KILLARK XAL-53
Features
- Bilingual nameplates included per CSA requirement.
- Conduit openings are 3/4" (19.05 mm) NPT feed-through.
- Enclosure is made of copper-free aluminum alloy.
- Internal ground screw is standard.
- Red, textured powder epoxy paint finish is standard on box and cover and provides high visibility for alarm station.
- Universal (1) normally open and (1) normally closed contact furnished standard.
- Wiring range is #12 AWG through #24 AWG, solid or stranded.
Datasheet
Extracted Text
DF-51861:A2 • F-400 XAL-53 Hazardous Location Pull Station Conventional Initiating Devices Applications KILLARK® fire alarm stations are suitable for: • Hazardous areas due to the presence of flammable gases or vapors, combustible dusts or easily ignitable fibers or fly- ings. • Installation at petroleum refineries, chemical and petro- chemical plants, storage areas, and other processing facili- ties where hazardous substances are handled and stored. • Areas where emergency control of fire alarm or signal cir- cuits is required. Features • Enclosure is made of copper-free aluminum alloy. • Conduit openings are 3/4" (19.05 mm) NPT feed-through. • Red, textured powder epoxy paint finish is standard on box and cover and provides high visibility for alarm station. • Universal (1) normally open and (1) normally closed contact furnished standard. • Bilingual nameplates included per CSA requirement. XAL-53 • Internal ground screw is standard. Explosion-Proof Pull Station with Pull Ring • Wiring range is #12 AWG through #24 AWG, solid or stranded. • Dow Corning Molykote™ 33 Grease, light consistency, to operator shaft. Operation 2. Keep all flanges clean and free of scratches. The alarm station is activated by lifting the front cover and pull- 3. Some internal service parts are available. Consult the ing down ring. This quick, easy-to-use two-step process pre- Killark factory for parts breakdowns. vents unintentional operation. Operator is reset by depressing shaft and returning plate to original position. Agency Listings and Approvals These listings and approvals apply to the modules specified in Hazardous Area Classifications this document. In some cases, certain modules or applications • Class I, Divison 1 and 2, Groups C and D. may not be listed by certain approval agencies, or listing may • Class I, Zones 1 and 2, Groups IIB, IIA. be in process. Consult factory for latest listing status. • Class II, Division 1 and 2, Group E, F, and G. • UL Listed: E50498 • Class III, Hazardous Locations. • ULC Listed: E50498 •NEMA 7CD, 9EFG. • CSA: LR31085 • CSFM: 7150-1439:100 Operational Data This enclosure is made of cast, copper-free aluminum alloy. It Contact Arrangement is suitable for: Class I, Groups C and D; Class II, Groups E, F, and G; and Class III hazardous locations. All installations Not Activated Position must comply with applicable local and/or National Electrical Code. Like all electromechanical devices, these control stations require occasional maintenance. Parts may wear out or become defective due to adverse environmental conditions. 5274con1.wmf See Maintenance Data below. Maintenance Data Activated Position CAUTION: Disconnect this device from the supplying circuit before removing the cover. 1. To prevent corrosion, lubricant should be occasionally applied, as follows: • Killark® “LUBG” lubricant to box/cover flanges. 5274con2.wmf DF-51861:A2 • 1/12/10 — Page 1 of 2 5274pho.jpg Contact Block Rating AC DC Continuous Continuous Make Break Volts VA VA Carrying Volts Make Break Carrying Amperes Amperes Amperes Amperes 120 60 7200 6.0 720 10 125 1.10 10 240 30 7200 3.0 720 10 250 0.55 10 480 15 7200 1.5 720 10 600 0.20 10 600 12 7200 1.2 720 10 3" (76.2 mm) 4-1/2" (114.3 mm) 2-1/4" 2-1/4" (57.15 mm) 1" (57.15 mm) (25.4 mm) 5-3/8" 4-5/8" 6-3/8" (136.53 mm) (117.48 mm) (161.93 mm) 5/8" dia. (7.94 mm) (2 holes) Product Line Information XAL-53: Explosion-proof, N/O and N/C Contacts. FireLite® is a registered trademark of Honeywell International Inc. KILLARK® is a registered trademark of Hubbell®. Molykote™ is a trademark of the Dow Corning Corporation. ©2010 by Honeywell International Inc. All rights reserved. Unauthorized use of this document is strictly prohibited. This document is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications are subject to change without notice. Made in the U.S. A. For more information, contact Fire•Lite Alarms. Phone: (800) 627-3473, FAX: (877) 699-4105. www.firelite.com Page 2 of 2 — DF-51861:A2 • 1/12/10 5274dim1.tif
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the XAL-53 have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods