KLOCKNER MOELLER PI-25/I/SVB
Specifications
Contact Current AC Max
32A
Contact Voltage AC Max
440V
Current Rating
32A
External Depth
115mm
External Length/Height
160mm
External Width
100mm
IP/NEMA Rating
IP55
Material
Thermoplastic
No. of Mechanical Operations
1000000
No. of Poles
3
Operating Temperature Max
50°C
Operating Temperature Min
-25°C
Operating Voltage
690VAC
SVHC
No SVHC (18-Jun-2012)
Switching AC3 Power Max
15kW
Datasheet
Extracted Text
Type: T0−2−1/I1/SVB Article No.: 207147 Sales text ON−OFF SWITCH Ordering information BME−CAT Fotos Produktgruppen−Bezeichnung T0−... Load current switches Main switches, maintenance switches Design Surface mounting Basic type for ... insert mounting form T0−2−1/... Mounting form I1/SVB No. of poles M 3 Description As Emergency−Stop device General IEC/EN 60947, VDE 0660, IEC/EN 60204, CSA, UL Switch−disconnectors to Standards IEC/EN 60947−3 Load−break switches to IEC/EN 60947−3 6 Lifespan, mechanical Operations × 10 1 Maximum operating frequency Operations/h 3000 Climatic proofing Damp heat, constant, to IEC 60068−2−78; Damp heat, 1 cyclical, to IEC 60068−2−30 Ambient temperature Open °C –25...50 Enclosed °C –25...40 Mounting position As required Mechanical shock resistance to Half−sinusoidal g > 15 IEC 60068−2−27 shock 20 ms Contacts Rated operational voltage U V AC 690 e Rated impulse withstand voltage U V AC 6000 imp Overvoltage category/pollution III/3 degree Rated uninterrupted current open I A 20 u Enclosed I A 20 u Load rating with intermittent operation, class 12 AB 25 % DF × I 2 e AB 40 % DF × I 1,6 e AB 60 % DF × I 1,3 e Short−circuit rating Fuse A gG/gL 20 Rated short−time withstand I A 320 cw rms current (1 s current) Safe isolation to VDE 0106 Part 101 and Part 101/A1 between the contacts V AC 440 90 60 Switching angles ° 45 30 Contact units 11 Double−break contacts max. 22 Current heat loss per contact at W 0,6 I e Terminal capacities 1 × (1 – 2.5) 2 Solid or stranded mm 2 × (1 – 2.5) Flexible with ferrule to DIN 1 × (0.75 – 1.5) 2 mm 46228 2 × (0.75 – 1.5) Terminal screw M3.5 2 Tightening torque Nm 1 Switching capacity AC Rated making capacity cos = A 130 0.35 Rated breaking capacity, motor load switch cos = 0.35 230 V A 100 400 V A 110 500 V A 80 690 V A 60 Rated operational current 440 V I A 20 e load−break switch AC−21A AC−3 motor load switch motor rating 230 V P kW 3 230 V Star−delta P kW 4 400 V P kW 4 400 V Star−delta P kW 5,5 500 V P kW 5,5 500 V Star−delta P kW 7,5 690 V P kW 4 690 V Star−delta P kW 5,5 AC−23A Motor load switches (main switches maintenance switches) 230 V P kW 3,5 400 V P kW 6,5 500 V P kW 13 Rated operational current control switch AC−15 230 V I A 6 e 400 V I A 4 e 500 V I A 2 e DC DC−1, Load−break switches L/R = 1 ms Rated operational current I A 10 e Voltage per contact pair in series V 60 DC−21A 3 Rated operational current 240 V I A 1 e 240 V Contacts Quantity 1 DC−23A, motor load switch L/R = 15 ms 24 V Rated operational current I A 10 e Contacts Quantity 1 48 V Rated operational current I A 10 e Contacts Quantity 2 60 V Rated operational current I A 10 e Contacts Quantity 3 120 V Rated operational current I A 5 e Contacts Quantity 3 240 V Rated operational current I A 5 e Contacts Quantity 5 DC−13, Control switches L/R = 50 ms Rated operational current I A 10 e Voltage per contact pair in series V 32 −5 Control circuit reliability at 24 V < 10 , < 1 fault in 100000 Fault probability H F DC, 10 mA operations Notes Notes For mechanical shock resistance: T3.../I... >12g Applies to T0(3).../SVB: isolating characteristics to IEC/EN 60947 Ufor rated operational voltage up to 500 V AC Applies to rated uninterrupted current I of u the contact: with T5−4−8344/I5 max. 95 A For terminal capacity solid, stranded and flexible: T0(3), (6), (8)...: Maximum of 2 cross−section sizes difference admissible between 2 conductors T5(B)−...: Maximum of 1 4 cross−section size difference admissible between 2 conductors For type T8−3−8342/... the following applies: switching angle = 90° and flat connection = 1 busbar 25 × 5 or 2 busbars 20 × 3 Dimensions Depth of one contact unit: 9.5 mm Dimensions Diameter of drilled hole Bottom Dimensions 5 3 Padlocks Characteristic curve For utilisation category AC−4 (extreme load: 100 % inching, reversing or plugging) The blocked rotor current of the motor should not exceed the rated current of the switch for AC−21A to ensure a reasonable device lifespan. Moeller GmbH, Hein−Moeller−Str. 7−11, D−53115 Bonn E−Mail: catalog@moeller.net, Internet: www.moeller.net, http://catalog.moeller.net HPL−C2007G V2.1 © 2007 by Moeller GmbH 6
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the PI-25/I/SVB have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods