfaces. The low JIPA interface, developed by JUMPtec®, provides an power Version of the Intel® Pentium® processor allows autodetect mode, which initializes the video controller the usage of the board without active cooling in according to the connected display automatically. 2 applications, where reliability and space limitations MByte of video memory are already integrated on the are major requirements. It is now possible to create graphic controller. Two EIDE ports are available to systems, combining high CPU performance with low support various mass storage devices. The JUMPtec® power consumption. Beside all standard interfaces chipDISK, a IDE compatible fl ash disk up to 96 MByte, (four serial ports, one as RS232 or RS485, EPP/ECP can be attached directly. Additionally the coolMONSTER parallel port, fl oppy, EIDE, USB and IRDA port) a is equipped with a 10/100Base-T Ethernet (Twisted Soundblaster compatible Soundchip and a high speed Pair). For operation in safety relevant applications, an AGP video controller (C&T 69000) is available. It can intelligent watchdog is integrated as well. Technical Information CPU Automatic display detection Intel® Mobile Pentium® MMX™ 266 MHz JIPA DRAM Serial interfaces 1 DIMM socket up to 256 MByte 4xRS232 (16 Byte FIFO), COM4 as RS232 or RS485 Parallel port SDRAM, space saving version EPP/ECP, bi-directional Cache 512 kByte Floppy interface Sound Soundblaster compatible Full duplex Line In and Line Out Stereo Mic In Harddisk EIDE interface Ultra33 DMA mode, 1x 40pin, 1x 44pin Mono 3D audio effect processor Ethernet High Speed AGP video controller 10/100Base-T Twisted Pair (RJ45) Simultaneous operation of LCD and CRT monitor possible USB port Drives all kinds 2x of flat displays (mono LCD,TFT,STN...) of various vendors IRDA interface Resolutions CRT and LCD Sharp-IR and IRDA SIR VGA 640x480 16 Mio. colors, SVGA 800x600 16 Mio. colors, Dimensions XGA 1024x768 64 k colors, SXGA 1280x1024 256 colors 175x125x20 mm (6.9x4.9x0.8“) Video RAM Temperature 2 MByte operation: 0° to 60°C, CPU: 0 to 95°C Low power consumption max. 2.1 A (10.5 W) storage: -10° to 85°C with 266 MHz CPU, 32 MByte SDRAM, (DOS prompt, typ.) Max. humidity operation:10% to 90%; storage: 5% to 95% (non condensing) Ordering Information Article Part.-No. Description CMP/S266L-E4 07024-0000-26-4 coolMONSTER 266 MHz, Ethernet, sound, 4x serial Corporate Offices US/ Canada Asia Pacific Europe, Middle East & Africa 6260 Sequence Drive 5F-1, 341, Sec 4, Chung Hsiao E. Brunnwiesenstr. 16 San Diego, CA 92121-4371 Rd, Taipei, Taiwan 94469 Deggendorf - Germany Tel.: +49 (0)991/ 370 24-100 Tel.: (858) 677-0877 Tel: +886 2 2781 5791 Fax: +49 (0)991/ 370 24-102 Fax: (858) 677-0898 Fax: +886 2 2741 7379 sales@us.kontron.com sales@kontron.com.tw sales-kem@kontron.com www.kontron.com #coolMONSTER/S#040816pda All data is for information purposes only and not guaranteed for legal purposes. Subject to change without notice. Information in this datasheet has been carefully checked and is believed to be accurate; however, no responsibilty is assumed ® ® for inaccurancies. All brand or product names are trademarks or registered trademarks of their respective owners. DIMM-PC and JUMPtec are registered trademarks of Kontron Embedded Modules GmbH, Germany. Rev #WEBtoNET-030301-e
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the 07024-0000-26-4 have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
Related Products

Kontron 07025-0000 CPU Board - coolMONSTER/P3 All-In-One Half Size Intel Celeron and Intel Pentium I...

Kontron 07025-0000-30-1 CPU Board. Intel ULP Celeron 300 MHz | Fanless | 4 MByte AGP Graphic | 4xCOM...

Kontron 07028-0000-60-1 VIA Eden 600 MHz. TwisterT chipset for CRT/LCD, 32MByte VRAM, 4xCOM, USB, So...
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods